Publications

Cianciosi A, Simon J, Bartolf-Kopp M, Grausgruber H, Dargaville TR, Forget A, Groll J, Jungst T, Beaumont M, Direct ink writing of multifunctional nanocellulose and allyl-modified gelatin biomaterial inks for the fabrication of mechanically and functionally graded constructs, Carbohydr Polym 319 (2023) 121145

Schroter L, Kaiser F, Preissler AL, Wohlfahrt P, Kuppers O, Gbureck U, Ignatius A, Ready-To-Use and Rapidly Biodegradable Magnesium Phosphate Bone Cement: In Vivo Evaluation in Sheep, Adv Healthc Mater 12(26) (2023) e2300914

Schaefer N, Andrade Mier MS, Sonnleitner D, Murenu N, Ng XJ, Lamberger Z, Buechner M, Trossmann VT, Schubert DW, Scheibel T, Lang G, Rheological and Biological Impact of Printable PCL-Fibers as Reinforcing Fillers in Cell-Laden Spider-Silk Bio-Inks, Small Methods 7(10) (2023) e2201717

Hoelscher-Doht S, Heilig M, von Hertzberg-Boelch SP, Jordan MC, Gbureck U, Meffert RH, Heilig P, Experimental magnesium phosphate cement paste increases torque of trochanteric fixation nail advanced blades in human femoral heads, Clin Biomech (Bristol, Avon) 109 (2023) 106088

Andrade Mier MS, Bakirci E, Stahlhut P, Blum R, Dalton PD, Villmann C, Primary Glial Cell and Glioblastoma Morphology in Cocultures Depends on Scaffold Design and Hydrogel Composition, Adv Biol (Weinh) 7(10) (2023) e2300029

Weigel T, Christ B, Dembski S, Ewald A, Groneberg D, Hansmann J, Luxenhofer R, Metzger M, Walles H, Willy C, Groeber-Becker F, Probst J, Biomimetic Connection of Transcutaneous Implants with Skin, Adv Healthc Mater  (2023) e2301131

Tandon B, Züge AB, Luposchainsky S, Dalton PD, Effects of Electrode Design on the Melt Electrowriting of Sinusoidal Structures, Advanced Engineering Materials 25(17) (2023)

Kaiser F, Schroter L, Wohlfahrt P, Geroneit I, Murek J, Stahlhut P, Weichhold J, Ignatius A, Gbureck U, Exploring the potential of magnesium oxychloride, an amorphous magnesium phosphate, and newberyite as possible bone cement candidates, J Biomater Appl 38(3) (2023) 438-454

Cianciosi A, Stecher S, Loffler M, Bauer-Kreisel P, Lim KS, Woodfield TBF, Groll J, Blunk T, Jungst T, Flexible Allyl-Modified Gelatin Photoclick Resin Tailored for Volumetric Bioprinting of Matrices for Soft Tissue Engineering, Adv Healthc Mater  (2023) e2300977

Weichhold J, Pfeiffle M, Kade JC, Hurle K, Gbureck U, Aqueous Calcium Phosphate Cement Inks for 3D Printing, Advanced Engineering Materials  (2023)

Grossbacher G, Bartolf-Kopp M, Gergely C, Bernal PN, Florczak S, de Ruijter M, Rodriguez NG, Groll J, Malda J, Jungst T, Levato R, Volumetric Printing Across Melt Electrowritten Scaffolds Fabricates Multi-Material Living Constructs with Tunable Architecture and Mechanics, Adv Mater 35(32) (2023) e2300756

Achenbach P, Hillerbrand L, Gerardo-Nava JL, Dievernich A, Hodde D, Sechi AS, Dalton PD, Pich A, Weis J, Altinova H, Brook GA, Function Follows Form: Oriented Substrate Nanotopography Overrides Neurite-Repulsive Schwann Cell-Astrocyte Barrier Formation in an In Vitro Model of Glial Scarring, Nano Lett 23(14) (2023) 6337-6346

Fuchs A, Bartolf-Kopp M, Bohm H, Straub A, Kubler AC, Linz C, Gbureck U, Composite grafts made of polycaprolactone fiber mats and oil-based calcium phosphate cement pastes for the reconstruction of cranial and maxillofacial defects, Clin Oral Investig 27(6) (2023) 3199-3209

Ewald A, Fuchs A, Boegelein L, Grunz JP, Kneist K, Gbureck U, Hoelscher-Doht S, Degradation and Bone-Contact Biocompatibility of Two Drillable Magnesium Phosphate Bone Cements in an In Vivo Rabbit Bone Defect Model, Materials (Basel) 16(13) (2023)

Elgheznawy A, Oftering P, Englert M, Mott K, Kaiser F, Kusch C, Gbureck U, Bosl MR, Schulze H, Nieswandt B, Vogtle T, Hermanns HM, Loss of zinc transporters ZIP1 and ZIP3 augments platelet reactivity in response to thrombin and accelerates thrombus formation in vivo, Front Immunol 14 (2023) 1197894

Scheller L, Bachmann S, Zorn T, Hanio S, Gbureck U, Fatouros D, Poppler AC, Meinel L, Solid microemulsion preconcentrates on pH responsive metal-organic framework for tableting, Eur J Pharm Biopharm 186 (2023) 105-111

Keller T, Trinks N, Brand J, Trippmacher S, Stahlhut P, Albrecht K, Papastavrou G, Koepsell H, Sauer M, Groll J, Design of Nanohydrogels for Targeted Intracellular Drug Transport to the Trans-Golgi Network, Adv Healthc Mater 12(13) (2023) e2201794

Holeczek K, Gbureck U, Jungst T, Gergely C, Galaba L, Kade JC, Digital Light-Processing (DLP) 3D Printing of Magnesium Phosphate Minerals and Cements, Advanced Engineering Materials 25(8) (2023)

Gefel E, Moseke C, Schmitt A-M, Dümmler N, Stahlhut P, Ewald A, Meyer-Lindenberg A, Vorndran E, Degradation of 3D-printed magnesium phosphate ceramics in vitro and a prognosis on their bone regeneration potential, Bioact Mater 19 (2023) 376-391

Renner T, Otto P, Kubler AC, Holscher-Doht S, Gbureck U, Novel adhesive mineral-organic bone cements based on phosphoserine and magnesium phosphates or oxides, 18.08.2021 34(4) (2023) 14

Genc H, Cianciosi A, Lohse R, Stahlhut P, Groll J, Alexiou C, Cicha I, Jungst T, Adjusting Degree of Modification and Composition of gelAGE-Based Hydrogels Improves Long-Term Survival and Function of Primary Human Fibroblasts and Endothelial Cells in 3D Cultures, Biomacromolecules 24(3) (2023) 1497-1510

Doryab A, Groll J, Biomimetic In Vitro Lung Models: Current Challenges and Future Perspective, Adv Mater 35(13) (2023) e2210519

Soliman BG, Longoni A, Wang M, Li WL, Bernal PN, Cianciosi A, Lindberg GCJ, Malda J, Groll J, Jungst T, Levato R, Rnjak-Kovacina J, Woodfield TBF, Zhang YS, Lim KS, Programming Delayed Dissolution Into Sacrificial Bioinks For Dynamic Temporal Control of Architecture within 3D-Bioprinted Constructs, Advanced Functional Materials 33(8) (2023)

Ouhaddi Y, Charbonnier B, Porge J, Zhang YL, Garcia I, Gbureck U, Grover L, Gilardino M, Harvey E, Makhoul N, Barralet J, Development of Neovasculature in Axially Vascularized Calcium Phosphate Cement Scaffolds, J Funct Biomater 14(2) (2023)

Lamberger Z, Zainuddin S, Scheibel T, Lang G, Polymeric Janus Fibers, Chempluschem 88(2) (2023) e202200371

Pereira AR, Trivanovic D, Stahlhut P, Rudert M, Groll J, Herrmann M, Preservation of the naive features of mesenchymal stromal cells in vitro: Comparison of cell- and bone-derived decellularized extracellular matrix, J Tissue Eng 13 (2022)

Doryab A, Taskin MB, Stahlhut P, Schröppel A, Wagner DE, Groll J, Schmid O, A Biomimetic, Copolymeric Membrane for Cell‐Stretch Experiments with Pulmonary Epithelial Cells at the Air‐Liquid Interface, Advanced Functional Materials 32(20) (2022)

Zhang Z, Zeng J, Groll J, Matsusaki M, Layer-by-layer assembly methods and their biomedical applications, Biomater Sci (2022)

Weigl F, Blum C, Sancho A, Groll J, Correlative Analysis of Intra- Versus Extracellular Cell Detachment Events via the Alignment of Optical Imaging and Detachment Force Quantification, Adv Mater Technol-Us n/a(n/a) (2022)

Keller T, Koepsell H, Groll J, Evaluation of the Influence of Biosurface Design on the Interaction between the Regulatory Peptide RS1-reg and ODC1 Reveals a Membrane-Dependent Affinity Increase, Advanced Biology n/a(n/a) (2022)

An R, Strissel PL, Al-Abboodi M, Robering JW, Supachai R, Eckstein M, Peddi A, Hauck T, Bäuerle T, Boccaccini AR, Youssef A, Sun J, Strick R, Horch RE, Boos AM, Kengelbach-Weigand A, An Innovative Arteriovenous (AV) Loop Breast Cancer Model Tailored for Cancer Research, Bioengineering 9(7) (2022)

Seifert A, Tylek T, Blum C, Hemmelmann N, Böttcher B, Gbureck U, Groll J, Calcium phosphate-based biomaterials trigger human macrophages to release extracellular traps, Biomaterials 285 (2022)

Gefel, E, Moseke, C, Schmitt, A-M, Dümmler, N, Stahlhut, P, Ewald, A, Meyer-Lindenberg, A, and Vorndran, E, Degradation of 3D-printed magnesium phosphate ceramics in vitro and a prognosis on their bone regeneration potential, Bioactive Materials (2022) 19, 376–391

Pien N, Bartolf‐Kopp M, Parmentier L, Delaey J, De Vos L, Mantovani D, Van Vlierberghe S, Dubruel P, Jungst T, Melt Electrowriting of a Photo‐Crosslinkable Poly(ε‐Caprolactone)‐Based Material into Tubular Constructs with Predefined Architecture and Tunable Mechanical Properties, Macromolecular Materials and Engineering (2022)

 Ryma M, Genc H, Nadernezhad A, Paulus I, Schneidereit D, Friedrich O, Andelovic K, Lyer S, Alexiou C, Cicha I, Groll J, A print-and-fuse Strategy for Sacrificial Filaments Enables Biomimetically Structured Perfusable Microvascular Networks with Functional Endothelium Inside 3D Hydrogels, Adv Mater   (2022) e2200653

