Publications

S. Bertlein, G. Hochleitner, M. Schmitz, J. Tessmar, M. Raghunath, P. D. Dalton and J. Groll (2019). “Permanent Hydrophilization and Generic Bioactivation of Melt Electrowritten Scaffolds.” Adv Healthc Mater 8(7): e1801544.

J. Blöhbaum, I. Paulus, A.-C. Pöppler, J. Tessmar and J. Groll (2019). “Influence of charged groups on the cross-linking efficiency and release of guest molecules from thiol–ene cross-linked poly(2-oxazoline) hydrogels.” Journal of Biomaterials Chemistry B.

T. Bruckner, A. Fuchs, L. Wistlich, A. Hoess, B. Nies and U. Gbureck (2019). “Prefabricated and Self-Setting Cement Laminates.” Materials (Basel) 12(5).

Brueckner, T., P. Heilig, M. C. Jordan, M. M. Paul, T. Blunk, R. H. Meffert, U. Gbureck and S. Hoelscher-Doht (2019). “Biomechanical Evaluation of Promising Different Bone Substitutes in a Clinically Relevant Test Set-Up.” Materials (Basel, Switzerland) 12(9).

J. Ertl, M. E. Ortiz-Soto, T. A. Le, J. Bechold, J. Shan, J. Tessmar, B. Engels and J. Seibel (2019). “Tuning the Product Spectrum of a Glycoside Hydrolase Enzyme by a Combination of Site-Directed Mutagenesis and Tyrosine-Specific Chemical Modification.” Chemistry.

Florczak, S., T. Lorson, T. Zheng, M. Mrlik, D. W. Hutmacher, M. J. Higgins, R. Luxenhofer and P. D. Dalton (2019). “Melt electrowriting of electroactive poly(vinylidene difluoride) fibers.” Polymer International 68(4): 735-745.

A. Fuchs, A. Youssef, A. Seher, S. Hartmann, R. C. Brands, U. D. A. Müller-Richter, A. C. Kübler and C. Linz (2019). “A new multilayered membrane for tissue engineering of oral hard- and soft tissue by means of melt electrospinning writing and film casting – an in vitro study.” Journal of Cranio-Maxillofacial Surgery.

A. Fuchs, A. Youssef, A. Seher, G. Hochleitner, P. D. Dalton, S. Hartmann, R. C. Brands, U. D. A. Muller-Richter and C. Linz (2019). “Medical-grade polycaprolactone scaffolds made by melt electrospinning writing for oral bone regeneration – a pilot study in vitro.” BMC Oral Health 19(1): 28.

Kotz, F., P. Risch, K. Arnold, S. Sevim, J. Puigmarti-Luis, A. Quick, M. Thiel, A. Hrynevich, P. D. Dalton, D. Helmer and B. E. Rapp (2019). “Fabrication of arbitrary three-dimensional suspended hollow microstructures in transparent fused silica glass.” Nat Commun 10(1): 1439.

R. McMaster, C. Hoefner, A. Hrynevich, C. Blum, M. Wiesner, K. Wittmann, T. R. Dargaville, P. Bauer-Kreisel, J. Groll, P. D. Dalton and T. Blunk (2019). “Tailored Melt Electrowritten Scaffolds for the Generation of Sheet-Like Tissue Constructs from Multicellular Spheroids.” Adv Healthc Mater 8(7): e1801326.

M. Meininger, C. Moseke, K. Spatz, E. März, C. Blum, A. Ewald and E. Vorndran (2019). “Effect of strontium substitution on the material properties and osteogenic potential of 3D powder printed magnesium phosphate scaffolds ” Materials Science and Engineering C 98: 1145 – 1158

No, Y. J., I. Holzmeister, Z. Lu, S. Prajapati, J. Shi, U. Gbureck and H. Zreiqat (2019). “Effect of Baghdadite Substitution on the Physicochemical Properties of Brushite Cements.” Materials (Basel, Switzerland) 12(10).

Noy, J.-M., Y. Li, W. Smolan and P. J. Roth (2019). “Azide–para-Fluoro Substitution on Polymers: Multipurpose Precursors for Efficient Sequential Postpolymerization Modification.” Macromolecules 52(8): 3083-3091.

Roedel, M., J. Tessmar, J. Groll and U. Gbureck (2019). “Tough and Elastic alpha-Tricalcium Phosphate Cement Composites with Degradable PEG-Based Cross-Linker.” Materials 12(1).

M. Ryma, J. Blohbaum, R. Singh, A. Sancho, J. Matuszak, I. Cicha and J. Groll (2019). “Easy-to-Prepare Coating of Standard Cell Culture Dishes for Cell-Sheet Engineering Using Aqueous Solutions of Poly(2-n-propyl-oxazoline).” Acs Biomaterials Science & Engineering 5(3): 1509-1517.

N. Schaefer, D. Janzen, E. Bakirci, A. Hrynevich, P. D. Dalton and C. Villmann (2019). “3D Electrophysiological Measurements on Cells Embedded within Fiber-Reinforced Matrigel.” Adv Healthc Mater 8(5): e1801226.

T. Tylek, T. Schilling, K. Schlegelmilch, M. Ries, M. Rudert, F. Jakob and J. Groll (2019). “Platelet lysate outperforms FCS and human serum for co-culture of primary human macrophages and hMSCs.” Sci Rep 9(1): 3533.

Wunner, F. M., S. Eggert, J. Maartens, O. Bas, P. D. Dalton, E. M. De-Juan-Pardo and D. W. Hutmacher (2019). “Design and Development of a Three-Dimensional Printing High-Throughput Melt Electrowriting Technology Platform.” 3D Printing and Additive Manufacturing 6(2): 82-90.

Wunner, F. M., P. Mieszczanek, O. Bas, S. Eggert, J. Maartens, P. D. Dalton, E. M. De-Juan-Pardo and D. W. Hutmacher (2019). “Printomics: the high-throughput analysis of printing parameters applied to melt electrowriting.” Biofabrication 11(2): 025004.

Youssef, A., A. Hrynevich, L. Fladeland, A. Balles, J. Groll, P. D. Dalton and S. Zabler (2019). “The Impact of Melt Electrowritten Scaffold Design on Porosity Determined by X-ray Micro-tomography.” Tissue Eng Part C Methods 0(ja): null.

S. Bertlein, D. Hikimoto, G. Hochleitner, J. Hummer, T. Jungst, M. Matsusaki, M. Akashi and J. Groll (2018). “Development of Endothelial Cell Networks in 3D Tissues by Combination of Melt Electrospinning Writing with Cell-Accumulation Technology.” Small 14(2).

T. Bock, V. Schill, M. Krahnke, A. F. Steinert, J. Tessmar, T. Blunk and J. Groll (2018). “TGF-beta1-Modified Hyaluronic Acid/Poly(glycidol) Hydrogels for Chondrogenic Differentiation of Human Mesenchymal Stromal Cells.” Macromol Biosci 18(7): e1700390.

A. V. Boehm, S. Meininger, A. Tesch, U. Gbureck and F. A. Muller (2018). “The Mechanical Properties of Biocompatible Apatite Bone Cement Reinforced with Chemically Activated Carbon Fibers.” Materials (Basel) 11(2).

G. Bohm, J. Groll, K. H. Heffels, N. Heussen, P. Ink, H. P. Alizai, U. P. Neumann, R. Schnabel and U. Mirastschijski (2018). “Influence of MMP inhibitor GM6001 loading of fibre coated polypropylene meshes on wound healing: Implications for hernia repair.” J Biomater Appl 32(10): 1343-1359.

T. Bruckner, K. Hurle, A. Stengele, J. Groll and U. Gbureck (2018). “Mechanical activation and cement formation of trimagnesium phosphate.” Journal of the American Ceramic Society 101(5): 1830-1834.

M. Castilho, G. Hochleitner, W. Wilson, B. van Rietbergen, P. D. Dalton, J. Groll, J. Malda and K. Ito (2018). “Mechanical behavior of a soft hydrogel reinforced with three-dimensional printed microfibre scaffolds.” Sci Rep 8(1): 1245.

M. Castilho, A. van Mil, M. Maher, C. H. G. Metz, G. Hochleitner, J. Groll, P. A. Doevendans, K. Ito, J. P. G. Sluijter and J. Malda (2018). “Melt Electrowriting Allows Tailored Microstructural and Mechanical Design of Scaffolds to Advance Functional Human Myocardial Tissue Formation.” Advanced Functional Materials 28(40).

M. de Ruijter, A. Hrynevich, J. N. Haigh, G. Hochleitner, M. Castilho, J. Groll, J. Malda and P. D. Dalton (2018). “Out-of-Plane 3D-Printed Microfibers Improve the Shear Properties of Hydrogel Composites.” Small 14(8).

S. Feineis, J. Lutz, L. Heffele, E. Endl, K. Albrecht and J. Groll (2018). “Thioether-Polyglycidol as Multivalent and Multifunctional Coating System for Gold Nanoparticles.” Adv Mater 30(8).

H. Hildebrandt, O. Paloheimo, E. Mantyla, S. Willman, S. Hakanen, K. Albrecht, J. Groll, M. Moller and M. Vihinen-Ranta (2018). “Reactive Self-Assembly and Specific Cellular Delivery of NCO-sP(EO-stat-PO)-Derived Nanogels.” Macromol Biosci 18(10): e1800094.

G. Hochleitner, F. Chen, C. Blum, P. D. Dalton, B. Amsden and J. Groll (2018). “Melt electrowriting below the critical translation speed to fabricate crimped elastomer scaffolds with non-linear extension behaviour mimicking that of ligaments anhttps://doi.org/10.1016/j.actbio.2018.03.023d tendons.” Acta Biomater 72: 110-120.

G. Hochleitner, E. Fursattel, R. Giesa, J. Groll, H. W. Schmidt and P. D. Dalton (2018). “Melt Electrowriting of Thermoplastic Elastomers.” Macromol Rapid Commun 39(10): e1800055.

I. Holzmeister, M. Schamel, J. Groll, U. Gbureck and E. Vorndran (2018). “Artificial inorganic biohybrids: The functional combination of microorganisms and cells with inorganic materials.” Acta Biomater 74: 17-35.

R.E. Horch, A. Weigand, H. Wajant, J. Groll, A. R. Boccaccini and A. Arkudas (2018). “[Biofabrication: new approaches for tissue regeneration].” Handchir Mikrochir Plast Chir 50(2): 93-100.

A. Hrynevich, B. S. Elci, J. N. Haigh, R. McMaster, A. Youssef, C. Blum, T. Blunk, G. Hochleitner, J. Groll and P. D. Dalton (2018). “Dimension-Based Design of Melt Electrowritten Scaffolds.” Small 14(22): e1800232.

N. Huettner, T. R. Dargaville and A. Forget (2018). “Discovering Cell-Adhesion Peptides in Tissue Engineering: Beyond RGD.” Trends Biotechnol 36(4): 372-383.

K. Hurle, J. Weichhold, M. Brueckner, U. Gbureck, T. Brueckner and F. Goetz-Neunhoeffer (2018). “Hydration mechanism of a calcium phosphate cement modified with phytic acid.” Acta Biomater 80: 378-389.

B. Kanter, A. Vikman, T. Bruckner, M. Schamel, U. Gbureck and A. Ignatius (2018). “Bone regeneration capacity of magnesium phosphate cements in a large animal model.” Acta Biomater 69: 352-361.

S. Mandal, S. Meininger, U. Gbureck and B. Basu (2018). “3D powder printed tetracalcium phosphate scaffold with phytic acid binder: fabrication, microstructure and in situ X-Ray tomography analysis of compressive failure.” J Mater Sci Mater Med 29(3): 29.

E. McColl, J. Groll, T. Jungst and P. D. Dalton (2018). “Design and fabrication of melt electrowritten tubes using intuitive software.” Materials & Design 155: 46-58.

M. Meininger, S. Meininger, J. Groll, U. Gbureck and C. Moseke (2018). “Silver and copper addition enhances the antimicrobial activity of calcium hydroxide coatings on titanium.” J Mater Sci Mater Med 29(5): 61.

L. Moroni, T. Boland, J. A. Burdick, C. De Maria, B. Derby, G. Forgacs, J. Groll, Q. Li, J. Malda, V. A. Mironov, C. Mota, M. Nakamura, W. Shu, S. Takeuchi, T. B. F. Woodfield, T. Xu, J. J. Yoo and G. Vozzi (2018). “Biofabrication: A Guide to Technology and Terminology.” Trends Biotechnol 36(4): 384-402.

M. Nabiyouni, T. Bruckner, H. Zhou, U. Gbureck and S. B. Bhaduri (2018). “Magnesium-based bioceramics in orthopedic applications.” Acta Biomater 66: 23-43.

M. E. Ortiz-Soto, J. Ertl, J. Mut, J. Adelmann, T. A. Le, J. Shan, J. Tessmar, A. Schlosser, B. Engels and J. Seibel (2018). “Product-oriented chemical surface modification of a levansucrase (SacB) via an ene-type reaction.” Chem Sci 9(24): 5312-5321.

E. B. Petcu, R. Midha, E. McColl, A. Popa-Wagner, T. V. Chirila and P. D. Dalton (2018). “3D printing strategies for peripheral nerve regeneration.” Biofabrication 10(3): 032001.

B. Rentsch, A. Bernhardt, A. Henss, S. Ray, C. Rentsch, M. Schamel, U. Gbureck, M. Gelinsky, S. Rammelt and A. Lode (2018). “Trivalent chromium incorporated in a crystalline calcium phosphate matrix accelerates materials degradation and bone formation in vivo.” Acta Biomater 69: 332-341.

M. Rödel, K. Baumann, J. Groll and U. Gbureck (2018). “Simultaneous structuring and mineralization of silk fibroin scaffolds.” J Tissue Eng 9: 2041731418788509.