Kaiser F, Schröter L, Stein S, Ignatius A, Gbureck U, Accelerated bone regeneration through rational design of magnesium phosphate cements, Acta Biomater (2022);145:358-371

Kuth S, Karakaya E, Reiter N, Schmidt L, Paulsen F, Tessmar J, Budday S, Boccaccini AR, Oxidized hyaluronic acid-gelatin based hydrogels for tissue engineering and soft tissue mimicking, Tissue Eng Part C Methods (2022)

Haag H, Sonnleitner D, Lang G, Dalton PD, Melt electrowriting to produce microfiber fragments, Polymers for Advanced Technologies (2022)

Heid S, Becker K, Byun J, Biermann I, Nescakova Z, Zhu H, Groll J, Boccaccini AR, Bioprinting with bioactive alginate dialdehyde-gelatin (ADA-GEL) composite bioinks: Time-dependent in-situ crosslinking via addition of calcium-silicate particles tunes in vitro stability of 3D bioprinted constructs, Bioprinting 26 (2022)

Karakaya E, Bider F, Frank A, Teßmar J, Schöbel L, Forster L, Schrüfer S, Schmidt H-W, Schubert DW, Blaeser A, Boccaccini AR, Detsch R, Targeted Printing of Cells: Evaluation of ADA-PEG Bioinks for Drop on Demand Approaches, Gels 8(4) (2022)

Mair V, Paulus I, Groll J, Ryma M, Freeform printing of thermoresponsive poly(2-cyclopropyl-oxazoline) as cytocompatible and on-demand dissolving template of hollow channel networks in cell-laden hydrogels, Biofabrication 14(2) (2022)

Rodel M, Tessmar J, Groll J, Gbureck U, Dual setting brushite-gelatin cement with increased ductility and sustained drug release, J Biomater Appl (2022)

Weichhold J, Goetz-Neunhoeffer F, Hurle K, Gbureck U, Pyrophosphate ions inhibit calcium phosphate cement reaction and enable storage of premixed pastes with a controlled activation by orthophosphate addition, Ceramics International (2022)

Wu M, Müller L, Schilling T, Gbureck U, Wang T, Müller FA, Physico-chemical characterization, bioactivity evaluation and cytotoxicity of PDA nanoparticles doped tricalcium silicate cements, Ceramics International 48(2) (2022) 2872-2881

Böhm C, Tandon B, Hrynevich A, Teßmar J, Dalton PD, Processing of Poly(lactic‐co‐glycolic acid) Microfibers via Melt Electrowriting, Macromolecular Chemistry and Physics (2022)

Hauptstein J, Forster L, Nadernezhad A, Groll J, Tessmar J, Blunk T, Tethered TGF-beta1 in a Hyaluronic Acid-Based Bioink for Bioprinting Cartilaginous Tissues, Int J Mol Sci 23(2) (2022)

Heilig P, Jordan MC, Paul MM, Kupczyk E, Meffert RH, Gbureck U, Hoelscher-Doht S, Augmentation of suture anchors with magnesium phosphate cement – Simple technique with striking effect, Journal of the Mechanical Behavior of Biomedical Materials 128 (2022)

Hu C, Ahmad T, Haider MS, Hahn L, Stahlhut P, Groll J, Luxenhofer R, A thermogelling organic-inorganic hybrid hydrogel with excellent printability, shape fidelity and cytocompatibility for 3D bioprinting, Biofabrication 14(2) (2022)

Sancho A, Taskin MB, Wistlich L, Stahlhut P, Wittmann K, Rossi A, Groll J, Cell Adhesion Assessment Reveals a Higher Force per Contact Area on Fibrous Structures Compared to Flat Substrates, ACS Biomater Sci Eng 8(2) (2022) 649-658

Janzen D, Bakirci E, Faber J, Mier MA, Hauptstein J, Pal A, Forster L, Hazur J, Boccaccini AR, Detsch R, Tessmar J, Budday S, Blunk T, Dalton PD, Villmann C, Reinforced Hyaluronic acid-based Matrices promote 3D Neuronal Network Formation, Adv Healthc Mater (2022) e2201826

Nadernezhad A, Groll J, Machine Learning Reveals a General Understanding of Printability in Formulations Based on Rheology Additives, Adv Sci (Weinh) (2022) e2202638

Kowalewicz K, Waselau A-C, Feichtner F, Schmitt A-M, Brückner M, Vorndran E, Meyer-Lindenberg A, Comparison of degradation behavior and osseointegration of 3D powder-printed calcium magnesium phosphate cement scaffolds with alkaline or acid post-treatment, Front. Bioeng. Biotechnol. 28 (2022)

Hahn L, Beudert M, Gutmann M, Kessler L, Stahlhut P, Fischer L, Karakaya E, Lorson T, Thievessen I, Detsch R, Luhmann T, Luxenhofer R, From Thermogelling Hydrogels toward Functional Bioinks: Controlled Modification and Cytocompatible Crosslinking, Macromol Biosci 21(10) (2021) e2100122

Bohm C, Stahlhut P, Weichhold J, Hrynevich A, Tessmar J, Dalton PD, The Multiweek Thermal Stability of Medical-Grade Poly(epsilon-caprolactone) During Melt Electrowriting, Small doi:10.1002/smll.202104193  (2021) e2104193

Eberle F, Gruska A-K, Filippi B, Stahlhut P, Wallace GG, Dalton PD, Beirne S, Hollow‐Fiber Melt Electrowriting Using a 3D‐Printed Coaxial Nozzle, Advanced Engineering Materials doi:10.1002/adem.202100750  (2021)

Lutter F, Stahlhut P, Dremel K, Zabler S, Fell J, Herrmann H-G, Hanke R, Combining X-ray Nano Tomography with focused ion beam serial section imaging — Application of correlative tomography to integrated circuits, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 500-501 (2021) 10-17

Hahn L, Karakaya E, Zorn T, Sochor B, Maier M, Stahlhut P, Forster S, Fischer K, Seiffert S, Poppler AC, Detsch R, Luxenhofer R, An Inverse Thermogelling Bioink Based on an ABA-Type Poly(2-oxazoline) Amphiphile, Biomacromolecules 22(7) (2021) 3017-3027

Haider MS, Ahmad T, Groll J, Scherf-Clavel O, Kroiss M, Luxenhofer R, The Challenging Pharmacokinetics of Mitotane: An Old Drug in Need of New Packaging, Eur J Drug Metab Pharmacokinet 46(5) (2021) 575-593

Haider MS, Ahmad T, Yang M, Hu C, Hahn L, Stahlhut P, Groll J, Luxenhofer R, Tuning the Thermogelation and Rheology of Poly(2-Oxazoline)/Poly(2-Oxazine)s Based Thermosensitive Hydrogels for 3D Bioprinting, Gels 7(3) (2021)

Shan J, Bock T, Keller T, Forster L, Blunk T, Groll J, Tessmar J, TEMPO/TCC as a Chemo Selective Alternative for the Oxidation of Hyaluronic Acid, Molecules 26(19) (2021)

Fuchs A, Kreczy D, Bruckner T, Gbureck U, Stahlhut P, Bengel M, Hoess A, Nies B, Bator J, Klammert U, Linz C, Ewald A, Bone regeneration capacity of newly developed spherical magnesium phosphate cement granules, Clin Oral Investig doi:10.1007/s00784-021-04231-w  (2021)

Gotz LM, Holeczek K, Groll J, Jungst T, Gbureck U, Extrusion-Based 3D Printing of Calcium Magnesium Phosphate Cement Pastes for Degradable Bone Implants, Materials (Basel) 14(18) (2021)

Ludemann M, Jakuscheit A, Ewald A, Fruhmann L, Holscher-Doht S, Rudert M, von Hertzberg-Boelch SP, Influence of Tranexamic Acid on Elution Characteristics and Compressive Strength of Antibiotic-Loaded PMMA-Bone Cement with Gentamicin, Materials (Basel) 14(19) (2021) 5639

Bernhardt A, Bacova J, Gbureck U, Gelinsky M, Influence of Cu(2+) on Osteoclast Formation and Activity In Vitro, Int J Mol Sci 22(5) (2021)

Heilig P, Sandner P, Jordan MC, Jakubietz RG, Meffert RH, Gbureck U, Hoelscher-Doht S, Experimental Drillable Magnesium Phosphate Cement Is a Promising Alternative to Conventional Bone Cements, Materials (Basel) 14(8) (2021)

Zhou H, Yang L, Gbureck U, Bhaduri SB, Sikder P, Monetite, an important calcium phosphate compound-Its synthesis, properties and applications in orthopedics, Acta Biomater 127 (2021) 4155

Seifert A, Gruber J, Gbureck U, Groll J, Morphological Control of Freeze-Structured Scaffolds by Selective Temperature and Material Control in the Ice-Templating Process, Advanced Engineering Materials (2021)

Reddersen K, Gullmar A, Tonndorf-Martini S, Sigusch BW, Ewald A, Dauben TJ, Martin K, Wiegand C, Critical parameters in cultivation of experimental biofilms using the example of Pseudomonas fluorescens, 18.08.2021 32(9) (2021) 96

Ryma M, Tylek T, Liebscher J, Blum C, Fernandez R, Bohm C, Kastenmuller W, Gasteiger G, Groll J, Translation of Collagen Ultrastructure to Biomaterial Fabrication for Material-Independent but Highly Efficient Topographic Immunomodulation, Adv Mater 33(33) (2021) e2101228

Pinzner F, Keller T, Mut J, Bechold J, Seibel J, Groll J, Polyoxazolines with a Vicinally Double-Bioactivated Terminus for Biomacromolecular Affinity Assessment, Sensors (Basel) 21(9) (2021)

Blum C, Weichhold J, Hochleitner G, Stepanenko V, Wurthner F, Groll J, Jungst T, Controlling Topography and Crystallinity of Melt Electrowritten Poly(e-Caprolactone) Fibers, 3d Printing and Additive Manufacturing doi:10.1089/3dp.2020.0290  (2021)

Doryab A, Taskin MB, Stahlhut P, Schroppel A, Orak S, Voss C, Ahluwalia A, Rehberg M, Hilgendorff A, Stoger T, Groll J, Schmid O, A Bioinspired in vitro Lung Model to Study Particokinetics of Nano-/Microparticles Under Cyclic Stretch and Air-Liquid Interface Conditions, Front Bioeng Biotechnol 9 (2021) 616830

Genc H, Hazur J, Karakaya E, Dietel B, Bider F, Groll J, Alexiou C, Boccaccini AR, Detsch R, Cicha I, Differential Responses to Bioink-Induced Oxidative Stress in Endothelial Cells and Fibroblasts, Int J Mol Sci 22(5) (2021)