Rödel, M., S. Meininger, J. Groll and U. Gbureck (2018). Bioceramics as drug delivery systems. Fundamental Biomaterials: Ceramics. S. Thomas, P. Balakrishnan and M. S. Sreekala, Woodhead Publishing: 153-194.

M. Rödel, J. Tessmar, J. Groll and U. Gbureck (2018). “Highly flexible and degradable dual setting systems based on PEG-hydrogels and brushite cement.” Acta Biomater 79: 182-201.

F. Rudnitzki, S. Feineis, R. Rahmanzadeh, E. Endl, J. Lutz, J. Groll and G. Huttmann (2018). “siRNA release from gold nanoparticles by nanosecond pulsed laser irradiation and analysis of the involved temperature increase.” J Biophotonics 11(9): e201700329.

K. Stuckensen, A. Schwab, M. Knauer, E. Muinos-Lopez, F. Ehlicke, J. Reboredo, F. Granero-Molto, U. Gbureck, F. Prosper, H. Walles and J. Groll (2018). “Tissue Mimicry in Morphology and Composition Promotes Hierarchical Matrix Remodeling of Invading Stem Cells in Osteochondral and Meniscus Scaffolds.” Adv Mater 30(28): e1706754.

A. Van Mil, M. Castilho, M. Maher, C. H. Metz, R. G. C. Maas, G. Hochleitner, J. Groll, K. Ito, J. Malda and J. P. G. Sluijter (2018). “Engineering myocardial tissue in vitro using stretchable microfiber scaffolds and human iPSC-derived cardiomyocytes.” Cardiovascular Research 114: S112-S112.

S. Wang, P. D. Dalton and T. R. Dargaville (2018). “Spatial Patterning of Hydrogels via 3D Covalent Transfer Stamping from a Fugitive Ink.” Macromol Rapid Commun 39(4).

M. Weis, J. Shan, M. Kuhlmann, T. Jungst, J. Tessmar and J. Groll (2018). “Evaluation of Hydrogels Based on Oxidized Hyaluronic Acid for Bioprinting.” gels 4(82).

C. Wiegand, A. Volpel, A. Ewald, M. Remesch, J. Kuever, J. Bauer, S. Griesheim, C. Hauser, J. Thielmann, S. Tonndorf-Martini, B. W. Sigusch, J. Weisser, R. Wyrwa, P. Elsner, U. C. Hipler, M. Roth, C. Dewald, C. Ludecke-Beyer and J. Bossert (2018). “Critical physiological factors influencing the outcome of antimicrobial testing according to ISO 22196 / JIS Z 2801.” PLoS One 13(3): e0194339.

F. M. Wunner, M. L. Wille, T. G. Noonan, O. Bas, P. D. Dalton, E. M. De-Juan-Pardo and D. W. Hutmacher (2018). “Melt Electrospinning Writing of Highly Ordered Large Volume Scaffold Architectures.” Adv Mater 30(20): e1706570.

Z. S. Zhang, S. Y. Ye, U. Gbureck, J. E. Barralet and G. Merle (2018). “Cavitation Mediated 3D Microstructured Architectures from Nanocarbon.” Advanced Functional Materials 28(19).

I. Zilkowski, I. Theodorou, K. Albrecht, F. Duconge and J. Groll (2018). “Subtle changes in network composition impact the biodistribution and tumor accumulation of nanogels.” Chem Commun (Camb) 54(83): 11777-11780.

B. Baumann, T. Jungst, S. Stichler, S. Feineis, O. Wiltschka, M. Kuhlmann, M. Linden and J. Groll (2017). “Control of Nanoparticle Release Kinetics from 3D Printed Hydrogel Scaffolds.” Angew Chem Int Ed Engl 56(16): 4623-4628.

A. Bernhardt, M. Schamel, U. Gbureck and M. Gelinsky (2017). “Osteoclastic differentiation and resorption is modulated by bioactive metal ions Co2+, Cu2+ and Cr3+ incorporated into calcium phosphate bone cements.” Plos One 12(8).

S. Bertlein, G. Brown, K. S. Lim, T. Jungst, T. Boeck, T. Blunk, J. Tessmar, G. J. Hooper, T. B. F. Woodfield and J. Groll (2017). “Thiol-Ene Clickable Gelatin: A Platform Bioink for Multiple 3D Biofabrication Technologies.” Adv Mater.

C. Blum,  T. Bruckner, A. Ewald, A. Ignatius and U. Gbureck (2017). “Mg:Ca ratio as regulating factor for osteoclastic in vitro resorption of struvite biocements.” Mater. Sci. & Eng. C 73: 111-119.

G. H. Bode, G. Coue, C. Freese, K. E. Pickl, M. Sanchez-Purra, B. Albaiges, S. Borros, E. C. van Winden, L. A. Tziveleka, Z. Sideratou, J. F. J. Engbersen, S. Singh, K. Albrecht, J. Groll, M. Moller, A. J. G. Potgens, C. Schmitz, E. Frohlich, C. Grandfils, F. M. Sinner, C. J. Kirkpatrick, H. W. M. Steinbusch, H. G. Frank, R. E. Unger and P. Martinez-Martinez (2017). “An in vitro and in vivo study of peptide-functionalized nanoparticles for brain targeting: The importance of selective blood-brain barrier uptake.” Nanomedicine 13(3): 1289-1300.

R. A. V. Bolanos, S. M. Cokelaere, J. M. E. McDermott, K. E. M. Benders, U. Gbureck, S. G. M. Plomp, H. Weinans, J. Groll, P. R. van Weeren and J. Malda (2017). “The use of a cartilage decellularized matrix scaffold for the repair of osteochondral defects: the importance of long-term studies in a large animal model.” Osteoarthritis and cartilage 25(3): 413-420.

M. Castilho,  D. Feyen, M. Flandes-Iparraguirre, G. Hochleitner, J. Groll, P. A. F. Doevendans, T. Vermonden, K. Ito, J. P. G. Sluijter and J. Malda (2017). “Melt Electrospinning Writing of Poly-Hydroxymethylglycolide-co-epsilon-Caprolactone-Based Scaffolds for Cardiac Tissue Engineering.” Adv Healthc Mater 6(18).

M. Castilho, J. Rodrigues, E. Vorndran, U. Gbureck, C. Quental, J. Folgado and P. R. Fernandes (2017). “Computational design and fabrication of a novel bioresorbable cage for tibial tuberosity advancement application.” Journal of the Mechanical Behavior of Biomedical Materials 65: 344-355.

S. C. Cox, S. Patel, U. Gbureck, A. J. Wright and L. M. Grover (2017). “A cohesive premixed monetite biocement.” Journal of the American Ceramic Society 100(3): 1241-1249.

P. D. Dalton, (2017). “Melt electrowriting with additive manufacturing principles.” Current Opinion in Biomedical Engineering 2: 49-57.

J. Drager, J. L. Ramirez-GarciaLuna, A. Kumar, U. Gbureck, E. J. Harvey and J. E. Barralet (2017). “Hypoxia Biomimicry to Enhance Monetite Bone Defect Repair.” Tissue engineering. Part A.

M. Glogger, S. Stichler, I. Subota, S. Bertlein, M. C. Spindler, J. Teßmar, J. Groll, M. Engstler and S. F. Fenz (2017). “Live-cell super-resolution imaging of intrinsically fast moving flagellates.” Journal of Physics D: Applied Physics 50(7).

J. N. Haigh, T. R. Dargaville and P. D. Dalton (2017). “Additive manufacturing with polypropylene microfibers.” Materials Science and Engineering: C 77: 883-887.

F. Hansske, O. Bas, C. Vaquette, G. Hochleitner, J. Groll, E. Kemnitz, D. W. Hutmacher and H. G. Boerner (2017). “Via precise interface engineering towards bioinspired composites with improved 3D printing processability and mechanical properties.” Journal of Materials Chemistry B 5(25): 5037-5047.

A. Henss, M. Schamel, U. Gbureck, M. Gelinsky and A. Lode (2017). “Data on TOF-SIMS analysis of Cu2+, Co2+ and Cr3+ doped calcium phosphate cements.” Data in brief 13: 353-355.

G. Hochleitner, M. Kessler, M. Schmitz, A. R. Boccaccini, J. Teßmar and J. Groll (2017). “Melt electrospinning writing of defined scaffolds using polylactide-poly(ethylene glycol) blends with 45S5 bioactive glass particles.” Materials Letters 205: 257-260.

A. Janikowska, J. Matuszak, S. Lyer, E. Schreiber, H. Unterweger, J. Zaloga, J. Groll, C. Alexiou and I. Cicha (2017). “A novel human artery model to assess the magnetic accumulation of SPIONs under flow conditions.” Scientific Reports 7.

T. Lorson, S. Jaksch, M. M. Lubtow, T. Jungst, J. Groll, T. Luhmann and R. Luxenhofer (2017). “A Thermogelling Supramolecular Hydrogel with Sponge-Like Morphology as a Cytocompatible Bioink.” Biomacromolecules.

T. C. Lühmann, L. Meinel, J. Groll and P. D. Dalton (2017). 4.29 Electrospun Fibers for Drug Delivery Comprehensive Biomaterials II. P. Ducheyne. Oxford, Elsevier. 4: 527-548.

L. C. Martine, B. M. Holzapfel, J. A. McGovern, F. Wagner, V. M. Quent, P. Hesami, F. M. Wunner, C. Vaquette, E. M. De-Juan-Pardo, T. D. Brown, B. Nowlan, D. J. Wu, C. O. Hutmacher, D. Moi, T. Oussenko, E. Piccinini, P. W. Zandstra, R. Mazzieri, J. P. Levesque, P. D. Dalton, A. V. Taubenberger and D. W. Hutmacher (2017). “Engineering a humanized bone organ model in mice to study bone metastases.” Nat Protoc 12(4): 639-663.

S. Meininger, C. Blum, M. Schamel, J. E. Barralet, A. Ignatius and U. Gbureck (2017). “Phytic acid as alternative setting retarder enhanced biological performance of dicalcium phosphate cement in vitro.” Sci. Rep. 7.

M. L. Muerza-Cascante, A. Shokoohmand, K. Khosrotehrani, D. Haylock, P. D. Dalton, D. W. Hutmacher and D. Loessner (2017). “Endosteal-like extracellular matrix expression on melt electrospun written scaffolds.” Acta Biomater 52: 145-158.

N. Paxton, W. Smolan, T. Böck, F. P. Melchels, J. Groll and T. Juengst (2017). “Proposal to Assess Printability of Bioinks for Extrusion-Based Bioprinting and Evaluation of Rheological Properties Governing Bioprintability” Biofabrication 

A. Sancho, Vandersmissen, I., Craps, S., Luttun, A., Groll, J. (2017). “A new strategy to measure intercellular adhesion forces in mature cell-cell contacts.” Scientific Reports 7.

M. Schamel, J. E. Barralet, M. Gelinsky, J. Groll and U. Gbureck (2017). “Intrinsic 3D Prestressing: A New Route for Increasing Strength and Improving Toughness of Hybrid Inorganic Biocements.” Advanced Materials

M. Schamel, J. E. Barralet, J. Groll and U. Gbureck (2017). “In vitro ion adsorption and cytocompatibility of dicalcium phosphate ceramics.” Biomaterials research 21: 10-10.

M. Schamel, A. Bernhardt, M. Quade, C. Wuerkner, U. Gbureck, C. Moseke, M. Gelinsky and A. Lode (2017). “Cu2+, Co2+ and Cr3+ doping of a calcium phosphate cement influences materials properties and response of human mesenchymal stromal cells.” Materials Science & Engineering C-Materials for Biological Applications 73: 99-110.

M. Schamel, J. Groll and U. Gbureck (2017). “Simultaneous formation and mineralization of star-P(EO-stat-PO) hydrogels.” Materials science & engineering. C, Materials for biological applications 75: 471-477.

M. Schumacher, L. Reither, J. Thomas, M. Kampschulte, U. Gbureck, A. Lode and M. Gelinsky (2017). “Calcium phosphate bone cement/mesoporous bioactive glass composites for controlled growth factor delivery.” Biomaterials Science.

S. Stichler, S. Bertlein, J. Tessmar, T. Jüngst and J. Groll (2017). “Thiol-ene Cross-Linkable Hydrogels as Bioinks for Biofabrication.” Macromolecular Symposia 372(1): 102-107.

S. Stichler, T. Bock, N. C. Paxton, S. Bertlein, R. Levato, V. Schill, W. Smolan, J. Malda, J. Tessmar, T. Blunk and J. Groll (2017). “Double printing of hyaluronic acid / poly(glycidol) hybrid hydrogels with poly(epsilon-caprolactone) for MSC chondrogenesis.” Biofabrication.

S. Stichler, T. Jungst, M. Schamel, I. Zilkowski, M. Kuhlmann, T. Bock, T. Blunk, J. Tessmar and J. Groll (2017). “Thiol-ene Clickable Poly(glycidol) Hydrogels for Biofabrication.” Ann Biomed Eng 45(1): 273-285.

T. Tylek,  K. Schlegelmilch, A. Ewald, M. Rudert, F. Jakob and J. Groll (2017). “Cell communication modes and bidirectional mitochondrial exchange in direct and indirect macrophage/hMSC co-culture models.” BioNanoMaterials 18(3-4).

L. Wistlich, J. Kums, A. Rossi, K. Heffels, H. Wajant and J. Groll (2017). Multimodal Bioactivation of Hydrophilic Electrospun Nanofibers Enabels Simultaneous Tuning of Cell Adhesivity and Immunomodulatory Effects. Advanced Functional Materials.

L. Wistlich, A. Rucker, M. Schamel, A. C. Kubler, U. Gbureck and J. Groll (2017). “A Bone Glue with Sustained Adhesion under Wet Conditions.” Advanced Healthcare Materials 6(3).