Horder H, Guaza Lasheras M, Grummel N, Nadernezhad A, Herbig J, Ergun S, Tessmar J, Groll J, Fabry B, Bauer-Kreisel P, Blunk T, Bioprinting and Differentiation of Adipose-Derived Stromal Cell Spheroids for a 3D Breast Cancer-Adipose Tissue Model, Cells-Basel 10(4) (2021)

Li W, Sancho A, Chung WL, Vinik Y, Groll J, Zick Y, Medalia O, Bershadsky AD, Geiger B, Differential cellular responses to adhesive interactions with galectin-8- and fibronectin-coated substrates, J Cell Sci 134(8) (2021)

Abd El-Aziz AM, El-Maghraby A, Ewald A, Kandil SH, In-Vitro Cytotoxicity Study: Cell Viability and Cell Morphology of Carbon Nanofibrous Scaffold/Hydroxyapatite Nanocomposites, Molecules 26(6) (2021)

Taskin MB, Ahmad T, Wistlich L, Meinel L, Schmitz M, Rossi A, Groll J, Bioactive Electrospun Fibers: Fabrication Strategies and a Critical Review of Surface-Sensitive Characterization and Quantification, Chem Rev 121(18) (2021) 11194-11237

Blum C, Taskin MB, Shan J, Schilling T, Schlegelmilch K, Tessmar J, Groll J, Appreciating the First Line of the Human Innate Immune Defense: A Strategy to Model and Alleviate the Neutrophil Elastase-Mediated Attack toward Bioactivated Biomaterials, Small 17(13) (2021) e2007551

Lutz J, Albrecht K, Groll J, Thioether‐Polymer Coating for Colloidal Stabilization of Silver Nanoparticles, Advanced NanoBiomed Research 1(5) (2021)

Kowalewicz K, Vorndran E, Feichtner F, Waselau AC, Brueckner M, Meyer-Lindenberg A, In-Vivo Degradation Behavior and Osseointegration of 3D Powder-Printed Calcium Magnesium Phosphate Cement Scaffolds, Materials (Basel) 14(4) (2021)

Seifert A, Groll J, Weichhold J, Boehm AV, Müller FA, Gbureck U, Phase Conversion of Ice‐Templated α‐Tricalcium Phosphate Scaffolds into Low‐Temperature Calcium Phosphates with Anisotropic Open Porosity, Advanced Engineering Materials 23(5) (2021)

Holzmeister I, Weichhold J, Groll J, Zreiqat H, Gbureck U, Hydraulic reactivity and cement formation of baghdadite, J. Am. Ceram. Soc. 104(7) (2021) 3554-3561

Muir VG, Qazi TH, Shan J, Groll J, Burdick JA, Influence of Microgel Fabrication Technique on Granular Hydrogel Properties, ACS Biomater Sci Eng 7(9) (2021) 4269-4281

Kim J, Bakirci E, O’Neill KL, Hrynevich A, Dalton PD, Fiber Bridging during Melt Electrowriting of Poly(ε‐Caprolactone) and the Influence of Fiber Diameter and Wall Height, Macromolecular Materials and Engineering 306(3) (2021) 2000685

Kade JC, Dalton PD, Polymers for Melt Electrowriting, Adv Healthc Mater 10(1) (2021) e2001232

Pham DQ, Berndt CC, Cizek J, Gbureck U, Zreiqat H, Lu Z, Ang ASM, Baghdadite coating formed by hybrid water-stabilized plasma spray for bioceramic applications: Mechanical and biological evaluations, Materials science & engineering. C, Materials for biological applications 122 (2021) 111873

Muller SJ, Weigl F, Bezold C, Bacher C, Albrecht K, Gekle S, A hyperelastic model for simulating cells in flow, Biomech Model Mechanobiol 20(2) (2021) 509-520

Hu C, Hahn L, Yang M et al. Improving printability of a thermoresponsive hydrogel biomaterial ink by nanoclay addition. J Mater Sci. 2021;56:691–705.

Ancarola ME, Lichtenstein G, Herbig J, Holroyd N, Mariconti M, et al. Extracellular non-coding RNA signatures of the metacestode stage of Echinococcus multilocularis. PLOS Neglected Tropical Diseases. 2020;14(11):e0008890.

Charbonnier B, Maillard S, Sayed O, Baradaran A, Mangat H, Dalisson B, et al. Biomaterial-Induction of a Transplantable Angiosome. Advanced Functional Materials. 2020;30(1).

Liebscher J, Tessmar J, Groll J. In Situ Polymer Analogue Generation of Azlactone Functions at Poly(oxazoline)s for Peptide Conjugation. Macromolecular Chemistry and Physics. 2020;221(1).

Chung JHY, Kade JC, Jeiranikhameneh A, Ruberu K, Mukherjee P, Yue Z, et al. 3D hybrid printing platform for auricular cartilage reconstruction. Biomedical Physics & Engineering Express. 2020;6(3).

Diloksumpan P, de Ruijter M, Castilho M, Gbureck U, Vermonden T, van Weeren PR, et al. Combining multi-scale 3D printing technologies to engineer reinforced hydrogel-ceramic interfaces. Biofabrication. 2020;12(2):025014.

Wolf-Brandstetter C, Beutner R, Hess R, Bierbaum S, Wagner K, Scharnweber D, et al. Multifunctional calcium phosphate based coatings on titanium implants with integrated trace elements. Biomed Mater. 2020;15(2):025006.

Wysotzki P, Sancho A, Gimsa J, Groll J. A comparative analysis of detachment forces and energies in initial and mature cell-material interaction. Colloids Surf B Biointerfaces. 2020;190:110894.

Dalton PD, Woodfield TBF, Mironov V, Groll J. Advances in Hybrid Fabrication toward Hierarchical Tissue Constructs. Adv Sci (Weinh). 2020;7(11):1902953.

Horvat S, Vogel P, Kampf T, Brandl A, Alshamsan A, Alhadlaq HA, et al. Crosslinked Coating Improves the Signal-to-Noise Ratio of Iron Oxide Nanoparticles in Magnetic Particle Imaging (MPI). Chemnanomat. 2020;6(5):755-8.

Sun W, Starly B, Daly AC, Burdick JA, Groll J, Skeldon G, et al. The bioprinting roadmap. Biofabrication. 2020;12(2):022002.

Hazur J, Detsch R, Karakaya E, Kaschta J, Tessmar J, Schneidereit D, et al. Improving alginate printability for biofabrication: establishment of a universal and homogeneous pre-crosslinking technique. Biofabrication. 2020;12(4):045004.

Mancini IAD, Schmidt S, Brommer H, Pouran B, Schafer S, Tessmar J, et al. A composite hydrogel-3D printed thermoplast osteochondral anchor as example for a zonal approach to cartilage repair: in vivo performance in a long-term equine model. Biofabrication. 2020;12(3):035028.

Nadernezhad A, Forster L, Netti F, Adler-Abramovich L, Tessmar J, Groll J. Rheological analysis of the interplay between the molecular weight and concentration of hyaluronic acid in formulations of supramolecular HA/FmocFF hybrid hydrogels. Polym J. 2020;52(8):1007-12.

Weissenberger M, Weissenberger MH, Gilbert F, Groll J, Evans CH, Steinert AF. Reduced hypertrophy in vitro after chondrogenic differentiation of adult human mesenchymal stem cells following adenoviral SOX9 gene delivery. BMC Musculoskelet Disord. 2020;21(1):109.

Schmitz T, Jannasch M, Weigel T, Moseke C, Gbureck U, Groll J, et al. Nanotopographical Coatings Induce an Early Phenotype-Specific Response of Primary Material-Resident M1 and M2 Macrophages. Materials (Basel). 2020;13(5).

Nahm D, Weigl F, Schafer N, Sancho A, Frank A, Groll J, et al. A versatile biomaterial ink platform for the melt electrowriting of chemically-crosslinked hydrogels. Mater Horiz. 2020;7(3):928-33.

Hahn L, Maier M, Stahlhut P, Beudert M, Flegler V, Forster S, et al. Inverse Thermogelation of Aqueous Triblock Copolymer Solutions into Macroporous Shear-Thinning 3D Printable Inks. ACS Appl Mater Interfaces. 2020;12(11):12445-56.

Moseke C, Wimmer K, Meininger M, Zerweck J, Wolf-Brandstetter C, Gbureck U, et al. Osteoclast and osteoblast response to strontium-doped struvite coatings on titanium for improved bone integration. Biomed Tech (Berl). 2020;65(5):631-41.

Hauptstein J, Bock T, Bartolf-Kopp M, Forster L, Stahlhut P, Nadernezhad A, et al. Hyaluronic Acid-Based Bioink Composition Enabling 3D Bioprinting and Improving Quality of Deposited Cartilaginous Extracellular Matrix. Adv Healthc Mater. 2020;9(15):e2000737.

Schmid R, Schmidt SK, Hazur J, Detsch R, Maurer E, Boccaccini AR, et al. Comparison of Hydrogels for the Development of Well-Defined 3D Cancer Models of Breast Cancer and Melanoma. Cancers (Basel). 2020;12(8).

Golafshan N, Vorndran E, Zaharievski S, Brommer H, Kadumudi FB, Dolatshahi-Pirouz A, et al. Tough magnesium phosphate-based 3D-printed implants induce bone regeneration in an equine defect model. Biomaterials. 2020;261.

Schroter L, Kaiser F, Stein S, Gbureck U, Ignatius A. Biological and mechanical performance and degradation characteristics of calcium phosphate cements in large animals and humans. Acta biomaterialia. 2020;117:1-20.

Boehm AV, Meininger S, Gbureck U, Mueller FA. Self-healing capacity of fiber-reinforced calcium phosphate cements. Scientific Reports. 2020;10(1).

Bolanos RV, Castilho M, de Grauw J, Cokelaere S, Plomp S, Groll J, et al. Long-Term in Vivo Performance of Low-Temperature 3D-Printed Bioceramics in an Equine Model. Acs Biomaterials Science & Engineering. 2020;6(3):1681-9.

Vieira D, Angel S, Honjol Y, Gruenheid S, Gbureck U, Harvey E, et al. Electroceutical Silk-Silver Gel to Eradicate Bacterial Infection. Advanced Biosystems. 2020;4(4):1900242-Article No.: .

Salas-Ramirez M, Tran-Gia J, Gbureck U, Kosmala A, Lassmann M. Quantification of the trabecular bone volume fraction for bone marrow dosimetry in molecular radiotherapy by using a dual-energy (SPECT/)CT (vol 64, 205014, 2019). Physics in Medicine and Biology. 2020;65(2).

Kaiser F, Scharnweber D, Bierbaum S, Wolf-Brandstetter C. Success and side effects of different treatment options in the low current attack of bacterial biofilms on titanium implants. Bioelectrochemistry. 2020;133:107485.

Borova Solomiia TV, Stahlhut Philipp, Luxenhofer Robert. Crosslinking of hydrophilic polymers using polyperoxides. Colloid Polymer Science. 2020;298:1699-713.

Bakirci E, Schaefer N, Dahri O, Hrynevich A, Strissel P, Strick R, et al. Melt Electrowritten In Vitro Radial Device to Study Cell Growth and Migration. Adv Biosyst. 2020;4(10):e2000077.

Grosshaus C, Bakirci E, Berthel M, Hrynevich A, Kade JC, Hochleitner G, et al. Melt Electrospinning of Nanofibers from Medical-Grade Poly(epsilon-Caprolactone) with a Modified Nozzle. Small. 2020.

Hrynevich A, Liashenko I, Dalton PD. Accurate Prediction of Melt Electrowritten Laydown Patterns from Simple Geometrical Considerations. Adv Mater Technol-Us. 2020.

Janzen D, Bakirci E, Wieland A, Martin C, Dalton PD, Villmann C. Cortical Neurons form a Functional Neuronal Network in a 3D Printed Reinforced Matrix. Advanced Healthcare Materials. 2020;9(9).

Kade JC, Dalton PD. Polymers for Melt Electrowriting. Advanced Healthcare Materials. 2020.

Liashenko I, Hrynevich A, Dalton PD. Designing Outside the Box: Unlocking the Geometric Freedom of Melt Electrowriting using Microscale Layer Shifting. Adv Mater. 2020;32(28):e2001874.

Wang S, Sarwat M, Wang P, Surrao DC, Harkin DG, St John JA, et al. Hydrogels with Cell Adhesion Peptide-Decorated Channel Walls for Cell Guidance. Macromolecular Rapid Communications. 2020;41(15).

Horvat S, Yu Y, Böjte S, Teßmer I, Lowman DW, Ma Z, et al. Engineering Nanogels for Drug Delivery to Pathogenic Fungi Aspergillus fumigatus by Tuning Polymer Amphiphilicity. Biomacromolecules. 2020;21:3112-21.

Yu Y, Albrecht K, Groll DJ, Beilhack A. Innovative therapies for invasive fungal infections in preclinical and clinical development. Expert Opinion on Investigational Drugs. 2020;29(9):961-71.

Muller SJ, Weigl F, Bezold C, Bacher C, Albrecht K, Gekle S. A hyperelastic model for simulating cells in flow. Biomech Model Mechanobiol. 2020.

Levato R, Jungst T, Scheuring RG, Blunk T, Groll J, Malda J. From Shape to Function: The Next Step in Bioprinting. Adv Mater. 2020;32(12):e1906423.

Lorson T, Ruopp M, Nadernezhad A, Eiber J, Vogel U, Jungst T, et al. Sterilization Methods and Their Influence on Physicochemical Properties and Bioprinting of Alginate as a Bioink Component. ACS Omega. 2020;5(12):6481-6.

Soliman BG, Lindberg GCJ, Jungst T, Hooper GJ, Groll J, Woodfield TBF, et al. Stepwise Control of Crosslinking in a One-Pot System for Bioprinting of Low-Density Bioinks. Adv Healthc Mater. 2020;9(15):e1901544.

Bakirci E, Tschan K, May RD, Ahmad SS, Kleer B, Gantenbein B. The importance of plasmin for the healing of the anterior cruciate ligament. Bone Joint Res. 2020;9(9):543-53.

Mechau J, Frank A, Bakirci E, Gumbel S, Jungst T, Giesa R, et al. Hydrophilic (AB)n Segmented Copolymers for Melt Extrusion‐Based Additive Manufacturing. Macromolecular Chemistry and Physics. 2020.

Tylek T, Blum C, Hrynevich A, Schlegelmilch K, Schilling T, Dalton PD, et al. Precisely defined fiber scaffolds with 40 mum porosity induce elongation driven M2-like polarization of human macrophages. Biofabrication. 2020;12(2):025007.

Mridha AR, Dargaville TR, Dalton PD, Carroll L, Morris MB, Vaithilingam V, et al. Prevascularized Retrievable Hybrid Implant to Enhance Function of Subcutaneous Encapsulated Islets. Tissue Eng Part A. 2020.

Meininger S, Moseke C, Spatz K, Marz E, Blum C, Ewald A, et al. Effect of strontium substitution on the material properties and osteogenic potential of 3D powder printed magnesium phosphate scaffolds. Materials science & engineering C, Materials for biological applications. 2019;98:1145-58.

Fuchs A, Youssef A, Seher A, Hochleitner G, Dalton PD, Hartmann S, et al. Medical-grade polycaprolactone scaffolds made by melt electrospinning writing for oral bone regeneration – a pilot study in vitro. BMC Oral Health. 2019;19(1):28.

Fuchs A, Youssef A, Seher A, Hartmann S, Brands RC, Muller-Richter UDA, et al. A new multilayered membrane for tissue engineering of oral hard- and soft tissue by means of melt electrospinning writing and film casting – An in vitro study. J Craniomaxillofac Surg. 2019;47(4):695-703.

Blohbaum J, Paulus I, Poppler AC, Tessmar J, Groll J. Influence of charged groups on the cross-linking efficiency and release of guest molecules from thiol-ene cross-linked poly(2-oxazoline) hydrogels. J Mater Chem B. 2019;7(10):1782-94.

Ertl J, Ortiz-Soto ME, Le TA, Bechold J, Shan J, Tessmar J, et al. Tuning the Product Spectrum of a Glycoside Hydrolase Enzyme by a Combination of Site-Directed Mutagenesis and Tyrosine-Specific Chemical Modification. Chemistry. 2019;25(26):6533-41.

Bruckner T, Fuchs A, Wistlich L, Hoess A, Nies B, Gbureck U. Prefabricated and Self-Setting Cement Laminates. Materials (Basel). 2019;12(5).

Ryma M, Blohbaum J, Singh R, Sancho A, Matuszak J, Cicha I, et al. Easy-to-Prepare Coating of Standard Cell Culture Dishes for Cell-Sheet Engineering Using Aqueous Solutions of Poly(2-n-propyl-oxazoline). Acs Biomaterials Science & Engineering. 2019;5(3):1509-17.

Tylek T, Schilling T, Schlegelmilch K, Ries M, Rudert M, Jakob F, et al. Platelet lysate outperforms FCS and human serum for co-culture of primary human macrophages and hMSCs. Sci Rep. 2019;9(1):3533.

McMaster R, Hoefner C, Hrynevich A, Blum C, Wiesner M, Wittmann K, et al. Tailored Melt Electrowritten Scaffolds for the Generation of Sheet-Like Tissue Constructs from Multicellular Spheroids. Adv Healthc Mater. 2019;8(7):e1801326.

Schaefer N, Janzen D, Bakirci E, Hrynevich A, Dalton PD, Villmann C. 3D Electrophysiological Measurements on Cells Embedded within Fiber-Reinforced Matrigel. Adv Healthc Mater. 2019;8(5):e1801226.

Bertlein S, Hochleitner G, Schmitz M, Tessmar J, Raghunath M, Dalton PD, et al. Permanent Hydrophilization and Generic Bioactivation of Melt Electrowritten Scaffolds. Adv Healthc Mater. 2019;8(7):e1801544.

Florczak S, Lorson T, Zheng T, Mrlik M, Hutmacher DW, Higgins MJ, et al. Melt electrowriting of electroactive poly(vinylidene difluoride) fibers. Polymer International. 2019;68(4):735-45.

Kotz F, Risch P, Arnold K, Sevim S, Puigmarti-Luis J, Quick A, et al. Fabrication of arbitrary three-dimensional suspended hollow microstructures in transparent fused silica glass. Nat Commun. 2019;10(1):1439.

Wunner FM, Eggert S, Maartens J, Bas O, Dalton PD, De-Juan-Pardo EM, et al. Design and Development of a Three-Dimensional Printing High-Throughput Melt Electrowriting Technology Platform. 3d Printing and Additive Manufacturing. 2019;6(2):82-90.

Wunner FM, Mieszczanek P, Bas O, Eggert S, Maartens J, Dalton PD, et al. Printomics: the high-throughput analysis of printing parameters applied to melt electrowriting. Biofabrication. 2019;11(2):025004.

Youssef A, Hrynevich A, Fladeland L, Balles A, Groll J, Dalton PD, et al. The Impact of Melt Electrowritten Scaffold Design on Porosity Determined by X-Ray Microtomography. Tissue Eng Part C Methods. 2019;25(6):367-79.

No YJ, Holzmeister I, Lu Z, Prajapati S, Shi J, Gbureck U, et al. Effect of Baghdadite Substitution on the Physicochemical Properties of Brushite Cements. Materials (Basel). 2019;12(10).

Brueckner T, Heilig P, Jordan MC, Paul MM, Blunk T, Meffert RH, et al. Biomechanical Evaluation of Promising Different Bone Substitutes in a Clinically Relevant Test Set-Up. Materials (Basel). 2019;12(9).

Noy JM, Li YM, Smolan W, Roth PJ. Azide-para-Fluoro Substitution on Polymers: Multipurpose Precursors for Efficient Sequential Postpolymerization Modification. Macromolecules. 2019;52(8):3083-91.

Weichhold J, Gbureck U, Goetz-Neunhoeffer F, Hurle K. Setting Mechanism of a CDHA Forming alpha-TCP Cement Modified with Sodium Phytate for Improved Injectability. Materials (Basel). 2019;12(13):2098.

Ewald A, Kreczy D, Bruckner T, Gbureck U, Bengel M, Hoess A, et al. Development and Bone Regeneration Capacity of Premixed Magnesium Phosphate Cement Pastes. Materials (Basel). 2019;12(13).

Charbonnier B, Baradaran A, Sato D, Alghamdi O, Zhang Z, Zhang YL, et al. Material-Induced Venosome-Supported Bone Tubes. Adv Sci (Weinh). 2019;6(17):1900844.

 Jungst T, Pennings I, Schmitz M, Rosenberg AJWP, Groll J, Gawlitta D. Heterotypic Scaffold Design Orchestrates Primary Cell Organization and Phenotypes in Cocultured Small Diameter Vascular Grafts. Advanced Functional Materials. 2019;29(43).