F. M. Wunner, O. Bas, N. T. Saidy, P. D. Dalton, E. M. D.-J. Pardo and D. W. Hutmacher (2017). “Melt Electrospinning Writing of Three-dimensional Poly(epsilon-caprolactone) Scaffolds with Controllable Morphologies for Tissue Engineering Applications.” Jove-Journal of Visualized Experiments(130).

A. Youssef, S. J. Hollister and P. D. Dalton (2017). “Additive manufacturing of polymer melts for implantable medical devices and scaffolds.” Biofabrication 9(1): 012002.

H. Zazo, C. I. Colino, K. T. Warzecha, M. Hoss, U. Gbureck, C. Trautwein, F. Tacke, J. M. Lanao and M. Bartneck (2017). “Gold Nanocarriers for Macrophage-Targeted Therapy of Human Immunodeficiency Virus.” Macromolecular Bioscience 17(3).

T. D. Brown, P. D. Dalton and D. W. Hutmacher (2016). “Melt electrospinning today: An opportune time for an emerging polymer process.” Progress in Polymer Science 56(Supplement C): 116-166.

T. Brueckner, M. Schamel, A. C. Kuebler, J. Groll and U. Gbureck (2016). “Novel bone wax based on poly(ethylene glycol)-calcium phosphate cement mixtures.” Acta Biomaterialia 33: 252-263.

F. Chen, G. Hochleitner, T. Woodfield, J. Groll, P. D. Dalton and B. G. Amsden (2016). “Additive Manufacturing of a Photo-Cross-Linkable Polymer via Direct Melt Electrospinning Writing for Producing High Strength Structures.” Biomacromolecules 17(1): 208-214.

C. Chintalapati, T. Keller, T. D. Mueller, V. Gorboulev, N. Schafer, I. Zilkowski, M. Veyhl-Wichmann, D. Geiger, J. Groll and H. Koepsell (2016). “Protein RS1 (RSC1A1) Downregulates the Exocytotic Pathway of Glucose Transporter SGLT1 at Low Intracellular Glucose via Inhibition of Ornithine Decarboxylase.” Mol Pharmacol 90(5): 508-521.

A. Cornelissen, M. Almalla, J. Schroeder, S. Mause, E. Liehn, N. Schaaps, J. Groll, N. Marx and F. Vogt (2016). “Vessel biofunctionalization to support endothelial regeneration: development of cRGD-loaded in-situ crosslinking 2-component hydrogels for endovascular trans-catheter application.” European Heart Journal 37: 880-880.

J. Groll, T. Boland, T. Blunk, J. A. Burdick, D. W. Cho, P. D. Dalton, B. Derby, G. Forgacs, Q. Li, V. A. Mironov, L. Moroni, M. Nakamura, W. Shu, S. Takeuchi, G. Vozzi, T. B. Woodfield, T. Xu, J. J. Yoo and J. Malda (2016). “Biofabrication: reappraising the definition of an evolving field.” Biofabrication 8(1): 013001.

J. N. Haigh, Y. M. Chuang, B. Farrugia, R. Hoogenboom, P. D. Dalton and T. R. Dargaville (2016). “Hierarchically Structured Porous Poly(2-oxazoline) Hydrogels.” Macromolecular Rapid Communications 37(1): 93-99.

G. Hochleitner, A. Youssef, A. Hrynevich, J. N. Haigh, T. Jungst, J. Groll and P. D. Dalton (2016). “Fibre pulsing during melt electrospinning writing.” BioNanoMaterials 17(3-4).

K. Hurle, T. Christel, U. Gbureck, C. Moseke, J. Neubauer and F. Goetz-Neunhoeffer (2016). “Reaction kinetics of dual setting alpha-tricalcium phosphate cements.” Journal of Materials Science-Materials in Medicine 27(1).

T. Jungst, W. Smolan, K. Schacht, T. Scheibel and J. Groll (2016). “Strategies and Molecular Design Criteria for 3D Printable Hydrogels.” Chem Rev 116(3): 1496-1539.

M. Kessler, E. Esser, J. Groll and J. Tessmar (2016). “Bilateral PLA/alginate membranes for the prevention of postsurgical adhesions.” J Biomed Mater Res B Appl Biomater 104(8): 1563-1570.

M. Kessler, J. Groll and J. Tessmar (2016). “Application of Linear and Branched Poly(Ethylene Glycol)-Poly(Lactide) Block Copolymers for the Preparation of Films and Solution Electrospun Meshes.” Macromol Biosci 16(3): 441-450.

A. Kumar, S. Mandal, S. Barui, R. Vasireddi, U. Gbureck, M. Gelinsky and B. Basu (2016). “Low temperature additive manufacturing of three dimensional scaffolds for bone-tissue engineering applications: Processing related challenges and property assessment.” Materials Science & Engineering R-Reports 103: III-39.

J. Lucas Aparicio, C. Rueda, A. Manchon, A. Ewald, U. Gbureck, M. Hamdan Alkhraisat, L. Blanco Jerez and E. Lopez Cabarcos (2016). “Effect of physicochemical properties of a cement based on silicocarnotite/calcium silicate on in vitro cell adhesion and in vivo cement degradation.” Biomedical Materials 11(4).

J. Malda and J. Groll (2016). “A Step Towards Clinical Translation of Biofabrication.” Trends Biotechnol 34(5): 356-357.

M. Meininger, T. Schmitz, T. Wagner, A. Ewald, U. Gbureck, J. Groll and C. Moseke (2016). “Real-time measurement of protein adsorption on electrophoretically deposited hydroxyapatite coatings and magnetron sputtered metallic films using the surface acoustic wave technique.” Materials Science & Engineering C-Materials for Biological Applications 61: 351-354.

M. Meininger, C. Wolf-Brandstetter, J. Zerweck, F. Wenninger, U. Gbureck, J. Groll and C. Moseke (2016). “Electrochemically assisted deposition of strontium modified magnesium phosphate on titanium surfaces.” Materials Science & Engineering C-Materials for Biological Applications 67: 65-71.

S. Meininger, T. Brückner and U. Gbureck (2016). “Comparative Study between Hand-Casted and 3D-Printed Brushite Bioceramic Scaffolds and Implants.” Ceramic Forum International: Berichte der Deutschen Keramischen Gesellschaft 93: E39-E42.

S. Meininger, S. Mandal, A. Kumar, J. Groll, B. Basu and U. Gbureck (2016). “Strength reliability and in vitro degradation of three-dimensional powder printed strontium-substituted magnesium phosphate scaffolds.” Acta Biomaterialia 31: 401-411.

A. Rossi, L. Wistlich, K. H. Heffels, H. Walles and J. Groll (2016). “Isotropic Versus Bipolar Functionalized Biomimetic Artificial Basement Membranes and Their Evaluation in Long-Term Human Cell Co-Culture.” Adv Healthc Mater 5(15): 1939-1948.

T. Scheibel, J. Groll, A. R. Boccaccini, T. Zehnder, T. Jungst and K. Schacht (2016). “Zellgewebe aus dem Drucker.” Nachrichten aus der Chemie 64(1): 13-16.

A. F. Steinert, M. Kunz, J. Reboredo, H. Walles, J. Groll, M. Rudert and M. Weissenberger (2016). “DIFFERENT TYPES OF NEO-CARTILAGE TISSUE FABRICATED FROM GENETICALLY-MODIFIED MESENCHYMAL STEM CELLS IN COLLAGEN HYDROGELS USING OF TGF-BETA1, SOX-9 OR BMP-2 CDNA.” Osteoarthritis and Cartilage 24: S167-S168.

F. Topuz, S. Singh, K. Albrecht, M. Moller and J. Groll (2016). “DNA Nanogels To Snare Carcinogens: A Bioinspired Generic Approach with High Efficiency.” Angew Chem Int Ed Engl 55(40): 12210-12213.

M. Veyhl-Wichmann, A. Friedrich, A. Vernaleken, S. Singh, H. Kipp, V. Gorboulev, T. Keller, C. Chintalapati, R. Pipkorn, M. Pastor-Anglada, J. Groll and H. Koepsell (2016). “Phosphorylation of RS1 (RSC1A1) Steers Inhibition of Different Exocytotic Pathways for Glucose Transporter SGLT1 and Nucleoside Transporter CNT1, and an RS1-Derived Peptide Inhibits Glucose Absorption.” Molecular Pharmacology 89(1): 118-132.

E. Vorndran. and P. Lindberg (2016). “In situ-immobilization of two model cyanobacterial strains in ceramic structures: A new biohybrid material for photobioreactor applications.” Journal of Biotechnology 223: 1-5.

A. Weigand, A. M. Boos, K. Tasbihi, J. P. Beier, P. D. Dalton, M. Schrauder, R. E. Horch, M. W. Beckmann, P. L. Strissel and R. Strick (2016). “Selective isolation and characterization of primary cells from normal breast and tumors reveal plasticity of adipose derived stem cells.” Breast Cancer Res 18(1): 32.

L. Wistlich, A. Rücker, M. Schamel, A. C. Kübler, U. Gbureck and J. Groll (2016). “A Bone Glue with Sustained Adhesion under Wet Conditions.” Advanced Healthcare Materials.

J. Groll. Mechanically Strong Microstructured Hydrogels Based on Reactive Star-Shaped Prepolymers. Macromolecular Symposia 2015; 358(1): 148–156

M. Kessler, J. Groll, J. Tessmar. Application of Linear and Branched Poly(Ethylene Glycol)-Poly(Lactide) Block Copolymers for the Preparation of Films and Solution Electrospun Meshes. Macromolecular Bioscience 2015, published online

A. Manchón, M.H. Alkhraisat, C. Rueda-Rodriguez, J.C. Prados-Frutos, J. Torres, J. Lucas-Aparicio, A. Ewald, U. Gbureck, E. López-Cabarcos. A new iron calcium phosphate material to improve the osteoconductive properties of a biodegradable ceramic: a study in rabbit calvaria. Biomedical Materials 2015, 10(5), published online

M. Kuhlmann, J. Groll. Dispersity control of linear poly(glycidyl ether)s by slow monomer addition. RSC Advances 2015; 5: 67323–67326

K. Zorn, E. Vorndran, U. Gbureck, F.A. Müller. Reinforcement of a magnesium-ammonium-phosphate cement with calcium phosphate whiskers. Journal of the American Ceramic Society 2015, published online

M. Kessler, E. Esser, J. Groll, J. Tessmar. Bilateral PLA/alginate membranes for the prevention of postsurgical adhesions. Journal of Biomedical Materials Research Part B: Applied Biomaterials 2015, published online

T. Führmann, M. Ghosh, A. Otero, B. Goss, T.R. Dargaville, D.D. Pearse, P.D. Dalton. Peptide-functionalized polymeric nanoparticles for active targeting of damaged tissue in animals with experimental autoimmune encephalomyelitis. Neuroscience Letters 2015, published online

E. DeSimone, K. Schacht, T. Jüngst, J. Groll, T. Scheibel. Biofabrication of 3D constructs: fabrication technologies and spider silk proteins as bioinks. Pure and Applied Chemistry 2015, published online

G. Hochleitner, T. Jüngst, T.D. Brown, K. Hahn, C. Moseke, F. Jakob, P.D. Dalton, J. Groll. Additive manufacturing of scaffolds with sub-micron filaments via melt electrospinning writing. Biofabrication 2015; 7, published online

T. Jüngst, M.L. Muerza-Cascante, T.D. Brown, M. Standfest, D.W. Hutmacher, J. Groll, P. Dalton. Melt Electrospinning onto Cylinders: Effects of Rotational Velocity and Collector Diameter on the Morphology of Tubular Structures. Polymer International 2015; published online

M.V. Beer, K. Hahn, S. Diederichs, M. Fabry, S. Singh, S.J. Spencer, J. Salber, M. Möller, A.G. Shard, J. Groll. Quantifying ligand-cell interactions and determination of the surface concentrations of ligands on hydrogel films: The measurement challenge. Biointerphases 2015; 10(2), published online

F. Topuz, J. Groll, M. Möller. Covalently layer-by-layer assembled homogeneous nanolayers with switchable wettability. Polymer Chemistry 2015; published online

M. Geffers, J. Groll, U. Gbureck. Reinforcement Strategies for Load-Bearing Calcium Phosphate Biocements. Materials 2015; published online

R. Hennig, K. Pollinger, J. Tessmar, A. Goepferich. Multivalent targeting of AT1 receptors with angiotensin II-functionalized nanoparticles. Journal of Drug Targeting 2015; published online

Z. Sheikh, M. Geffers, T. Christel, J. Barralet, U. Gbureck. Chelate setting of alkali ion substituted calcium phosphates. Ceramics International 2015; published online

J. Visser, F.P.W. Melchels, J.E. Jeon, E.M. van Bussel, L.S. Kimpton, H.M. Byrne, W.J.A. Dhert, P.D. Dalton, D.W. Hutmacher, J.Malda. Reinforcement of hydrogels using three-dimensionally printed microfibres. Nature Communications 2015; 6, published online

T. Simon-Yarza, A. Rossi, K.H. Heffels, F. Prosper, J. Groll, M.J. Blanco-Prieto. Polymeric electrospun scaffolds: Neuregulin Encapsulation and biocompatibility studies in a model of myocardial ischemia. Tissue Engineering Part A 2015; published online

M. Schmitz, M. Kuhlmann, O. Reimann, C.P.R. Hackenberger, J. Groll. Side Chain Cysteine Functionalized Poly(2-oxazoline)s for Multiple Peptide Conjugation by Native Chemical Ligation. Biomacromolecules 2015; published online

E. Vorndran, C. Moseke, U. Gbureck. 3D printing of ceramic implants. MRS Bulletin 2015; 40(2): 127-136

L. Macrí-Pellizzeri, B. Pelacho, A. Sancho, O. Iglesias-García, A.M. Simón-Yarza, M. Soriano-Navarro, S. González-Granero, J.M. García-Verdugo, E.M. De-Juan-Pardo, F. Prosper. Substrate stiffness and composition specifically direct differentiation of induced pluripotent stem cells. Tissue Engineering Part A 2015; 21(9-10): 1633-1641

A. Manchón, M. Alkhraisat, C. Rueda-Rodriguez, J. Torres, J.C. Prados-Frutos, A. Ewald, U. Gbureck, J. Cabrejos-Azama, A. Rodriguez-González, E. López-Cabarcos. Silicon calcium phosphate ceramic as novel biomaterial to simulate the bone regenerative properties of autologous bone. Journal of Biomedical Materials Research Part A 2015; 103(2): 479-488

M. Kuhlmann, O. Reimann, C.P.R. Hackenberger, J. Groll. Cysteine-Functional Polymers via Thiol-ene Conjugation. Macromolecular Rapid Communications 2015; 36(5): 472-476

T. Christel, S. Christ, J.E. Barralet, J. Groll, U. Gbureck. Chelate Bonding Mechanism in a Novel Magnesium Phosphate Bone Cement. Journal of the American Ceramic Society 2015; 98(3): 694-697

K. Schacht, T. Jüngst, M. Schweinlin, A. Ewald, J. Groll, T. Scheibel. Biofabrication of Cell-Loaded 3D Spider Silk Constructs. Angewandte Chemie 2015; 54(9): 2816-2820

M. Castilho, J. Rodrigues, I. Pires, B. Gouveia, M. Pereira, C. Moseke, J. Groll, A. Ewald, E. Vorndran. Fabrication of individual alginate-TCP scaffolds for bone tissue engineering by means of powder printing. Biofabrication 2015; 7, published online

M. Geffers, J.E. Barralet, J. Groll, U. Gbureck. Dual-setting brushite-silica gel cements. Acta Biomaterialia 2015; 11: 467-476

S. Christ, M. Schnabel, E. Vorndran, J. Groll, U. Gbureck. Fiber reinforcement during 3D printing. Materials Letters 2015; 139: 165-168

M.L. Muerza-Cascante, D. Haylock, D.W. Hutmacher, P.D. Dalton. Melt Electrospinning and Its Technologization in Tissue Engineering. Tissue Engineering Part B: Reviews 2015; 21(2): 187-202

T.D. Brown, F. Edin, N. Detta, A.D. Skelton, D.W. Hutmacher, P.D. Dalton. Melt electrospinning of poly(ε-caprolactone) scaffolds: Phenomenological observations associated with collection and direct writing. Materials Science & Engineering C 2014; 45: 698-708

S.N. Rath, A. Brandl, D. Hiller, A. Hoppe, U. Gbureck, R.E. Horch, A.R. Boccaccini, U. Kneser. Bioactive Copper-Doped Glass Scaffolds Can Stimulate Endothelial Cells in Co-Culture in Combination with Mesenchymal Stem Cells. Plos One 2014; published online

P. Schendzielorz, T. Schmitz, C. Moseke, U. Gbureck, K. Frölich, K. Rak, J. Groll, R. Hagen, A. Radeloff. Plasma-Assisted Hydrophilization of Cochlear Implant Electrode Array Surfaces Enables Adhesion of Neurotrophin-Secreting Cells. ORL-Journal for Oto-Rhino-Laryngology Head and Neck Surgery 2014; 76: 257-265

A. Kasten, T. Naser, K. Brüllhoff, J. Fiedler, P. Müller, M. Möller, J. Rychly, J. Groll, R.E. Brenner. Guidance of mesenchymal stem cells on fibronectin structured hydrogel films. Plos One 2014; published online

S. Flauder, U. Gbureck, F.A. Müller. Structure and mechanical properties of β-TCP scaffolds prepared by ice-templating with preset ice front velocities. Acta Biomaterialia 2014; 10(12): 5148-5155

G. Hochleitner, J.F. Hümmer, R. Luxenhofer, J. Groll. High definition fibrous poly(2-ethyl-2-oxazoline) scaffolds through melt electrospinning writing. Polymer 2014; 55(20): 5017-5023

T. Schmitz, F. Warmuth, E. Werner, C. Hertl, J. Groll, U. Gbureck, C. Moseke. Physical and chemical characterization of Ag-doped Ti coatings produced by magnetron sputtering of modular targets. Materials Science and Engineering C 2014; 44: 126-131

M. Hütten, A. Dhanasingh, R. Hessler, T. Stöver, K.H. Esser, M. Möller, T. Lenarz, C. Jolly, J. Groll, V. Scheper. In Vitro and In Vivo Evaluation of a Hydrogel Reservoir as a Continuous Drug Delivery System for Inner Ear Treatment. Plos One 2014; published online

A. Sancho, L. Vázquez, E.M. De-Juan-Pardo. Effect of cold storage on collagen-based hydrogels for the three-dimensional culture of adipose-derived stem cells. Biofabrication 2014; 6(3)

A.M. Greiner, P. Hoffmann, K. Bruellhoff, S. Jungbauer, J.P. Spatz, M. Moeller, R. Kemkemer, J. Groll. Stable Biochemically Micro-patterned Hydrogel Layers Control Specific Cell Adhesion and Allow Long Term Cyclic Tensile Strain Experiments. Macromolecular Bioscience 2014; 14(11):1547-1555

T. Christel, M. Geffers, U. Klammert, B. Nies, A. Höß, J. Groll, A.C. Kübler, U. Gbureck. Fabrication and cytocompatibility of spherical magnesium ammonium phosphate granules. Materials Science & Engineering C 2014; 42:130-136

B. Kanter, M. Geffers, A. Ignatius, Uwe Gbureck. Control of in vivo mineral bone cement degradation. Acta Biomaterialia 2014; 10(7):3279-3267

F. Tamimi, J. Torres, K. Al-Abedalla, E. Lopez-Cabarcos, M.H. Alkhraisat, D.C. Bassett, U. Gbureck, J.E. Barralet. Osseointegration of dental implants in 3D-printed synthetic onlay grafts customized according to bone metabolic activity in recipient site. Biomaterials 2014; 35(21): 5436-5445

V.A. Schulte, K. Hahn, A. Dhanasingh, K.H. Heffels, J. Groll. Hydrogel–fibre composites with independent control over cell adhesion to gel and fibres as an integral approach towards a biomimetic artificial ECM Biofabrication 2014; 6(2)

M. Castilho, M. Dias, E. Vorndran, U. Gbureck, P. Fernandes, I. Pires, B. Gouveia, H. Armés, E. Pires, J. Rodrigues. Application of a 3D printed customized implant for canine cruciate ligament treatment by tibial tuberosity advancement Biofabrication 2014; published online.

C. Hertl, L. Koll, T. Schmitz, E. Werner, U. Gbureck. Structural characterisation of oxygen diffusion hardened alpha-tantalum PVD-coatings on titanium. Materials Science & Engineering C 2014; 41(1):28-35

M.J. Kettel, K. Schäfer, J. Groll, M. Möller. Nanogels with high active ß-cyclodextrin content as physical coating system with sustained release properties. ACS Applied Materials & Interfaces 2014; 6(4): 2300-2311

D. Projahn, S. Simsekyilmaz, S. Singh, I. Kanzler, B.K. Kramp, M. Langer, A. Burlacu, J. Bernhagen, D. Klee, A. Zernecke, T.M. Hackeng, J. Groll, C. Weber, E.A. Liehn, R.R. Koenen. Controlled intramyocardial release of engineered chemokines by biodegradable hydrogels as a treatment approach of myocardial infarction. Journal of Cellular and Molecular Medicine 2014; 18(5): 790-800

P. Fernández-Robredo, A. Sancho, S. Johnen, S. Recalde, N. Gama, G. Thumann, J. Groll, A. García-Layana. Current Treatment Limitations in Age-Related Macular Degeneration and Future Approaches Based on Cell Therapy and Tissue Engineering. Journal of Ophthalmology 2014, published online

K. Stuckensen, A. Ewald, J. Groll, U. Gbureck. In situ formation of multilayer biocomposite with anisotropic crystal orientation. Materials Letters 2014; 120(1): 111-114.

M. Castilho, C. Moseke, A. Ewald, U. Gbureck, J. Groll, I. Pires, J. Tessmar, E. Vorndran. Direct 3D powder printing of biphasic calcium phosphate scaffolds for substitution of complex bone defects. Biofabrication 2014; 6(1), published online

C. Luschmann, J. Tessmar, S. Schoeberl, O. Strau, W. Luschmann, A. Goepferich. Self-Assembling Colloidal System for the Ocular Administration of Cyclosporine A. Cornea 2014; 33(1): 77-81

J. Malda, J. Visser, F.P. Melchels, T. Jüngst, W.E. Hennink, W.J.A. Dhert, J. Groll, D.W. Hutmacher. 25th Anniversary Article: Engineering Hydrogels for Biofabrication. Advanced Materials 2013; 25(36): 5011-5028.

M. Bartneck, K.H. Heffels, M. Bovi, J. Groll, G. Zwadlo-Klarwasser. The role of substrate morphology for the cytokine release profile of immature human primary macrophages. Materials Science and Engineering C 2013; 33(8): 5109-5114.

D. Tanaka, D. Bünger, H. Hildebrandt, M. Möller, J. Groll. Unidirectional Control of Anisotropic Wetting through Surface Modification of PDMS Microstructures. Langmuir 2013; 29(40): 12331–12336.

E. Vorndran, M. Geffers, A. Ewald, M. Lemm, B. Nies, U. Gbureck. Ready-to-use injectable calcium phosphate bone cement paste as drug carrier. Acta Biomaterialia 2013; 9(12):9558–9567.

M. Castilho, M. Dias, U. Gbureck, J. Groll, P. Fernandes, I. Pires, B. Gouveia, J. Rodrigues, E. Vorndran. Fabrication of computationally designed scaffolds by low temperature 3D printing. Biofabrication 2013; 5, published online.

B.M. Holzapfel, J.C. Reichert, J.-T. Schantz, U. Gbureck, L. Rackwitz, U. Nöth, F. Jakob, M. Rudert, J. Groll, D.W. Hutmacher. How smart do biomaterials need to be? A translational science and clinical point of view. Advanced Drug Delivery Reviews 2013; 65(4): 581–603.

N. Mehrban, J. Bowen, E. Vorndran, U. Gbureck, L.M. Grover. Structural changes to resorbable calcium phosphate bioceramic aged in vitro. Colloids and Surfaces B: Biointerfaces 2013; 111: 469-478.

E. Esser, J.K.V. Tessmar. Preparation of well-defined calcium cross-linked alginate films for the prevention of surgical adhesions. Journal of Biomedical Materials Research B 2013; 101B(5): 826–839.

C. Neuerburg, S. Recknagel, J. Fiedler, J. Groll, M. Moeller, K. Bruellhoff, H. Reichel, A. Ignatius, R.E. Brenner. Ultrathin sP(EO-stat-PO) hydrogel coatings are biocompatible and preserve functionality of surface bound growth factors in vivo. Journal of Materials Science: Materials in Medicine 2013; 24(10):2417-2427.

F. Jakob, R. Ebert, A. Ignatius, T. Matsushita, Y. Watanabe, J. Groll, H. Walles. Bone tissue engineering in osteoporosis. Maturitas 2013; 75(2): 118-124.

M. Hoss, T. Saric, B. Denecke, G. Peinkofer, M. Bovi, J. Groll, K. Ko, J. Salber, M. Halbach, H.R. Schoeler, M. Zenke, S. Neuss. Expansion and Differentiation of Germline-Derived Pluripotent Stem Cells on Biomaterials. Tissue Engineering Part A 2013; 19(9-10): 1067-1080.

S. Singh, I. Zilkowski, A. Ewald, T. Maurell-Lopez, K. Albrecht, M. Moeller, J. Groll. Mild Oxidation of Thiofunctional Polymers to Cytocompatible and Stimuli-Sensitive Hydrogels and Nanogels. Macromolecular Bioscience 2013; 13(4): 470-482.

M.V. Beer, C. Rech, P. Gasteier, B. Sauerzapfe, J. Salber, A. Ewald, M. Moeller, L. Elling, J. Groll. The Next Step in Biomimetic Material Design: Poly-LacNAc-Mediated Reversible Exposure of Extra Cellular Matrix Components. Advanced Healthcare Materials 2013; 2(2): 306-311.

L.M. Grover, A.J. Wright, U. Gbureck, A. Bolarinwa, J. Song, Y. Liu, D.F. Farrar, G. Howling, J. Rose, J.E. Barralet. The effect of amorphous pyrophosphate on calcium phosphate cement resorption and bone generation. Biomaterials 2013; 34 : 6631-6637.

L.A. Strobel, N. Hild, D. Mohn, W. J. Stark, A. Hoppe, U. Gbureck, R. E. Horch, U. Kneser, A.R. Boccaccini. Novel strontium-doped bioactive glass nanoparticles enhance proliferation and osteogenic differentiation of human bone marrow stromal cells. J Nanoparticle Res 2013; 15:1780.

S. Wächter, C. Moseke, J. Groll, U. Gbureck. Emulsion synthesis of dicalcium phosphate particles for the preparation of calcium phosphate cements with improved compressive strengths and reduced setting times. Bionanomaterials 2013;14(1-2):81-87.

J. Schnieders, U. Gbureck, O. Germershaus, M. Kratz, D.B. Jones, T. Kissel. Ex vivo human trabecular bone model for biocompatibility evaluation of calcium phosphate composites modified with spray dried biodegradable microspheres. Advanced Healthcare Materials 2013; 2(10):1361-1369.