Salas-Ramirez M, Tran-Gia J, Gbureck U, Kosmala A, Lassmann M. Quantification of the trabecular bone volume fraction for bone marrow dosimetry in molecular radiotherapy by using a dual-energy (SPECT/)CT. Phys Med Biol. 2019;64(20):205014.

Charbonnier B, Abdulla M, Gorgy A, Shash H, Zhang Z, Gbureck U, et al. Treatment of Critical-Sized Calvarial Defects in Rats with Preimplanted Transplants. Adv Healthc Mater. 2019;8(18):e1900722.

Doryab A, Tas S, Taskin MB, Yang L, Hilgendorff A, Groll J, et al. Evolution of Bioengineered Lung Models: Recent Advances and Challenges in Tissue Mimicry for Studying the Role of Mechanical Forces in Cell Biology. Advanced Functional Materials. 2019;29(39).

Hettich G, Schierjott RA, Epple M, Gbureck U, Heinemann S, Mozaffari-Jovein H, et al. Calcium Phosphate Bone Graft Substitutes with High Mechanical Load Capacity and High Degree of Interconnecting Porosity. Materials (Basel). 2019;12(21).

Stuckensen K, Lamo-Espinosa JM, Muinos-Lopez E, Ripalda-Cemborain P, Lopez-Martinez T, Iglesias E, et al. Anisotropic Cryostructured Collagen Scaffolds for Efficient Delivery of RhBMP-2 and Enhanced Bone Regeneration. Materials (Basel). 2019;12(19).

Blum C, Schlegelmilch K, Schilling T, Shridhar A, Rudert M, Jakob F, et al. Extracellular Matrix-Modified Fiber Scaffolds as a Proadipogenic Mesenchymal Stromal Cell Delivery Platform. Acs Biomaterials Science & Engineering. 2019;5(12):6655-66.

Zilkowski I, Ziouti F, Schulze A, Hauck S, Schmidt S, Mainz L, et al. Nanogels Enable Efficient miRNA Delivery and Target Gene Downregulation in Transfection-Resistant Multiple Myeloma Cells. Biomacromolecules. 2019;20(2):916-26.

Gonzalez-Gil AB, Lamo-Espinosa JM, Muinos-Lopez E, Ripalda-Cemborain P, Abizanda G, Valdes-Fernandez J, et al. Periosteum-derived mesenchymal progenitor cells in engineered implants promote fracture healing in a critical-size defect rat model. J Tissue Eng Regen Med. 2019;13(5):742-52.

Bothe F, Deubel AK, Hesse E, Lotz B, Groll J, Werner C, et al. Treatment of Focal Cartilage Defects in Minipigs with Zonal Chondrocyte/Mesenchymal Progenitor Cell Constructs. Int J Mol Sci. 2019;20(3).

Malda J, Groll J, van Weeren PR. Rethinking articular cartilage regeneration based on a 250-year-old statement. Nat Rev Rheumatol. 2019;15(10):571-2.

Pennings I, van Haaften EE, Jungst T, Bulsink JA, Rosenberg A, Groll J, et al. Layer-specific cell differentiation in bi-layered vascular grafts under flow perfusion. Biofabrication. 2019;12(1):015009.

Bruckner T, Meininger M, Groll J, Kubler AC, Gbureck U. Magnesium Phosphate Cement as Mineral Bone Adhesive. Materials (Basel). 2019;12(23).

Pham DQ, Berndt CC, Gbureck U, Zreiqat H, Truong VK, Ang ASM. Mechanical and chemical properties of Baghdadite coatings manufactured by atmospheric plasma spraying. Surface & Coatings Technology. 2019;378.

Thorat ND, Townley H, Brennan G, Parchur AK, Silien C, Bauer J, et al. Correction to “Progress in Remotely Triggered Hybrid Nanostructures for Next-Generation Brain Cancer Theranostics”. ACS Biomaterials Science & Engineering. 2019;6(1):758-.

Robinson TM, Hutmacher DW, Dalton PD. The Next Frontier in Melt Electrospinning: Taming the Jet. Advanced Functional Materials. 2019;29(44).

Ramirez MS, Tran-Gia J, Gbureck U, Kosmala A, Lassmann M. Quantification of the Trabecular Bone Volume Fraction with Dual Energy Quantitative CT to Calculate Patient-Specific Radionuclide S Values for Bone Marrow Dosimetry. European Journal of Nuclear Medicine and Molecular Imaging. 2019;46(SUPPL 1):S135-S6.

Roedel M, Tessmar J, Groll J, Gbureck U. Tough and Elastic alpha-Tricalcium Phosphate Cement Composites with Degradable PEG-Based Cross-Linker. Materials. 2019;12(1).

Berberich O, Blöhbaum J, Hölscher-Doht S, Meffert RH, Teßmar J, Blunk T, et al. Catechol-modified poly(oxazoline)s with tunable degradability facilitate cell invasion and lateral cartilage integration. Journal of Industrial and Engineering Chemistry. 2019;80:757-69.

Liebscher J, Teßmar J, Groll J. In Situ Polymer Analogue Generation of Azlactone Functions at Poly(oxazoline)s for Peptide Conjugation. Macromolecular Chemistry and Physics. 2019;221(1).

Malda J, Groll J. Building Blocks for Biofabricated Models. Advanced Healthcare Materials. 2019;8:1900326.

S. Bertlein, D. Hikimoto, G. Hochleitner, J. Hummer, T. Jungst, M. Matsusaki, M. Akashi and J. Groll (2018). “Development of Endothelial Cell Networks in 3D Tissues by Combination of Melt Electrospinning Writing with Cell-Accumulation Technology.” Small 14(2).

T. Bock, V. Schill, M. Krahnke, A. F. Steinert, J. Tessmar, T. Blunk and J. Groll (2018). “TGF-beta1-Modified Hyaluronic Acid/Poly(glycidol) Hydrogels for Chondrogenic Differentiation of Human Mesenchymal Stromal Cells.” Macromol Biosci 18(7): e1700390.

A. V. Boehm, S. Meininger, A. Tesch, U. Gbureck and F. A. Muller (2018). “The Mechanical Properties of Biocompatible Apatite Bone Cement Reinforced with Chemically Activated Carbon Fibers.” Materials (Basel) 11(2).

G. Bohm, J. Groll, K. H. Heffels, N. Heussen, P. Ink, H. P. Alizai, U. P. Neumann, R. Schnabel and U. Mirastschijski (2018). “Influence of MMP inhibitor GM6001 loading of fibre coated polypropylene meshes on wound healing: Implications for hernia repair.” J Biomater Appl 32(10): 1343-1359.

T. Bruckner, K. Hurle, A. Stengele, J. Groll and U. Gbureck (2018). “Mechanical activation and cement formation of trimagnesium phosphate.” Journal of the American Ceramic Society 101(5): 1830-1834.

M. Castilho, G. Hochleitner, W. Wilson, B. van Rietbergen, P. D. Dalton, J. Groll, J. Malda and K. Ito (2018). “Mechanical behavior of a soft hydrogel reinforced with three-dimensional printed microfibre scaffolds.” Sci Rep 8(1): 1245.

M. Castilho, A. van Mil, M. Maher, C. H. G. Metz, G. Hochleitner, J. Groll, P. A. Doevendans, K. Ito, J. P. G. Sluijter and J. Malda (2018). “Melt Electrowriting Allows Tailored Microstructural and Mechanical Design of Scaffolds to Advance Functional Human Myocardial Tissue Formation.” Advanced Functional Materials 28(40).

M. de Ruijter, A. Hrynevich, J. N. Haigh, G. Hochleitner, M. Castilho, J. Groll, J. Malda and P. D. Dalton (2018). “Out-of-Plane 3D-Printed Microfibers Improve the Shear Properties of Hydrogel Composites.” Small 14(8).

S. Feineis, J. Lutz, L. Heffele, E. Endl, K. Albrecht and J. Groll (2018). “Thioether-Polyglycidol as Multivalent and Multifunctional Coating System for Gold Nanoparticles.” Adv Mater 30(8).

H. Hildebrandt, O. Paloheimo, E. Mantyla, S. Willman, S. Hakanen, K. Albrecht, J. Groll, M. Moller and M. Vihinen-Ranta (2018). “Reactive Self-Assembly and Specific Cellular Delivery of NCO-sP(EO-stat-PO)-Derived Nanogels.” Macromol Biosci 18(10): e1800094.

G. Hochleitner, F. Chen, C. Blum, P. D. Dalton, B. Amsden and J. Groll (2018). “Melt electrowriting below the critical translation speed to fabricate crimped elastomer scaffolds with non-linear extension behaviour mimicking that of ligaments anhttps://doi.org/10.1016/j.actbio.2018.03.023d tendons.” Acta Biomater 72: 110-120.

G. Hochleitner, E. Fursattel, R. Giesa, J. Groll, H. W. Schmidt and P. D. Dalton (2018). “Melt Electrowriting of Thermoplastic Elastomers.” Macromol Rapid Commun 39(10): e1800055.

I. Holzmeister, M. Schamel, J. Groll, U. Gbureck and E. Vorndran (2018). “Artificial inorganic biohybrids: The functional combination of microorganisms and cells with inorganic materials.” Acta Biomater 74: 17-35.

R.E. Horch, A. Weigand, H. Wajant, J. Groll, A. R. Boccaccini and A. Arkudas (2018). “[Biofabrication: new approaches for tissue regeneration].” Handchir Mikrochir Plast Chir 50(2): 93-100.

A. Hrynevich, B. S. Elci, J. N. Haigh, R. McMaster, A. Youssef, C. Blum, T. Blunk, G. Hochleitner, J. Groll and P. D. Dalton (2018). “Dimension-Based Design of Melt Electrowritten Scaffolds.” Small 14(22): e1800232.

N. Huettner, T. R. Dargaville and A. Forget (2018). “Discovering Cell-Adhesion Peptides in Tissue Engineering: Beyond RGD.” Trends Biotechnol 36(4): 372-383.

K. Hurle, J. Weichhold, M. Brueckner, U. Gbureck, T. Brueckner and F. Goetz-Neunhoeffer (2018). “Hydration mechanism of a calcium phosphate cement modified with phytic acid.” Acta Biomater 80: 378-389.

B. Kanter, A. Vikman, T. Bruckner, M. Schamel, U. Gbureck and A. Ignatius (2018). “Bone regeneration capacity of magnesium phosphate cements in a large animal model.” Acta Biomater 69: 352-361.

S. Mandal, S. Meininger, U. Gbureck and B. Basu (2018). “3D powder printed tetracalcium phosphate scaffold with phytic acid binder: fabrication, microstructure and in situ X-Ray tomography analysis of compressive failure.” J Mater Sci Mater Med 29(3): 29.