C. Wolf-Brandstetter, S. Roessler, S. Storch, U. Hempel, U. Gbureck, B. Nies, S. Bierbaum, D. Scharnweber. Physicochemical and cell biological characterization of PMMA bone cements modified with additives to increase bioactivity. J Biomed Mater Res B 2013; 101B: 599–609.

S. Singh, F. Topuz, K. Hahn, K. Albrecht, J. Groll. Einbau aktiver Proteine und lebender Zellen in redoxsensitive Hydrogele und Nanogele durch enzymatische Vernetzung. Angewandte Chemie 2013, 52(10): 3000–3003.

K. Harrass , R. Krüger, M. Möller, K. Albrecht, J. Groll. Mechanically strong hydrogels with reversible behaviour under cyclic compression with MPa loading. Soft Matter 2013; 9(10): 2869-2877

K. Zorn, D. Mitró, E. Vorndran, U. Gbureck, F.A. Müller. Hydrothermal synthesis of calcium-deficient hydroxyapatite whiskers and their thermal transformation to polycrystalline ß-tricalcium phosphate short fibers. Bioinspired, Biomimetic and Nanobiomaterials 2013; 2(1): 11-19

C. Moseke, M. Gelinsky, J. Groll, U. Gbureck. Chemical Characterization of hydroxyapatite obtained by wet chemistry in the presence of V, Co, and Cu ions. Materials Science and Engineering C 2013; 33(3): 1654-1661

C. Moseke, C. Lehmann, T. Schmitz, F. Reinert, J. Groll, U. Gbureck. Nanostructuring of Refractory Metal Surfaces by Electrochemical Oxidation: Nb and the Binary Systems Ti-Ta and Nb-Ta. Current Nanoscience 2013; 9(1): 132-138

T. Schmitz, C. Hertl, E. Werner, U. Gbureck, J. Groll, C. Moseke. Oxygen diffusion hardening of tantalum coatings on cp-titanium for biomedical applications. Surface & Coatings Technology 2013; 216: 46–51

R. Krüger, J.M. Seitz, A.Ewald, F.W. Bach, J. Groll. Strong and Tough Magnesium Wire Reinforced Phosphate Cement Composites for Load-Bearing Bone Replacement. Journal of the Mechanical Behavior of Biomedical Materials 2013; 20:36–44

S. Flauder, U. Gbureck, F.A. Müller. ß-TCP Scaffolds with an Interconnected and Aligned Porosity Fabricated via Ice-Templating. Key Engineering Materials 2013; 529-530: 129-132

F. Tamimi, P. Comeau, D. Le Nihouannen, Y.L. Zhang, D.C. Bassett, S. Khalili, U. Gbureck, S.D. Tran, S. Komarova, J.E. Barralet. Perfluorodecalin and bone regeneration. European Cells and Materials 2013: 25: 22-36

T. Christel, M. Kuhlmann, E. Vorndran, J. Groll, U. Gbureck. Dual setting α-tricalcium phosphate cements. Journal of Materials Science: Materials in Medicine 2013; 24(3): 573-581

D. Buenger, F. Topuz, J. Groll. Hydrogels in sensing applications. Progress in Polymer Science 2012; 37(12): 1678–1719

T. Christel, M. Kuhlmann, E. Vorndran, J. Groll, U. Gbureck. Dual setting α-tricalcium phosphate cements. Journal of Materials Science: Materials in Medicine 2012, published online

M. Bartneck, H.A. Keul, M. Wambach, J. Bornemann, U. Gbureck, N. Chatain, S. Neuss, F. Tacke, J. Groll, G. Zwadlo-Klarwasser. Effects of nanoparticle surface-coupled peptides, functional endgroups, and charge on intracellular distribution and functionality of human primary reticuloendothelial cells. Nanomedicine: Nanotechnology, Biology and Medicine 2012; 8(8): 1282–1292

M. Bartneck, T. Ritz, H.A. Keul, M. Wambach, J. Bornemann, U. Gbureck, J. Ehling, T. Lammers, F. Heymann, N. Gassler, T. Lüdde, C. Trautwein, J. Groll, F. Tacke. Peptide-Functionalized Gold Nanorods Increase Liver Injury in Hepatitis. ACS Nano 2012; 6(10): 8767-8777

T. Luhmann, O. Germershaus, J. Groll, L. Meinel. Bone targeting for the treatment of osteoporosis. Journal Of Controlled Release 2012; 161(2): 198–213

M.J. Kettel, H. Hildebrandt, K. Schaefer, M. Moeller, J. Groll.Tenside-free preparation of nanogels with high functional β‑cyclodextrin content. ACS Nano 2012; 6(9): 8087–8093

C. Moseke, C. Bayer, E. Vorndran, J.E. Barralet, J. Groll, U. Gbureck. Low temperature fabrication of spherical brushite granules by cement paste emulsion. Journal of Materials Science: Materials in Medicine 2012; 23(11): 2631-2637

M. Kuhlmann, S. Singh, J. Groll. Controlled Ring-opening polymerization of substituted Episulfides for side-chain functional polysulfide-based amphiphiles. Macromolecular Rapid Communications 2012; 33(17): 1482−1486

A. Ewald, C. Kaeppel, E. Vorndran, C. Moseke, M. Gelinsky, U. Gbureck. The effect of Cu(II)-loaded brushite scaffolds on growth and activity of osteoblastic cells. Journal of Biomedical Materials Research Part A 2012; 100: 2392–2400

R. Krueger, J. Groll. Fiber reinforced calcium phosphate cements – on the way to degradable load bearing bone substitutes? Biomaterials 2012; 33(25): 5887-5900.

M. Bartneck, K.H. Heffels, Y. Pan, M. Bovi, G. Zwadlo-Klarwasser, J. Groll. Inducing healing-like human primary macrophage phenotypes by 3D hydrogel coated nanofibres, Biomaterials 2012; 33(16):4136-4146.

W. Herzlieb, K.M. Koehler, A. Ewald, N. Hofmann, U. Gbureck. Antimicrobial and physicochemical properties of experimental light curing composites with alkali-substituted calcium phosphate fillers, Dental Materials 2012; 28(6):597-603.

F. Topuz, A. Henke, W. Richtering, J. Groll. Magnesium ions and alginate do form hydrogels: a rheological study, Soft Matter 2012; 8(18): 4877-4881.

F. Rudnitzki, M. Bever, R. Rahmanzadeh, K. Brieger, E. Endl, J. Groll, G. Huttmann. Bleaching of plasmon-resonance absorption of gold nanorods decreases efficiency of cell destruction, Journal of Biomedical Optics 2012; 17(5): 058003.

M.V. Beer, C. Rech, S. Diederichs, K. Hahn, K. Bruellhoff, M. Moeller, L. Elling, J. Groll. A hydrogel-based versatile screening platform for specific biomolecular recognition in a well plate format, Analytical and Bioanalytical Chemistry 2012; 403(2): 517-526.

C. Moseke, F. Hage, E. Vorndran, U. Gbureck. TiO2 nanotube arrays deposited on Ti substrate by anodic oxidation and their potential as a long-term drug delivery system for antimicrobial agents, Applied Surface Science 2012; 258(14): 5399-5404.

F. Jakob, R. Ebert, M. Rudert, U. Noeth, H. Walles, D. Docheva, M. Schieker, L. Meinel, J. Groll. In situ guided tissue regeneration in musculoskeletal diseases and aging Implementing pathology into tailored tissue engineering strategies, Cell and Tissue Research 2012; 347(3): 725-735.

J. Groll, K. Mullen, A. Walther. Macromolekulare Chemie 2011, Nachrichten aus der Chemie 2012; 60(3): 332-345.

J. Geistlinger, W. Du, J. Groll, F. Liu, J. Hoegel, K.J. Foehrl, A. Pasquarelli, M. Schneider: P2RX7 genotype association in severe sepsis identified by a novel multi-individual array for rapid screening and replication of risk SNPs. Clinica Chimica Acta 2012; 413(1-2): 39-47.

A. Dhanasingh, J. Groll: Polysaccharide based covalently linked multi-membrane hydrogels. Soft matter 2012; 8(5): 1643-1647.

J.Y.S. Yoon, H. Deyhle, U. Gbureck, E. Vorndran, F. Beckmann, B. Mueller. Three-dimensional morphology and mechanics of bone scaffolds fabricated by rapid prototyping, International Journal of Materials Research 2012; 103(2): 200-206.

A. Ewald, B. Lochner, U. Gbureck, J. Groll, R. Krüger. Structural optimization of macroporous magnesium phosphate scaffolds and their cytocompatibility, Key Engineering Materials 2012; 493-494: 813-819.

E. Vorndran, N. Spohn, B. Nies, S. Rössler, S. Storch, U. Gbureck: Mechanical properties and drug release behaviour of bioactivated PMMA-cements, Journal of Biomaterials Applications 2012; 26(5): 581-594.

J. Schnieders, U. Gbureck, E. Vorndran, M. Schossig, T. Kissel. The effect of porosity on drug release kinetics from vancomycin microsphere/calcium phosphate cement composites, JBMR B 2011; 99B(2): 391-398.

N. Mehrban, J. Z. Paxton, J. Bowen, A. Bolarinwa, E. Vorndran, U. Gbureck, L. M. Grover. Comparing physicochemical properties of printed and hand cast biocements designed for ligament replacement, Advances in Applied Ceramics 2011, 110: 162-167.

F. Tamini, D. Le Nihouannen, D.C. Bassett, S. Ibasco, U. Gbureck, J.C. Knowles, A.J. Wright, S. Komarova, J.E. Barralet: Biocompatibility of magnesium phosphate minerals and their stability under physiological conditions, Acta Biomaterialia 2011; 7: 2678-2685.

U. Klammert, A. Ignatius, U. Wolfram, T. Reuther, U. Gbureck: In vivo degradation of low temperature calcium and magnesium phosphate ceramics in a heterotopic model, Acta Biomaterialia, 2011; 7: 3469-3475.

Torres J, Tamimi F, Alkhraisat M, Prados-Frutos JC, Rastikerdar E, Gbureck U, Barralet JE, López-Cabarcos E. Vertical bone augmentation with 3D-synthetic monetite blocks in the rabbit calvaria, J Clin Periodont 2011; 38:1147-53.

Tan YN, Patel S, Gbureck U, Grover LM. Controlling degradation in calcium phosphate cements. Adv Appl Ceram 2011; 110: 457-463.

Stuckensen K, Gbureck U. Biphasic layered scaffolds with anisotropic mineralization behavior for osteochondral tissue replacement. Tissue Engineering Part A 2011; 17: 570-571.

Hill PJ, Stritzker J, Scadeng M, Geissinger U, Haddad D, Basse-Lüsebrink TC., Gbureck U, Jakob P, Szalay AA. Magnetic Resonance Imaging of Tumors Colonized with Bacterial Ferritin-Expressing Escherichia coli. PLoS ONE 2011; 6(10): e25409. doi:10.1371/journal.pone.0025409

E. Vorndran, K. Wunder, C. Moseke, I. Biermann, F. A. Müller, K. Zorn, U. Gbureck: Hydraulic setting Mg3(PO4)2 powders for 3D printing technology, Adv Appl Ceram 2011; 110: 476-481.

C. Moseke, U. Gbureck, P. Elter, P. Drechsler, A. Zoll, R. Thull, A. Ewald. Hard implant coatings with antimicrobial properties. Journal of Materials Science: Materials in Medicine, 22(12), 2711-2720 (2011)

A. Ewald, D. Hösel, S. Patel, L.M. Grover, J.E. Barralet, U. Gbureck. Silver-doped calcium phosphate cements with antimicrobial activity. Acta biomaterialia, 7(11), 4064-4070 (2011)

R. Krüger, D. Joklitschke; U. Gbureck; A. Ewald. Development and Cytocompatibility Testing of Trimagnesium Phosphate and Struvite Foams. Tissue Eng A, 17(3-4), 562 (2011)

E. Vorndran, A. Ewald, F.A. Müller, K. Zorn, A. Kufner, U. Gbureck. Formation and properties of magnesium-ammonium-phosphate hexahydrate biocements in the Ca-Mg-PO(4) system. J Mater Sci Mater Med. 22(3), 429-436 (2011)

C. Moseke, V. Saratsis, U. Gbureck, Injectability and mechanical properties of magnesium phosphate cements. Journal of Materials Science: Materials in Medicine, Vol. 22, No. 12, 2011, 2591-2598

J. Groll. Control of nanofibre surface chemistry for biomaterials and tissue engineering. Tissue Eng A, 17(3-4), 545-545 (2011)

Y. Hijikata, S. Horike, D. Tanaka, J. Groll, M. Mizuno, J. Kim, M. Takatade, S. Kitagawa: Differences of crystal structure and dynamics between a soft porous nanocrystal and a bulk crystal. Chem Commun 2011, 47, 7632-7634.

G. Boehm, Y. Ushakova, H.P. Alizai, T. Braunschweig, C. Lente, K.-H. Heffels, J. Groll, U.P. Neumann, K. Junge: Biocompatibility of PLGA / sP(EO-stat-PO)-coated mesh surfaces under constant shearing stress. European Surgical Research 2011, 47, 118-129.

S. Sinn, M. Eichler, L. Müller, D. Bünger, J. Groll, F. K. Gehring, F. Rupp, J. Geis-Gerstorfer, G. Ziemer, H. P. Wendel: NCO-sP(EO-stat-PO) coatings on gold sensors – a QCM study of hemocompatibility. Sensors 2011, 11(5), 5253-5269.

D. Grafahrend, K.-H. Heffels, M.V. Beer, P. Gasteier, M. Moeller, G. Boehm, P.D. Dalton, J. Groll: Degradable polyester scaffolds with controlled surface chemistry combining minimal protein adsorption with specific bioactivation. Nature Materials 2011, 10, 67-73.