E. McColl, J. Groll, T. Jungst and P. D. Dalton (2018). “Design and fabrication of melt electrowritten tubes using intuitive software.” Materials & Design 155: 46-58.

M. Meininger, S. Meininger, J. Groll, U. Gbureck and C. Moseke (2018). “Silver and copper addition enhances the antimicrobial activity of calcium hydroxide coatings on titanium.” J Mater Sci Mater Med 29(5): 61.

L. Moroni, T. Boland, J. A. Burdick, C. De Maria, B. Derby, G. Forgacs, J. Groll, Q. Li, J. Malda, V. A. Mironov, C. Mota, M. Nakamura, W. Shu, S. Takeuchi, T. B. F. Woodfield, T. Xu, J. J. Yoo and G. Vozzi (2018). “Biofabrication: A Guide to Technology and Terminology.” Trends Biotechnol 36(4): 384-402.

M. Nabiyouni, T. Bruckner, H. Zhou, U. Gbureck and S. B. Bhaduri (2018). “Magnesium-based bioceramics in orthopedic applications.” Acta Biomater 66: 23-43.

M. E. Ortiz-Soto, J. Ertl, J. Mut, J. Adelmann, T. A. Le, J. Shan, J. Tessmar, A. Schlosser, B. Engels and J. Seibel (2018). “Product-oriented chemical surface modification of a levansucrase (SacB) via an ene-type reaction.” Chem Sci 9(24): 5312-5321.

E. B. Petcu, R. Midha, E. McColl, A. Popa-Wagner, T. V. Chirila and P. D. Dalton (2018). “3D printing strategies for peripheral nerve regeneration.” Biofabrication 10(3): 032001.

B. Rentsch, A. Bernhardt, A. Henss, S. Ray, C. Rentsch, M. Schamel, U. Gbureck, M. Gelinsky, S. Rammelt and A. Lode (2018). “Trivalent chromium incorporated in a crystalline calcium phosphate matrix accelerates materials degradation and bone formation in vivo.” Acta Biomater 69: 332-341.

M. Rödel, K. Baumann, J. Groll and U. Gbureck (2018). “Simultaneous structuring and mineralization of silk fibroin scaffolds.” J Tissue Eng 9: 2041731418788509.

Rödel, M., S. Meininger, J. Groll and U. Gbureck (2018). Bioceramics as drug delivery systems. Fundamental Biomaterials: Ceramics. S. Thomas, P. Balakrishnan and M. S. Sreekala, Woodhead Publishing: 153-194.

M. Rödel, J. Tessmar, J. Groll and U. Gbureck (2018). “Highly flexible and degradable dual setting systems based on PEG-hydrogels and brushite cement.” Acta Biomater 79: 182-201.

F. Rudnitzki, S. Feineis, R. Rahmanzadeh, E. Endl, J. Lutz, J. Groll and G. Huttmann (2018). “siRNA release from gold nanoparticles by nanosecond pulsed laser irradiation and analysis of the involved temperature increase.” J Biophotonics 11(9): e201700329.

K. Stuckensen, A. Schwab, M. Knauer, E. Muinos-Lopez, F. Ehlicke, J. Reboredo, F. Granero-Molto, U. Gbureck, F. Prosper, H. Walles and J. Groll (2018). “Tissue Mimicry in Morphology and Composition Promotes Hierarchical Matrix Remodeling of Invading Stem Cells in Osteochondral and Meniscus Scaffolds.” Adv Mater 30(28): e1706754.

A. Van Mil, M. Castilho, M. Maher, C. H. Metz, R. G. C. Maas, G. Hochleitner, J. Groll, K. Ito, J. Malda and J. P. G. Sluijter (2018). “Engineering myocardial tissue in vitro using stretchable microfiber scaffolds and human iPSC-derived cardiomyocytes.” Cardiovascular Research 114: S112-S112.

S. Wang, P. D. Dalton and T. R. Dargaville (2018). “Spatial Patterning of Hydrogels via 3D Covalent Transfer Stamping from a Fugitive Ink.” Macromol Rapid Commun 39(4).

M. Weis, J. Shan, M. Kuhlmann, T. Jungst, J. Tessmar and J. Groll (2018). “Evaluation of Hydrogels Based on Oxidized Hyaluronic Acid for Bioprinting.” gels 4(82).

C. Wiegand, A. Volpel, A. Ewald, M. Remesch, J. Kuever, J. Bauer, S. Griesheim, C. Hauser, J. Thielmann, S. Tonndorf-Martini, B. W. Sigusch, J. Weisser, R. Wyrwa, P. Elsner, U. C. Hipler, M. Roth, C. Dewald, C. Ludecke-Beyer and J. Bossert (2018). “Critical physiological factors influencing the outcome of antimicrobial testing according to ISO 22196 / JIS Z 2801.” PLoS One 13(3): e0194339.

F. M. Wunner, M. L. Wille, T. G. Noonan, O. Bas, P. D. Dalton, E. M. De-Juan-Pardo and D. W. Hutmacher (2018). “Melt Electrospinning Writing of Highly Ordered Large Volume Scaffold Architectures.” Adv Mater 30(20): e1706570.

Z. S. Zhang, S. Y. Ye, U. Gbureck, J. E. Barralet and G. Merle (2018). “Cavitation Mediated 3D Microstructured Architectures from Nanocarbon.” Advanced Functional Materials 28(19).

I. Zilkowski, I. Theodorou, K. Albrecht, F. Duconge and J. Groll (2018). “Subtle changes in network composition impact the biodistribution and tumor accumulation of nanogels.” Chem Commun (Camb) 54(83): 11777-11780.

2017

B. Baumann, T. Jungst, S. Stichler, S. Feineis, O. Wiltschka, M. Kuhlmann, M. Linden and J. Groll (2017). “Control of Nanoparticle Release Kinetics from 3D Printed Hydrogel Scaffolds.” Angew Chem Int Ed Engl 56(16): 4623-4628.

A. Bernhardt, M. Schamel, U. Gbureck and M. Gelinsky (2017). “Osteoclastic differentiation and resorption is modulated by bioactive metal ions Co2+, Cu2+ and Cr3+ incorporated into calcium phosphate bone cements.” Plos One 12(8).

S. Bertlein, G. Brown, K. S. Lim, T. Jungst, T. Boeck, T. Blunk, J. Tessmar, G. J. Hooper, T. B. F. Woodfield and J. Groll (2017). “Thiol-Ene Clickable Gelatin: A Platform Bioink for Multiple 3D Biofabrication Technologies.” Adv Mater.

C. Blum,  T. Bruckner, A. Ewald, A. Ignatius and U. Gbureck (2017). “Mg:Ca ratio as regulating factor for osteoclastic in vitro resorption of struvite biocements.” Mater. Sci. & Eng. C 73: 111-119.

G. H. Bode, G. Coue, C. Freese, K. E. Pickl, M. Sanchez-Purra, B. Albaiges, S. Borros, E. C. van Winden, L. A. Tziveleka, Z. Sideratou, J. F. J. Engbersen, S. Singh, K. Albrecht, J. Groll, M. Moller, A. J. G. Potgens, C. Schmitz, E. Frohlich, C. Grandfils, F. M. Sinner, C. J. Kirkpatrick, H. W. M. Steinbusch, H. G. Frank, R. E. Unger and P. Martinez-Martinez (2017). “An in vitro and in vivo study of peptide-functionalized nanoparticles for brain targeting: The importance of selective blood-brain barrier uptake.” Nanomedicine 13(3): 1289-1300.

R. A. V. Bolanos, S. M. Cokelaere, J. M. E. McDermott, K. E. M. Benders, U. Gbureck, S. G. M. Plomp, H. Weinans, J. Groll, P. R. van Weeren and J. Malda (2017). “The use of a cartilage decellularized matrix scaffold for the repair of osteochondral defects: the importance of long-term studies in a large animal model.” Osteoarthritis and cartilage 25(3): 413-420.

M. Castilho,  D. Feyen, M. Flandes-Iparraguirre, G. Hochleitner, J. Groll, P. A. F. Doevendans, T. Vermonden, K. Ito, J. P. G. Sluijter and J. Malda (2017). “Melt Electrospinning Writing of Poly-Hydroxymethylglycolide-co-epsilon-Caprolactone-Based Scaffolds for Cardiac Tissue Engineering.” Adv Healthc Mater 6(18).

M. Castilho, J. Rodrigues, E. Vorndran, U. Gbureck, C. Quental, J. Folgado and P. R. Fernandes (2017). “Computational design and fabrication of a novel bioresorbable cage for tibial tuberosity advancement application.” Journal of the Mechanical Behavior of Biomedical Materials 65: 344-355.

S. C. Cox, S. Patel, U. Gbureck, A. J. Wright and L. M. Grover (2017). “A cohesive premixed monetite biocement.” Journal of the American Ceramic Society 100(3): 1241-1249.

P. D. Dalton, (2017). “Melt electrowriting with additive manufacturing principles.” Current Opinion in Biomedical Engineering 2: 49-57.

J. Drager, J. L. Ramirez-GarciaLuna, A. Kumar, U. Gbureck, E. J. Harvey and J. E. Barralet (2017). “Hypoxia Biomimicry to Enhance Monetite Bone Defect Repair.” Tissue engineering. Part A.

M. Glogger, S. Stichler, I. Subota, S. Bertlein, M. C. Spindler, J. Teßmar, J. Groll, M. Engstler and S. F. Fenz (2017). “Live-cell super-resolution imaging of intrinsically fast moving flagellates.” Journal of Physics D: Applied Physics 50(7).

J. N. Haigh, T. R. Dargaville and P. D. Dalton (2017). “Additive manufacturing with polypropylene microfibers.” Materials Science and Engineering: C 77: 883-887.

F. Hansske, O. Bas, C. Vaquette, G. Hochleitner, J. Groll, E. Kemnitz, D. W. Hutmacher and H. G. Boerner (2017). “Via precise interface engineering towards bioinspired composites with improved 3D printing processability and mechanical properties.” Journal of Materials Chemistry B 5(25): 5037-5047.

A. Henss, M. Schamel, U. Gbureck, M. Gelinsky and A. Lode (2017). “Data on TOF-SIMS analysis of Cu2+, Co2+ and Cr3+ doped calcium phosphate cements.” Data in brief 13: 353-355.

G. Hochleitner, M. Kessler, M. Schmitz, A. R. Boccaccini, J. Teßmar and J. Groll (2017). “Melt electrospinning writing of defined scaffolds using polylactide-poly(ethylene glycol) blends with 45S5 bioactive glass particles.” Materials Letters 205: 257-260.

A. Janikowska, J. Matuszak, S. Lyer, E. Schreiber, H. Unterweger, J. Zaloga, J. Groll, C. Alexiou and I. Cicha (2017). “A novel human artery model to assess the magnetic accumulation of SPIONs under flow conditions.” Scientific Reports 7.

T. Lorson, S. Jaksch, M. M. Lubtow, T. Jungst, J. Groll, T. Luhmann and R. Luxenhofer (2017). “A Thermogelling Supramolecular Hydrogel with Sponge-Like Morphology as a Cytocompatible Bioink.” Biomacromolecules.

T. C. Lühmann, L. Meinel, J. Groll and P. D. Dalton (2017). 4.29 Electrospun Fibers for Drug Delivery Comprehensive Biomaterials II. P. Ducheyne. Oxford, Elsevier. 4: 527-548.

L. C. Martine, B. M. Holzapfel, J. A. McGovern, F. Wagner, V. M. Quent, P. Hesami, F. M. Wunner, C. Vaquette, E. M. De-Juan-Pardo, T. D. Brown, B. Nowlan, D. J. Wu, C. O. Hutmacher, D. Moi, T. Oussenko, E. Piccinini, P. W. Zandstra, R. Mazzieri, J. P. Levesque, P. D. Dalton, A. V. Taubenberger and D. W. Hutmacher (2017). “Engineering a humanized bone organ model in mice to study bone metastases.” Nat Protoc 12(4): 639-663.

S. Meininger, C. Blum, M. Schamel, J. E. Barralet, A. Ignatius and U. Gbureck (2017). “Phytic acid as alternative setting retarder enhanced biological performance of dicalcium phosphate cement in vitro.” Sci. Rep. 7.

M. L. Muerza-Cascante, A. Shokoohmand, K. Khosrotehrani, D. Haylock, P. D. Dalton, D. W. Hutmacher and D. Loessner (2017). “Endosteal-like extracellular matrix expression on melt electrospun written scaffolds.” Acta Biomater 52: 145-158.

N. Paxton, W. Smolan, T. Böck, F. P. Melchels, J. Groll and T. Juengst (2017). “Proposal to Assess Printability of Bioinks for Extrusion-Based Bioprinting and Evaluation of Rheological Properties Governing Bioprintability” Biofabrication 

A. Sancho, Vandersmissen, I., Craps, S., Luttun, A., Groll, J. (2017). “A new strategy to measure intercellular adhesion forces in mature cell-cell contacts.” Scientific Reports 7.

M. Schamel, J. E. Barralet, M. Gelinsky, J. Groll and U. Gbureck (2017). “Intrinsic 3D Prestressing: A New Route for Increasing Strength and Improving Toughness of Hybrid Inorganic Biocements.” Advanced Materials

M. Schamel, J. E. Barralet, J. Groll and U. Gbureck (2017). “In vitro ion adsorption and cytocompatibility of dicalcium phosphate ceramics.” Biomaterials research 21: 10-10.

M. Schamel, A. Bernhardt, M. Quade, C. Wuerkner, U. Gbureck, C. Moseke, M. Gelinsky and A. Lode (2017). “Cu2+, Co2+ and Cr3+ doping of a calcium phosphate cement influences materials properties and response of human mesenchymal stromal cells.” Materials Science & Engineering C-Materials for Biological Applications 73: 99-110.

M. Schamel, J. Groll and U. Gbureck (2017). “Simultaneous formation and mineralization of star-P(EO-stat-PO) hydrogels.” Materials science & engineering. C, Materials for biological applications 75: 471-477.

M. Schumacher, L. Reither, J. Thomas, M. Kampschulte, U. Gbureck, A. Lode and M. Gelinsky (2017). “Calcium phosphate bone cement/mesoporous bioactive glass composites for controlled growth factor delivery.” Biomaterials Science.

S. Stichler, S. Bertlein, J. Tessmar, T. Jüngst and J. Groll (2017). “Thiol-ene Cross-Linkable Hydrogels as Bioinks for Biofabrication.” Macromolecular Symposia 372(1): 102-107.

S. Stichler, T. Bock, N. C. Paxton, S. Bertlein, R. Levato, V. Schill, W. Smolan, J. Malda, J. Tessmar, T. Blunk and J. Groll (2017). “Double printing of hyaluronic acid / poly(glycidol) hybrid hydrogels with poly(epsilon-caprolactone) for MSC chondrogenesis.” Biofabrication.

S. Stichler, T. Jungst, M. Schamel, I. Zilkowski, M. Kuhlmann, T. Bock, T. Blunk, J. Tessmar and J. Groll (2017). “Thiol-ene Clickable Poly(glycidol) Hydrogels for Biofabrication.” Ann Biomed Eng 45(1): 273-285.

T. Tylek,  K. Schlegelmilch, A. Ewald, M. Rudert, F. Jakob and J. Groll (2017). “Cell communication modes and bidirectional mitochondrial exchange in direct and indirect macrophage/hMSC co-culture models.” BioNanoMaterials 18(3-4).

L. Wistlich, J. Kums, A. Rossi, K. Heffels, H. Wajant and J. Groll (2017). Multimodal Bioactivation of Hydrophilic Electrospun Nanofibers Enabels Simultaneous Tuning of Cell Adhesivity and Immunomodulatory Effects. Advanced Functional Materials.

L. Wistlich, A. Rucker, M. Schamel, A. C. Kubler, U. Gbureck and J. Groll (2017). “A Bone Glue with Sustained Adhesion under Wet Conditions.” Advanced Healthcare Materials 6(3).

F. M. Wunner, O. Bas, N. T. Saidy, P. D. Dalton, E. M. D.-J. Pardo and D. W. Hutmacher (2017). “Melt Electrospinning Writing of Three-dimensional Poly(epsilon-caprolactone) Scaffolds with Controllable Morphologies for Tissue Engineering Applications.” Jove-Journal of Visualized Experiments(130).

A. Youssef, S. J. Hollister and P. D. Dalton (2017). “Additive manufacturing of polymer melts for implantable medical devices and scaffolds.” Biofabrication 9(1): 012002.

H. Zazo, C. I. Colino, K. T. Warzecha, M. Hoss, U. Gbureck, C. Trautwein, F. Tacke, J. M. Lanao and M. Bartneck (2017). “Gold Nanocarriers for Macrophage-Targeted Therapy of Human Immunodeficiency Virus.” Macromolecular Bioscience 17(3).

2016

T. D. Brown, P. D. Dalton and D. W. Hutmacher (2016). “Melt electrospinning today: An opportune time for an emerging polymer process.” Progress in Polymer Science 56(Supplement C): 116-166.

T. Brueckner, M. Schamel, A. C. Kuebler, J. Groll and U. Gbureck (2016). “Novel bone wax based on poly(ethylene glycol)-calcium phosphate cement mixtures.” Acta Biomaterialia 33: 252-263.

F. Chen, G. Hochleitner, T. Woodfield, J. Groll, P. D. Dalton and B. G. Amsden (2016). “Additive Manufacturing of a Photo-Cross-Linkable Polymer via Direct Melt Electrospinning Writing for Producing High Strength Structures.” Biomacromolecules 17(1): 208-214.

C. Chintalapati, T. Keller, T. D. Mueller, V. Gorboulev, N. Schafer, I. Zilkowski, M. Veyhl-Wichmann, D. Geiger, J. Groll and H. Koepsell (2016). “Protein RS1 (RSC1A1) Downregulates the Exocytotic Pathway of Glucose Transporter SGLT1 at Low Intracellular Glucose via Inhibition of Ornithine Decarboxylase.” Mol Pharmacol 90(5): 508-521.

A. Cornelissen, M. Almalla, J. Schroeder, S. Mause, E. Liehn, N. Schaaps, J. Groll, N. Marx and F. Vogt (2016). “Vessel biofunctionalization to support endothelial regeneration: development of cRGD-loaded in-situ crosslinking 2-component hydrogels for endovascular trans-catheter application.” European Heart Journal 37: 880-880.

J. Groll, T. Boland, T. Blunk, J. A. Burdick, D. W. Cho, P. D. Dalton, B. Derby, G. Forgacs, Q. Li, V. A. Mironov, L. Moroni, M. Nakamura, W. Shu, S. Takeuchi, G. Vozzi, T. B. Woodfield, T. Xu, J. J. Yoo and J. Malda (2016). “Biofabrication: reappraising the definition of an evolving field.” Biofabrication 8(1): 013001.

J. N. Haigh, Y. M. Chuang, B. Farrugia, R. Hoogenboom, P. D. Dalton and T. R. Dargaville (2016). “Hierarchically Structured Porous Poly(2-oxazoline) Hydrogels.” Macromolecular Rapid Communications 37(1): 93-99.

G. Hochleitner, A. Youssef, A. Hrynevich, J. N. Haigh, T. Jungst, J. Groll and P. D. Dalton (2016). “Fibre pulsing during melt electrospinning writing.” BioNanoMaterials 17(3-4).

K. Hurle, T. Christel, U. Gbureck, C. Moseke, J. Neubauer and F. Goetz-Neunhoeffer (2016). “Reaction kinetics of dual setting alpha-tricalcium phosphate cements.” Journal of Materials Science-Materials in Medicine 27(1).

T. Jungst, W. Smolan, K. Schacht, T. Scheibel and J. Groll (2016). “Strategies and Molecular Design Criteria for 3D Printable Hydrogels.” Chem Rev 116(3): 1496-1539.

M. Kessler, E. Esser, J. Groll and J. Tessmar (2016). “Bilateral PLA/alginate membranes for the prevention of postsurgical adhesions.” J Biomed Mater Res B Appl Biomater 104(8): 1563-1570.

M. Kessler, J. Groll and J. Tessmar (2016). “Application of Linear and Branched Poly(Ethylene Glycol)-Poly(Lactide) Block Copolymers for the Preparation of Films and Solution Electrospun Meshes.” Macromol Biosci 16(3): 441-450.

A. Kumar, S. Mandal, S. Barui, R. Vasireddi, U. Gbureck, M. Gelinsky and B. Basu (2016). “Low temperature additive manufacturing of three dimensional scaffolds for bone-tissue engineering applications: Processing related challenges and property assessment.” Materials Science & Engineering R-Reports 103: III-39.

J. Lucas Aparicio, C. Rueda, A. Manchon, A. Ewald, U. Gbureck, M. Hamdan Alkhraisat, L. Blanco Jerez and E. Lopez Cabarcos (2016). “Effect of physicochemical properties of a cement based on silicocarnotite/calcium silicate on in vitro cell adhesion and in vivo cement degradation.” Biomedical Materials 11(4).