R. Luxenhofer, J. Groll: Macromolekulare Chemie 2010. Nachrichten aus der Chemie 2011, 59(3), 324-334.

J. Fiedler, J. Groll, E. Engelhardt, P. Gasteier, C. Dahmen, H. Kessler, M. Moeller, R. E. Brenner: NCO-sP(EO-stat-PO) surface coatings preserve biochemical properties of RGD peptides. International Journal of Molecular Medicine 2011, 27(1), 139-145.

K. Albrecht, M. Moeller, J. Groll: Nano- and microgels through addition reactions of functional oligomers and polymers. Advances in Polymer Science 2011, 234, 65-93.

Ewald A, Helmschrott K, Knebl G, Mehrban N, Grover LM, Gbureck U. Effect of cold-setting calcium- and magnesium phosphate matrices on protein expression in osteoblastic cells. J Biomed Mater Res B Appl Biomater 2011; 96B(2): 326-332.

M. Hamdan Alkhraisat, C. Rueda, F.T. Marino, J. Torres, L. Blanco Jerez, U. Gbureck, E. Lopez Cabarcos: Effect of silica gel on the cohesion, properties and biological performance of brushite cement, Acta Biomaterialia 2010; 6: 257-265.

M. Hamdan Alkhraisat, C. Rueda, J. Cabrejos-Azama, J. Lucas-Aparicio, F. Tamimi Mariño, J. Torres García-Denche, L. Blanco Jerez, U. Gbureck, E. Lopez Cabarcos. Loading and release of doxycycline hyclate from strontium-substituted calcium phosphate cement. Acta Biomaterialia 2010; 6: 1522-1528.

A. Bolarinwa, U. Gbureck, P. Purnell, M. Bold, L. M. Grover: Cement casting of calcium pyrophosphate based bioceramics, Advances in Applied Ceramics 2010.

S. Patel, P.-J. Jiang, U. Gbureck, R. Caley, L. M. Grover: Comparing the efficacy of three bioceramic matrices for the release of vancomycin hydrochloride, J Biomed Mater Res B 2010; 93: 51-58.

U. Klammert, T. Reuther, M. Blank, I. Reske, J.E. Barralet, L.M. Grover, A.C. Kübler, U. Gbureck: Phase composition, mechanical performance and in vitro biocompatibility of hydraulic setting calcium magnesium phosphate cements, Acta Biomaterialia 2010; 6: 1529-1535.

U. Klammert, U. Gbureck, E. Vorndran, J. Rödiger, P. Meyer-Marcotty, A.C. Kübler: 3D powder printed calcium phosphate implants for reconstruction of cranial and maxillofacial defects, J Craniomaxillofac Surg 2010, 38: 565-570.

N.C. Hunt, A.M. Smith, U. Gbureck, R.M. Shelton, L.M. Grover: Encapsulation of fibroblasts causes alginate hydrogel degradation. Acta Biomaterialia 2010; 6: 3649-3656.

C. Hertl, E. Werner, R. Thull, U. Gbureck: Oxygen Diffusion Hardening of cp-Titanium for biomedical applications, Biomedical Materials 2010; 5: 054104.

U. Klammert, E. Vorndran, T. Reuther, F.A. Müller, K. Zorn, U. Gbureck: Low temperature fabrication of magnesium phosphate cement scaffolds by 3D powder printing, J Mater Sci: Mater Med 2010, 21: 2947-2953.

G. Klug, T. Kampf, S. Bloemer, J. Bremicker, C.H. Ziener, A. Heymer, U. Gbureck, E. Rommel, U. Nöth, W.A. Schenk, P.M. Jakob and W.R. Bauer. Intracellular and extracellular T1 and T2 relaxivities of magneto-optical nanoparticles at experimental high fields. Magnetic Resonance in Medicine 2010; 64; 1607-1615.

Grossardt C, Ewald A, Grover LM, Barralet JE, Gbureck U. Passive and active in vitro resorption of calcium and magnesium phosphate cements by osteoclastic cells. Tissue Eng Part A. 16(12):3687-95 (2010)

Vorndran E; Klammert, U; Ewald A, Barralet JE, Gbureck U. Simultaneous Immobilization of Bioactives During 3D Powder Printing of Bioceramic Drug-Release Matrices. Adv. Funct. Mat. 20(10):1585-1591 (2010).

C. Moseke, U. Gbureck, Tetracalcium phosphate: Synthesis, properties and biomedical applications, Acta Biomaterialia 2010; 6(10): 3815

A. Kasten, P. Müller, U. Bulnheim, J. Groll, K. Bruellhoff, U. Beck, G. Steinhoff, M. Möller, J. Rychly: Mechanical integrin stress and magnetic forces induce biological responses in mesenchymal stem cells which depend on environmental factors. Journal of Cellular Biochemistry 2010; 111(6): 1586-1597.

K. Bruellhoff, J. Fiedler, M. Moeller, J. Groll, R. E. Brenner: Surface coating strategies to prevent biofilm formation on implant surfaces. International Journal of Artificial Organs 2010, 33(9), 646-653.

J. Groll, M. Moeller: Star Polymer Surface Passivation for Single Molecule Detection. Methods in Enzymology 2010, 472, 1-18.

K. Klinkhammer, J. Bockelmann, C. Simitzis, G. A. Brook, D. Grafahrend, J. Groll, M. Möller, J. Mey, D. Klee: Functionalization of electrospun fibers of poly(ε-caprolactone) with star shaped NCO-poly(ethylene glycol)-stat-poly(propylene glycol) for neuronal cell guidance. J Mater Sci Mater Med. 2010, 21(9), 2637-2651.

M. Bartneck, H. A. Keul, S. Singh, K. Czaja, J. Bornemann, M. Bockstaller, M. Möller, G. Zwadlo-Klarwasser and J. Groll: Rapid uptake of gold nanorods by primary human blood phagocytes and immunomodulatory effects of surface chemistry. ACS Nano 2010, 4 (6), 3073-3086.

D. Grafahrend, K.-H. Heffels, M. Möller, D. Klee, J. Groll: Electrospun, Biofunctionalized Fibers as Tailored in vitro Substrates for Keratinocyte Cell Culture. Macromolecular Bioscience 2010, 10(9), 1022-1027.

K. Gavenis, U. Schneider, J. Groll, B. Schmidt-Rohlfing: BMP-7-loaded PGLA microspheres as a new delivery system for the cultivation of human chondrocytes in a collagen type I gel: the common nude mouse model. International Journal of Artificial Organs 2010, 33(1), 45-53.

D. Tanaka, A. Henke, K. Albrecht, M. Moeller, K. Nakagawa, S. Kitagawa, J. Groll: Rapid Preparation of Flexible Porous Coordination Polymer Nanocrystals with Accelerated Guest Adsorption Kinetics. Nature Chemistry 2010, 2, 410-416.

M. Bartneck, H. A. Keul, G. Zwadlo-Klarwasser, J. Groll: Phagocytosis Independent Extracellular Nanoparticle Clearance by Human Immune Cells. NanoLetters 2010, 10, 59-63.

A. Dhanasingh, J. Salber, M. Moeller, J. Groll: Hydrophilic Prepolymer Cross-Linkers for Tailored Hyaluronic Acid Hydrogels. Soft Matter 2010, 6, 618-629.

W. Ahmed, T. Wolfram, A. Goldyn, K. Bruellhoff, B. A. Rioja, M. Möller, J. P. Spatz, T. A. Saifa, J. Groll, R. Kemkemer: Myoblast morphology and organization on biochemically micropatterned hydrogel coatings under cyclic mechanical strain. Biomaterials 2010, 31(2), 250-258.

U. Klammert, T. Reuther, C. Jahn, A.C. Kübler, U. Gbureck: Biocompatibility of brushite and monetite cell culture scaffolds made by 3D powder printing, Acta Biomaterialia 2009; 5: 727-734.

M. Hofmann, A.R. Mohammed, Y. Perrie, U. Gbureck, J.E. Barralet. High strength resorbable brushite bone cement with controlled drug releasing capabilities, Acta Biomaterialia 2009; 5: 43-49.

Y. Liu, J. E. Barralet, U. Gbureck, R. Shelton: Influence of Calcium Phosphate Crystal Morphology on the Adhesion, Spreading and Growth of Bone Derived Cells, JBMR Part A 2009, 90A: 972-980.

J.E. Barralet, U. Gbureck, P. Habibovic, E. Vorndran, C. Gerard, C.J Doillon: Angiogenesis in calcium phosphate scaffolds by inorganic copper release, Tissue Engineering 2009; 15: 1601-1609.

Klammert U, Böhm H, Schweitzer T, Würzler K, Gbureck U, Reuther J, Kübler A. multi-directional Le Fort III midfacial distraction using an individual prefabricated device, J Craniomaxillofac Surg 2009, 37:210-215.

M. Hamdan Alkhraisat, C. Rueda, F.T. Marino, J. Torres, L. Blanco Jerez, U. Gbureck, E. Lopez Cabarcos: The effect of hyaluronic acid on brushite cement cohesion, Acta Biomaterialia 2009, 5:3150-3156.

C. Stötzel, F.A. Müller, J.E. Barralet, F. Reinert, F. Niederdraenk, U. Gbureck: Ion adsorption behaviour of hydroxyapatite powders with different crystallinities, Colloids and Surfaces B: Biointerfaces 2009, 74: 91-95.

F. Tamimi, J. Torres, U. Gbureck, E. Lopez- Cabarcos, D.C. Basset, M. Hamdan Alkhreisat, J.E. Barralet: Craniofacial vertical bone augmentation capacity of 3D printed monolithic CaHPO4 blocks compared to autologous onlay grafts, Biomaterials 2009; 30: 6318-6326.

Ewald A, Ihde S. Salt impregnation of implant materials. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 107(6):790-52009 (2009).

Elter P, Sickel F, Ewald A.Nanoscaled periodic surface structures of medical stainless steel and their effect on osteoblast cells. Acta Biomater.5(5):1468-73 (2009)

Moseke C; Braun W; Ewald A. Electrochemically Deposited Ca(OH)2 Coatings as a Bactericidal and Osteointegrative Modification of Ti Implants. Adv. Eng. Mat. 11(3): B1-B6 (2009)

Vollmar F, Hacker C, Zahedi RP, Sickmann A, Ewald A, Scheer U, Dabauvalle MC. Assembly of nuclear pore complexes mediated by major vault protein. J Cell Sci. 122(Pt 6):780-6 (2009).

Moseke C; Ewald A.: Cell and protein adsorption studies using quartz crystal microgravimetry with dissipation monitoring. Materialwissenschaft und Werkstofftechnik, , 40 (1-2): 36-42 (2009)

J. Groll, J. Fiedler, K. Bruellhoff, M. Moeller, R. E. Brenner: Novel surface coatings modulating eukaryotic cell adhesion and preventing implant infection. International Journal of Artificial Organs 2009; 32, 655-662.

J. Groll, S. Singh, K. Albrecht, M. Moeller: Biocompatible and Degradable Nanogels via Oxidation Reactions of Synthetic Thiomers in Inverse Miniemulsion. Journal of Polymer Science Part A: Polymer Chemistry 2009; 47(20): 5543-5549.

Ince A, Schutze N, Hendrich C, Thull R, Eulert J, Lohr JF. In vitro investigation of orthopedic titanium-coated and brushite-coated surfaces using human osteoblasts in the presence of gentamycin. J Arthoplasty 2008; 23: 762-771.

Casu MB, Braun W, Bauchspiess KR, Kera S, Megner B, Heske C, Thull R, Umbach E. A multi-technique investigation of TiO2 films prepared by magnetron sputtering. Surf Sci 2008; 602: 1599-1606.

M. Bohner, U. Gbureck: Thermal reactions of brushite cements, J Biomed Mater Res Part B 2008, 84B: 375-385.

P. Habibovic, U. Gbureck, C.J. Doillon, D.C. Bassett, C.A. van Blitterswijk, J.E. Barralet: Osteoconduction and osteoinduction of low temperature 3D printed ceramic implants, Biomaterials, 2008; 29: 944-953.

S. Mahmood, W.M. Palin, U. Gbureck, O. Addison, M.P. Hofmann: Effect of mechanical mixing and powder to liquid ratio on the strength and reliability of a brushite bone cement, Key Engin. Mater. 2008; 361-363: 307-310.

L.M. Grover, S. Patel, Y. Hu, U. Gbureck, J.E. Barralet: Modifying brushite cement degradation using calcium alginate beads, Key. Engin. Mater. 2008; 361-363: 311-314.

P.J. Jiang, S. Patel, U. Gbureck, L.M. Grover: A comparison of the efficacy of hydroxyapatite based cements and gels as drug delivery matrices, Key. Engin. Mater. 2008; 361-363: 327-330.

A. Heymer, D. Haddad, M. Weber, U. Gbureck, P. Jakob, U. Nöth. Iron oxide labelling of human mesenchymal stem cells in collagen hydrogels for articular cartilage repair, Biomaterials 2008; 29: 1473-1483.

A.M. Young, P.Y. J. Ng, U. Gbureck, S.N. Nazhat, J.E. Barralet, M.P. Hofmann: Characterization of chlorhexidine-releasing, fast-setting, brushite bone cements, Acta Biomaterialia 2008; 4(4): 1081-1088.

U. Gbureck, T. Hölzel, I. Biermann, J.E. Barralet, L.M. Grover: Preparation of TCP / calcium pyrophosphate structures via rapid prototyping, J. Mater. Sci.: Mater. Med. 2008; 19. 1559-1563.

U. Gbureck, E. Vorndran, J.E. Barralet: Modeling vancomycin release kinetics from porous calcium phosphate ceramics comparing static and dynamic immersion conditions, Acta Biomaterialia 2008; 4: 1480-1486.

C.E. Pedraza, D.C. Bassett, M.D. McKee, V. Nelea, U. Gbureck, J.E. Barralet: The importance of particle size and DNA condensation salt for calcium phosphate nanoparticle transfection. Biomaterials 2008; 29: 3384-3392.

F. Tamimi, B. Kumarasami, C. Doillon, U. Gbureck, D. Le Nihouannen, E. Lopez Cabarcos, J. E. Barralet: Brushite-collagen composites for bone regeneration, Acta Biomaterialia 2008; 4: 1315-1321.

D. Le Nihouannen, S. A. Hacking, U. Gbureck, S. V. Komarova, J. E. Barralet: The use of RANKL-coated brushite cement to stimulate bone remodelling, Biomaterials, 2008; 29: 3253-3259

D. Tebbe, U. Gbureck, R. Thull: Modifikation von Titanoberflächen zur kovalenten Anbindung von Amino-funktionalisierten Silanspacern; BIOmaterialien 2008.

L.M. Grover, M.P. Hofmann, U. Gbureck, B. Kumarasami, J.E. Barralet: Frozen delivery of brushite calcium phosphate cement, Acta Biomaterialia 2008, 4: 1916-1923.

M. Hamdan Alkhraisat, C. Moseke, L. Blanco, E. Lopez-Carbacos, J. E. Barralet, U. Gbureck: Strontium modified biocements with zero order release kinetics, Biomaterials 2008; 29: 4691-4697.

D. Le Nihouannen, S. V. Komarova, U Gbureck, J E Barralet, Bioactivity of bone resorptive factor loaded on osteoconductive matrices: stability post-dehydration. European Journal of Pharmaceutics and Biopharmaceutics 2008 70: 813-818.

E. Vorndran, M. Klarner, U. Klammert, L.M. Grover, S. Patel, J.E. Barralet, U. Gbureck: 3D Powder Printing of β-Tricalcium Phosphate Ceramics using different Strategies, Advanced Biomaterials 2008; 10: B67-B71.

Nebe JB, Müller L, Lüthen F, Ewald A, Bergemann C, Conforto E, Müller FA. Osteoblast response to biomimetically altered titanium surfaces. Acta Biomaterialia, 4(9) 1985-1995 (2008)

Dembski S, Graf C, Krüger T, Gbureck U, Ewald A, Bock A, Rühl E.: Photoactivation of CdSe/ZnS quantum dots embedded in silica colloids. Small. 4(9):1516-26 (2008).

A. Reska, P. Gasteier, K. Albrecht, P. Schulte, A. Offenhäusser, M. Moeller, J. Groll: Ultrathin coatings with reactivity change by time enable functional in vitro networks of insect neurons. Advanced Materials 2008, 20, 2751-2755.

P. D. Dalton, C. Hostert, K. Albrecht, M. Moeller, J. Groll*: Structure and Properties of Urea Crosslinked Star Poly(ethylene oxide-stat-propylene oxide) Hydrogels. Macromolecular Bioscience 2008, 8, 923-931.

P. D. Dalton, N. Joergensen, J. Groll, M. Moeller: Patterned Melt Electrospun Substrates for Tissue Engineering. Biomedical Materials 2008, 3, 034109 (11pp).

K. Albrecht, A. Mourran, X. Zhu, T. Markkula, J. Groll, U. Beginn, W. H. de Jeu, M. Moeller: Thin Film Morphologies of Block Copolymers Complexed with Wedge-Shaped Liquid Crystalline Amphiphilic Molecules. Macromolecules 2008, 41(5), 1728-1738.

J. Hoffmann, A. Paul, M. Harwardt, J. Groll, T. Reeswinkel, D. Klee, M. Moeller, H. Fischer, T. Walker, G. Ziemer, H. P. Wendel: Immobilized DNA Aptamers Used as Potent Attractors for Porcine Endothelial Precursor Cells. J. Biomed. Mater. Res. Part A 2008, 84A, 614-621.

U. Gbureck, T. Hölzel, C. Doillon, F. A. Müller, J.E. Barralet: Direct printing of bioceramic implants with spatially localised angiogenic factors. Adv. Mater. 2007, 19: 795-800.

M.P. Hofmann, U. Gbureck, C.O. Duncan, M.S. Dover, J.E. Barralet: Carvable calcium phosphate bone substitute material, J Biomed Mater Res Part B, 2007; 83B: 1-8.

U. Gbureck, O. Knappe, N. Hoffmann, J. E. Barralet: Antimicrobial Properties of Nanocrystalline Tetracalcium Phosphate Cements, J Biomed Mater Res Part B, 2007; 83B: 132-137.

K.J. Lilley, U. Gbureck, A.J. Wright, J.C. Knowles, D.F. Farrar, J.E. Barralet: Brushite cements from polyphosphoric acid, calcium phosphate systems, J Am Ceram Soc 2007, 90(6): 1892-1898.

D. Tebbe, R. Thull, U. Gbureck: Correlation between heparin release and polymerization degree of organically modified silica ceramics from 3-methacryloxypropylpolysilsesquioxane, Acta Biomaterialia 2007; 3: 829-837.

D. Tebbe, R. Thull, U. Gbureck: Influence of spacer length on heparin coupling efficiency and fibrinogen adsorption of modified titanium surfaces, Biomedical Engineering online, 2007; 6: 31.

U. Gbureck, E. Vorndran, F.A. Müller, J.E. Barralet: Low temperature direct 3D printed bioceramics and biocomposites as drug release matrices, J Controlled Release 2007; 122: 173-180.

U. Gbureck, T. Hölzel, U. Klammert, K. Würzeler, F.A. Müller, J.E. Barralet: Resorbable dicalcium phosphate bone substitutes made by 3D powder printing, Advanced Functional Materials 2007, 17: 3940-3945.

F.A. Müller, U. Gbureck, T. Kasuga, Y. Mizutani, J.E. Barralet, U. Lohbauer. Whisker reinforced calcium phosphate cements, J Am Ceram Soc 2007; 90(11): 3694-3697.

J. Salber, S. Gräter, M. Harwardt, M. Hofmann, D. Klee, J. Dujic, H. Jinghuan, J. Ding, S. Kippenberger, A. Bernd, J. Groll, J. P. Spatz, M. Möller: Influence of Different ECM Mimetic Peptide Sequences Embedded in a Nonfouling Environment on the Specific Adhesion of Human Skin Keratinocytes and Fibroblasts on Deformable Substrates. Small 2007, 3(6), 1023-1031.

P. Gasteier, A. Reska, P. Schulte, J. Salber, A. Offenhäusser, M. Moeller, J. Groll: Surface grafting of PEO-based star shaped molecules for bioanalytical and biomedical applications. Macromolecular Bioscience 2007, 7, 1010-1023.

J. Groll, H. Rong, P. Greiwe, M. Flach: Star performers: six-armed prepolymers for biosensing coatings. European Coating Journal 2007, 5, 162-167.

M. C. Lensen, P. Mela, A. Mourran, J. Groll, J. Heuts, H. Rong, M. Möller: Micro- and Nanopatterned Star Poly(ethylene glycol) (PEG) Materials Prepared by UV-Based Imprint Lithography. Langmuir 2007, 23(14), 7841-7846.

C.D. Heyes, J. Groll, M. Möller, G.U. Nienhaus: Synthesis, patterning and applications of star shaped poly (ethylene glycol) biofunctionalized surfaces. Molecular Biosystems 2007, 6, 419-430.

A. Offenhäusser, S. Böcker-Meffert, T. Decker, R. Helpenstein, P. Gasteier, J. Groll, M. Möller, A. Reska, S. Schäfer, P. Schulte, A. Vogt: Microcontact Printing of Proteins for Neuronal Cell Guidance. Soft Matter 2007, 3, 290-298.

Eisenbarth E, Velten D, Muller M, Thull R, Breme J. Nanostructured niobium oxide coatings influence osteoblast adhesion. J Biomed Mater Res 2006; 79: 166-175.

L.M. Grover, U. Gbureck, M.J. Tremayne, J.E. Barralet: Biologically mediated resorption of brushite cement in vitro, Biomaterials 2006, 27: 2178-2185.

M.P. Hofmann, A.M. Young, S.N. Nazhat, U. Gbureck, J.E. Barralet: Setting Kinetics Observation of a Brushite Cement by FTIR and DSC, Key Engineering Materials 2006; 309-311: 837-830.

N.J.S. Gorst, U. Gbureck, Y. Perrie, A.L. Hutton, M.P. Hofmann, L.M. Grover, J.E., Barralet: Effect of fiber reinforcement on the mechanical properties of brushite cement, Acta Biomaterialia 2006; 2: 95-102.

R. M. Shelton, Y. Liu, P.R. Cooper, U. Gbureck, M. J. German, J. E. Barralet: Bone marrow cell gene expression and tissue construct assembly using octacalcium phosphate microscaffolds, Biomaterials 2006; 17: 2874-2881.

L.M. Grover, U. Gbureck, D.F. Farrar and J.E. Barralet: Adhesion of a novel calcium phosphate cement to cortical bone and several common biomaterials. Key Engin Mater 2006; 309-311: 849-852.

K. J. Lilley, U. Gbureck, A.J. Wright, D. Farrar, J.E. Barralet: Investigation into carboxylic acids as cement reactants, Key Engineering Materials 2006; 309-311: 853-856.

M. Bohner, A. Malsy, C.L. Camiree, U. Gbureck: Combining particle size distribution and isothermal calorimetry data to determine the reaction kinetics of α-Tricalcium phosphate – water mixtures, Acta Biomaterialia 2006; 2(3): 343-348.

J. Schnieders, U. Gbureck, R. Thull, T. Kissel: Controlled release of gentamicin from calcium phosphate – poly(lactic acid-co-glycolic acid) composite bone cement, Biomaterials 2006, 27: 4239-4249.

Z. Xia, L. M.l Grover, Y. Huang, I. Adamopoulos, U. Gbureck, J. T. Triffit, R. M. Shelton, J. E. Barralet: In vitro Biodegradation of Three Brushite Calcium Phosphate Cements by a Macrophage Cell-line, Biomaterials 2006, 27: 4557-4565.

M.P. Hofmann, A.M. Young, U. Gbureck, S.N. Nazhat, J.E. Barralet: FTIR-monitoring of a fast setting brushite bone cement: Effect of intermediate phases, J Mater Chem, 2006; 16: 3199.

M.P. Hofmann, S.N. Nazhat, U. Gbureck, J.E. Barralet: Real time monitoring of the setting reaction of brushite cement: Effect of citric acid, J Biomed Mater Res, 2006, 79B(2): 360-364.

U. Gbureck, T. Hölzel, R. Thull, F.A. Muller, J.E. Barralet. Preparation of nanocrystalline hydroxyapatite scaffolds by 3D powder printing. Cytotherapy 2006; 8: 14-14 046 Suppl. 2.

U. Gbureck, P. Rösch, R. Thull: Einfluss von Aminosäuren auf die physikalischen und chemischen Eigenschaften von Calcium-Phosphat-Zementen, BIOmaterialien 2006; 7(4): 271-277.

Ewald, A., Hauck F. K., Thull, R.: Zellbiologische Untersuchungen des Werkstoffes Gold zur Anwendung als Implantatmaterial im Mittelohr. Biomaterialien, 7 (2), 67-73 (2006).

Ewald, A., Glückermann S.K., Thull R., Gbureck U.: Antimicrobial titanium/silver PVD coatings on titanium. BioMedical Engineering Online, 5, 22 (2006).

J. Hoffmann, J. Groll, J. Heuts, H. Rong, D. Klee, G. Ziemer, M. Moeller, H. P. Wendel: Blood Cell and Plasma Protein Repellent Properties of Star PEG Modified Surfaces. J. Biomat. Sci. – Polymer Edition 2006, 17(9), 985-996.

M. Möller, J. Groll: Kontrolle der Wechselwirkungen von Flächen mit der Biosphäre. Labor&More 2006, 3(4), 32-37.

Braun W, Walter U, Holbein R, Thull R. Electrochemical properties of biocompatible metal modifications on titanium and steel under mechanical loads. Biomed Tech 2005; 50: 100-106.

Endruweit A, Fritzsche S, Thull R, Haase A, Baur W.High-performance composites for applications in medical engineering: Susceptibility artifacts in magnetic resonance imaging. J Reinforc Plast Comp 2005; 24: 131-146.

M.P. Hofmann, U. Gbureck, L.M. Grover, J.E. Barralet: Stearate salts as brushite bone cement setting retardants, Key Eng. Mater. 2005; 284-286, 19-22.

L.M. Grover, U. Gbureck, D. Farrar, J.E. Barralet: The Mechanical Properties and Microstructures of Cement Formed from Pyrophosphoric and Orthophosphoric Acids, Key Eng. Mater. 2005; 284-286, 125-128.

C.L. Camire, U. Gbureck, W. Hirsiger, M. Bohner: Correlating crystallinity and reactivity in an α-tricalcium phosphate cement, Biomaterials, 2005; 26: 2787-2794.

U. Gbureck, S. Dembski, R. Thull, J.E. Barralet: Factors influencing Calcium Phosphate Cement Shelf-Life, Biomaterials, 2005; 26: 3691-3697.

J.E. Barralet, M.J. Tremayne, K.J. Lilley, U. Gbureck: Chemical modification of calcium phosphate cements with α-hydroxy acids and their salts, Chem. Mater., 2005; 17: 1313-1319.

U. Gbureck, R. Thull, J.E. Barralet: Alkali ion substituted calcium phosphate cement formation from mechanically activated reactants, J. Mater Sci.: Mater. Med. 2005; 16: 423-427.

K.J. Lilley, U. Gbureck, J.C. Knowles, D.F. Farrar, J.E. Barralet: Cement from Magnesium Substituted Hydroxyapatite, J. Mater. Sci.: Mater. Med., 2005; 16: 455-460.

U. Gbureck, K. Spatz, R. Thull, J.E. Barralet: Rheological enhancement of mechanically activated α-tricalcium phosphate cements, J. Biomed. Mater. Res. (Appl. Biomat.), 2005; 73B: 1-6.

J.E. Barralet, D.C. Bassett, C.O. Duncan, H. Nishikawa, S. Dover, A. Monaghan, U. Gbureck: Bone screw fixation in ionically modified apatite cement; J. Biomed. Mater. Res. 2005; 73B: 238-243.

U. Gbureck, M. Hofmann, J.E. Barralet: Thermal performance of mechanically activated tetracalcium phosphate, J. Am. Ceram. Soc., 2005; 88(5): 1327-1330.

M. Bohner, U. Gbureck, J.E. Barralet: Technological issues for the developement of more efficient calcium phosphate bone cements: A critical assessment, Biomaterials 2005; 26; 6423-6429.

R. Müller, J. Abke, F. Macionczyk, U. Gbureck, Z. Ruszczak, R. Mehrl, R. Kujat, C. Englert, H. Faltermeier, M. Nehrlich, P. Angele: Surface Engineering of stainless steel materials by tantalum and collagen immobilisation to enhance the biological performance, Biomaterials 2005; 26: 6962-6972.

U. Gbureck, O. Knappe, L.M. Grover, J.E. Barralet: Antimicrobial potency of alkali ion substituted Calcium Phosphate Cements, Biomaterials 2005; 26: 6880-6886.

K.J. Lilley, U. Gbureck, A.J. Wright, D.F. Farrar, J.E. Barralet: Cement from nanocrystalline Hydroxyapatite: Effect of Calcium Phosphate Ratio; J Mater Sci: Mater Med 2005; 16: 1185-1190.

L.M. Grover, U. Gbureck, A.J. Wright, J.E. Barralet: Cement formulations in the calcium phosphate – H2O – H3PO4 – H4P2O7 system, J. Am. Ceram. Soc. 2005; 88(11): 3096-3103.

U. Gbureck, S. Grübel, R. Thull, J.E. Barralet: Modified PMMA-cements for a hydrolysis resistant metal-polymer interface in orthopaedic applications, Acta Biomaterialia 2005; 1: 671-676.

L.M. Grover, A. Young, U. Gbureck, A.J. Wright, J.E. Barralet: Temperature dependant setting kinetics and mechanical properties of β-tricalcium phosphate – pyrophosphoric acid cement, J. Mater. Chem. 2005, 15, 4955 – 4962.

U.Gbureck, R. Thull: Mechanische und rheologische Eigenschaften mineralischer Knochenzemente; BIOmaterialien 2005; 6(4): 287-296.

Ewald A., Hauck A., Schwager K., Helms J., Thull R.: Oberflächenabhängige in-vitro Analyse primärer Patientenosteoblasten. Biomaterialien in der Hals-, Nasen-, Ohren-Heilkunde. Biomaterialien (6 S1), 22-23 (2005).

J. Groll, K. Albrecht, P. Gasteier, S. Riethmüller, U. Ziener, M. Möller: Nanostructured Ordering of Fluorescent Markers and Single Proteins on Substrates. ChemBioChem 2005, 6, 1782-1787.

T. Ameringer, M. Hinz, C. Mourran, H. Seliger, J. Groll*, M. Moeller: Ultrathin Functional Star PEG Coatings for DNA Microarrays. Biomacromolecules 2005, 6, 1819-1823.

J. Groll, J. Fiedler, E. Engelhard, T. Ameringer, S. Tugulu, H.-A. Klok, R.E. Brenner, M. Möller: A Novel Star PEG derived Surface Coating for Specific Cell Adhesion. J. Biomed. Mater. Res. Part A 2005, 74A, 607-617.

J. Groll, Z. Ademovic, T. Ameringer, D. Klee, M. Möller: A Comparison of Coatings from Reactive Star Shaped PEG-stat-PPG Prepolymers and Linear PEG for Biological and Medical Applications. Biomacromolecules 2005, 6, 956-962.

J. Groll, W. Haubensak, T. Ameringer, M. Möller: Ultrathin Coatings from Isocyanate Terminated Star PEG Prepolymers: Patterning of Proteins on the Layers. Langmuir 2005, 21, 3076-3083.

J. Groll, T. Ameringer, J.P. Spatz, M. Möller: Ultrathin Coatings from Isocyanate Terminated Star PEG Prepolymers: Layer Formation and Characterization. Langmuir 2005, 21, 1991-1999.

Strehle MA, Rosch P, Petry R, Hauck A, Thull R, Kiefer W, Popp J.A Raman spectroscopic study of the adsorption of fibronectin and fibrinogen on titanium dioxide nanoparticles. Phys Chem Chem Phys 2004; 6: 5232-5236.

Eisenbarth E, Velten D, Muller M, Thull R, Breme J.Biocompatibility of beta-stabilizing elements of titanium alloys. Biomaterials 2004; 25: 5705-5713.

U. Gbureck, J. E. Barralet, L. M. Grover, K. Spatz, R. Thull: Ionic Modification of Calcium Phosphate Cement Viscosity Part I: Hypodermic injection and strength improvement of apatite cements; Biomaterials, 2004; 25(11): 2187-2195.

J. E. Barralet, L.M. Grover, U. Gbureck: Ionic Modification of Calcium Phosphate Cement Viscosity Part II: Hypodermic Injection and Strength Improvement of Brushite Cements, Biomaterials, 2004; 25(11): 2197-2203.

U. Gbureck, M. Hofmann, J.E. Barralet, L. Grover, R. Thull: Thermodynamic study of formation of amorphous β-tricalcium phosphate for calcium phosphate cements; Key Engin. Mater. 2004; 254-256: 249-252.

J.E. Barralet, U. Gbureck, L. M. Grover, R. Thull: Mechanically induced phase transformation of α- and β-Tricalcium Phosphate; Key Engin. Mater. 2004; 254-256: 277-280.

L. M. Grover, U. Gbureck, J.E. Barralet: Low Porosity CaPO4 x 2H2O cements, Key Engin. Mater. 2004; 254-256: 205-208.

K. J. Lilley, U. Gbureck, J. E. Barralet: Cements from Biphasic β-Tricalcium phosphate, Key Engin. Mater. 2004; 254-256: 281-284.

U. Gbureck, J. E. Barralet, M. Hofmann, R. Thull: Mechanical Activation of Tetracalcium Phosphate, J. Am. Ceram. Soc., 2004; 87(2): 311-313.

J.E. Barralet, K. J. Lilley, D.F. Farrar, C. Ansell, U. Gbureck: Cements from nanocrystalline Hydroxyapatite, J. Mater. Sci.: Mater. Med., 2004; 15: 405-409.

U. Gbureck, J. E. Barralet, M. Hofmann, R. Thull: Nanocrystalline Tetracalcium Phosphate Cement, J. Dent. Res. 2004; 83(5): 425-428.

U. Gbureck, J. E. Barralet, L. Radu, H. G. Klinger, R. Thull: Amorphous α-tricalcium phosphate: preparation and aqueous setting reaction; J. Am. Ceram. Soc. 2004, 87(6): 1126-1132.

U. Gbureck, L. Lansnicker, T. Holste, R. Thull: Vergleichende Untersuchungen zur Eignung eines neuen Oberflächenkonditionierungs-Verfahrens (Airsonic Miniblaster) in der Klebebrückentechnik, Biomed. Technik 2004; 49: 11-17.

S. Winter, F. Aubertin, U. Gbureck, U. T. Seyfert, R. Thull, J. Breme: Untersuchung des Benetzungsverhaltens von oberflächenmodifizierten Ti-Werkstoffen im Hinblick auf eine verbesserte Hämokompatibilität; BIOmaterialien 2004; 5(2): 48-52.

U. Gbureck, R. Thull, Tribochemische TiO2-Beschichtungen auf Dental-legierungen, Dental Praxis 2004; 3/4: 89-94.

U. Gbureck, S. Dembski, R. Thull, J.E. Barralet: Bruschit-Knochenzemente aus biphasigen β-Tricalciumphosphat / Calciumpyrophosphat Keramiken, BIOmaterialien, 2004; 5(4): 255-260.

Ewald, A., Thull, R.: Proteinexpressionsmuster von adhärierenden Zellen an oberflächenmodifiziertem Titan in Zahnimplantaten. Biomaterialien (5 S1), 20-21 (2004).

Reichart B, Klafke R, Dreger C, Kruger E, Motsch I, Ewald A, Schafer J, Reichmann H, Muller CR, Dabauvalle MC.: Expression and localization of nuclear proteins in autosomal-dominant Emery-Dreifuss muscular dystrophy with LMNA R377H mutation. BMC Cell Biol. 5:12. (2004)

E.V. Amirgoulova, J. Groll, C.D. Heyes, T. Ameringer, C. Röcker, Martin Möller, G.U. Nienhaus: Biofunctionalized polymer surfaces exhibiting minimal interaction towards immobilized proteins. ChemPhysChem 2004, 5, 552-555.

J. Groll, E. Amirgoulova, T. Ameringer, C.D. Heyes, C. Röcker, G.U. Nienhaus, M. Möller: Biofunctionalized, Ultrathin Coatings of Crosslinked Star-shaped Poly(ethylene oxide) allow reversible folding of immobilized proteins. J. Am. Chem. Soc. 2004, 126, 4234.

A. Gbureck, U. Gbureck, W. Kiefer, U. Posset, R. Thull: FT-Raman Spectroscopic Investigations of Titanium Alkoxides with Polymerizable Organic Ligands, Applied Spectroscopy, 54 (3), 2000, 390.

K. Stuckensen, U. Gbureck, J. Groll: Production of materials having an anisotropic structure. WO2013083844A2

C. Jolly, R. Hessler, A. Dhanasingh, J. Groll: Hydrogel-filled drug delivery reservoirs. WO2010054308A1.

M. Moeller, J. Groll, M. Eberhardt: Novel biosensor system based on recognition induced birefringence (RIB). EP 08022585.7 – 1223.

H. Rong, P. Greiwe, J. Groll, C. Mohr, M. Glesius, M. Moeller: Silyl-functional linear prepolymers production and use thereof. WO2009024449A1.

H. Rong, P. Greiwe, J. Groll, C. Mohr, M. Glesius, M. Moeller: Production of multifunctional star prepolymers and mixtures of them for use in coatings, detergents and surface treatment products. WO2009024450A2.

Gbureck Uwe, Zubereitung für Magnesiumammoniumphosphat-Zemente, Deutsche Patentanmeldung 2008, DE 102008010210A1

Barralet Jake, Gbureck Uwe: Bioactive implants having bioactive substance; Patentanmeldung US 60/888,708 und PCT/CA2008/000248

H. Rong, S. Stumpe, M. Lueken, M. Weide, J. Groll, P. Greiwe: Cleaning compositions for treating hard surfaces. WO2008068236A1.

H. Rong, J. Groll, P. Greiwe, G. Schechner, C. Mohr, M. Möller: Multifunctional star-shaped prepolymers for use in coatings. WO 2007096056A1.

M. Möller, J. Groll, T. Ameringer, C. Mourran, H. Rong, S. Levi: Arrays of immobilized biomolecules on hydrogel-forming surfaces, production thereof, and use thereof. WO2005014695A1.

M. Möller, J. Groll, H. Rong, S. Levi: Microarrays of immobilized biomolecules, production and use thereof. WO2005014852A1.

Barralet Jake, Gbureck Uwe, Thull Roger, Improved Calcium Phosphate Bone Cements, WO002004103419A1

M. Geffers, U. Gbureck, C. Moseke, E. Vorndran: Organic/Inorganic Hybrid Nanoceramics Based on Sol-Gel Chemistry.
Handbook of nanoceramic and nanocomposite coatings and materials, Elsevier 2015.

C. Moseke, U. Gbureck: Tetracalcium phosphate-based dental cements.
Calcium Phosphate: Structure, Synthesis, Properties, and Applications, Nova Science Publishers 2012.

J. Groll, M. Moeller: Surface Passivation for Single Molecule Detection.
Encyclopedia of Biophysics, Springer 2012.

F. Topuz, D. Buenger, D. Tanaka, J. Groll: Hydrogels in Biosensing Applications.
Comprehensive Biomaterials. Elsevier 2011.

C. Moseke, R. Michalek, R. Thull. Time resolved determination of protein adsorption using Quartz-Crystal Microgravimetry with Dissipation Monitoring (QCM-D), in: J. Breme, C.J. Kirkpatrick, R. Thull (Hrsg.), Metallic Biomaterial Interfaces (Monographie), Wiley, 2008

A. Ewald, P. Elter, R. Thull: Characterisation of Surface-dependent protein adsorption; in: Interface between material and biosystem (Ed.: R. Thull, J. Breme, C.J. Kirkpatrick), Wiley VCH 2008, p. 173-178.

A. Ewald, R. Thull: Surface structure-dependent protein expression in adsorbed cells; in: Interface between material and biosystem (Ed.: R. Thull, J. Breme, C.J. Kirkpatrick), Wiley VCH 2008, p. 184-187.

D. Tebbe, U. Gbureck, R. Thull: Modifying Titanium Surfaces with Glycoaminglycanes for Hemocompatibility, in: Interface between material and biosystem (Ed.: R. Thull, J. Breme, C.J. Kirkpatrick), Wiley VCH 2008, p. 92-101.

R. Thull, U. Gbureck: “Biomaterialien”, Enzyklopädie Naturwissenschaft und Technik, ecomed 2003, Landsberg/Lech, S. 1-7.

R. Thull, U. Gbureck, F. Macionczyk: Surface modifications on metals for hard and soft tissue contact, Nova Acta Leopoldina NF 84, Nr. 321, 121-136 (2001).