J. Malda and J. Groll (2016). “A Step Towards Clinical Translation of Biofabrication.” Trends Biotechnol 34(5): 356-357.

M. Meininger, T. Schmitz, T. Wagner, A. Ewald, U. Gbureck, J. Groll and C. Moseke (2016). “Real-time measurement of protein adsorption on electrophoretically deposited hydroxyapatite coatings and magnetron sputtered metallic films using the surface acoustic wave technique.” Materials Science & Engineering C-Materials for Biological Applications 61: 351-354.

2015

J. Groll. Mechanically Strong Microstructured Hydrogels Based on Reactive Star-Shaped Prepolymers. Macromolecular Symposia 2015; 358(1): 148–156

M. Kessler, J. Groll, J. Tessmar. Application of Linear and Branched Poly(Ethylene Glycol)-Poly(Lactide) Block Copolymers for the Preparation of Films and Solution Electrospun Meshes. Macromolecular Bioscience 2015, published online

A. Manchón, M.H. Alkhraisat, C. Rueda-Rodriguez, J.C. Prados-Frutos, J. Torres, J. Lucas-Aparicio, A. Ewald, U. Gbureck, E. López-Cabarcos. A new iron calcium phosphate material to improve the osteoconductive properties of a biodegradable ceramic: a study in rabbit calvaria. Biomedical Materials 2015, 10(5), published online

M. Kuhlmann, J. Groll. Dispersity control of linear poly(glycidyl ether)s by slow monomer addition. RSC Advances 2015; 5: 67323–67326

K. Zorn, E. Vorndran, U. Gbureck, F.A. Müller. Reinforcement of a magnesium-ammonium-phosphate cement with calcium phosphate whiskers. Journal of the American Ceramic Society 2015, published online

M. Kessler, E. Esser, J. Groll, J. Tessmar. Bilateral PLA/alginate membranes for the prevention of postsurgical adhesions. Journal of Biomedical Materials Research Part B: Applied Biomaterials 2015, published online

T. Führmann, M. Ghosh, A. Otero, B. Goss, T.R. Dargaville, D.D. Pearse, P.D. Dalton. Peptide-functionalized polymeric nanoparticles for active targeting of damaged tissue in animals with experimental autoimmune encephalomyelitis. Neuroscience Letters 2015, published online

E. DeSimone, K. Schacht, T. Jüngst, J. Groll, T. Scheibel. Biofabrication of 3D constructs: fabrication technologies and spider silk proteins as bioinks. Pure and Applied Chemistry 2015, published online

G. Hochleitner, T. Jüngst, T.D. Brown, K. Hahn, C. Moseke, F. Jakob, P.D. Dalton, J. Groll. Additive manufacturing of scaffolds with sub-micron filaments via melt electrospinning writing. Biofabrication 2015; 7, published online

T. Jüngst, M.L. Muerza-Cascante, T.D. Brown, M. Standfest, D.W. Hutmacher, J. Groll, P. Dalton. Melt Electrospinning onto Cylinders: Effects of Rotational Velocity and Collector Diameter on the Morphology of Tubular Structures. Polymer International 2015; published online

M.V. Beer, K. Hahn, S. Diederichs, M. Fabry, S. Singh, S.J. Spencer, J. Salber, M. Möller, A.G. Shard, J. Groll. Quantifying ligand-cell interactions and determination of the surface concentrations of ligands on hydrogel films: The measurement challenge. Biointerphases 2015; 10(2), published online

F. Topuz, J. Groll, M. Möller. Covalently layer-by-layer assembled homogeneous nanolayers with switchable wettability. Polymer Chemistry 2015; published online

M. Geffers, J. Groll, U. Gbureck. Reinforcement Strategies for Load-Bearing Calcium Phosphate Biocements. Materials 2015; published online

R. Hennig, K. Pollinger, J. Tessmar, A. Goepferich. Multivalent targeting of AT1 receptors with angiotensin II-functionalized nanoparticles. Journal of Drug Targeting 2015; published online

Z. Sheikh, M. Geffers, T. Christel, J. Barralet, U. Gbureck. Chelate setting of alkali ion substituted calcium phosphates. Ceramics International 2015; published online

J. Visser, F.P.W. Melchels, J.E. Jeon, E.M. van Bussel, L.S. Kimpton, H.M. Byrne, W.J.A. Dhert, P.D. Dalton, D.W. Hutmacher, J.Malda. Reinforcement of hydrogels using three-dimensionally printed microfibres. Nature Communications 2015; 6, published online

T. Simon-Yarza, A. Rossi, K.H. Heffels, F. Prosper, J. Groll, M.J. Blanco-Prieto. Polymeric electrospun scaffolds: Neuregulin Encapsulation and biocompatibility studies in a model of myocardial ischemia. Tissue Engineering Part A 2015; published online

M. Schmitz, M. Kuhlmann, O. Reimann, C.P.R. Hackenberger, J. Groll. Side Chain Cysteine Functionalized Poly(2-oxazoline)s for Multiple Peptide Conjugation by Native Chemical Ligation. Biomacromolecules 2015; published online

E. Vorndran, C. Moseke, U. Gbureck. 3D printing of ceramic implants. MRS Bulletin 2015; 40(2): 127-136

L. Macrí-Pellizzeri, B. Pelacho, A. Sancho, O. Iglesias-García, A.M. Simón-Yarza, M. Soriano-Navarro, S. González-Granero, J.M. García-Verdugo, E.M. De-Juan-Pardo, F. Prosper. Substrate stiffness and composition specifically direct differentiation of induced pluripotent stem cells. Tissue Engineering Part A 2015; 21(9-10): 1633-1641

A. Manchón, M. Alkhraisat, C. Rueda-Rodriguez, J. Torres, J.C. Prados-Frutos, A. Ewald, U. Gbureck, J. Cabrejos-Azama, A. Rodriguez-González, E. López-Cabarcos. Silicon calcium phosphate ceramic as novel biomaterial to simulate the bone regenerative properties of autologous bone. Journal of Biomedical Materials Research Part A 2015; 103(2): 479-488

M. Kuhlmann, O. Reimann, C.P.R. Hackenberger, J. Groll. Cysteine-Functional Polymers via Thiol-ene Conjugation. Macromolecular Rapid Communications 2015; 36(5): 472-476

T. Christel, S. Christ, J.E. Barralet, J. Groll, U. Gbureck. Chelate Bonding Mechanism in a Novel Magnesium Phosphate Bone Cement. Journal of the American Ceramic Society 2015; 98(3): 694-697

K. Schacht, T. Jüngst, M. Schweinlin, A. Ewald, J. Groll, T. Scheibel. Biofabrication of Cell-Loaded 3D Spider Silk Constructs. Angewandte Chemie 2015; 54(9): 2816-2820

M. Castilho, J. Rodrigues, I. Pires, B. Gouveia, M. Pereira, C. Moseke, J. Groll, A. Ewald, E. Vorndran. Fabrication of individual alginate-TCP scaffolds for bone tissue engineering by means of powder printing. Biofabrication 2015; 7, published online

M. Geffers, J.E. Barralet, J. Groll, U. Gbureck. Dual-setting brushite-silica gel cements. Acta Biomaterialia 2015; 11: 467-476

S. Christ, M. Schnabel, E. Vorndran, J. Groll, U. Gbureck. Fiber reinforcement during 3D printing. Materials Letters 2015; 139: 165-168

M.L. Muerza-Cascante, D. Haylock, D.W. Hutmacher, P.D. Dalton. Melt Electrospinning and Its Technologization in Tissue Engineering. Tissue Engineering Part B: Reviews 2015; 21(2): 187-202

M. Geffers, U. Gbureck, C. Moseke, E. Vorndran: Organic/Inorganic Hybrid Nanoceramics Based on Sol-Gel Chemistry. Handbook of nanoceramic and nanocomposite coatings and materials, Elsevier 2015.

2014

T.D. Brown, F. Edin, N. Detta, A.D. Skelton, D.W. Hutmacher, P.D. Dalton. Melt electrospinning of poly(ε-caprolactone) scaffolds: Phenomenological observations associated with collection and direct writing. Materials Science & Engineering C 2014; 45: 698-708

S.N. Rath, A. Brandl, D. Hiller, A. Hoppe, U. Gbureck, R.E. Horch, A.R. Boccaccini, U. Kneser. Bioactive Copper-Doped Glass Scaffolds Can Stimulate Endothelial Cells in Co-Culture in Combination with Mesenchymal Stem Cells. Plos One 2014; published online

P. Schendzielorz, T. Schmitz, C. Moseke, U. Gbureck, K. Frölich, K. Rak, J. Groll, R. Hagen, A. Radeloff. Plasma-Assisted Hydrophilization of Cochlear Implant Electrode Array Surfaces Enables Adhesion of Neurotrophin-Secreting Cells. ORL-Journal for Oto-Rhino-Laryngology Head and Neck Surgery 2014; 76: 257-265

A. Kasten, T. Naser, K. Brüllhoff, J. Fiedler, P. Müller, M. Möller, J. Rychly, J. Groll, R.E. Brenner. Guidance of mesenchymal stem cells on fibronectin structured hydrogel films. Plos One 2014; published online

S. Flauder, U. Gbureck, F.A. Müller. Structure and mechanical properties of β-TCP scaffolds prepared by ice-templating with preset ice front velocities. Acta Biomaterialia 2014; 10(12): 5148-5155

G. Hochleitner, J.F. Hümmer, R. Luxenhofer, J. Groll. High definition fibrous poly(2-ethyl-2-oxazoline) scaffolds through melt electrospinning writing. Polymer 2014; 55(20): 5017-5023

T. Schmitz, F. Warmuth, E. Werner, C. Hertl, J. Groll, U. Gbureck, C. Moseke. Physical and chemical characterization of Ag-doped Ti coatings produced by magnetron sputtering of modular targets. Materials Science and Engineering C 2014; 44: 126-131

M. Hütten, A. Dhanasingh, R. Hessler, T. Stöver, K.H. Esser, M. Möller, T. Lenarz, C. Jolly, J. Groll, V. Scheper. In Vitro and In Vivo Evaluation of a Hydrogel Reservoir as a Continuous Drug Delivery System for Inner Ear Treatment. Plos One 2014; published online

A. Sancho, L. Vázquez, E.M. De-Juan-Pardo. Effect of cold storage on collagen-based hydrogels for the three-dimensional culture of adipose-derived stem cells. Biofabrication 2014; 6(3)

A.M. Greiner, P. Hoffmann, K. Bruellhoff, S. Jungbauer, J.P. Spatz, M. Moeller, R. Kemkemer, J. Groll. Stable Biochemically Micro-patterned Hydrogel Layers Control Specific Cell Adhesion and Allow Long Term Cyclic Tensile Strain Experiments. Macromolecular Bioscience 2014; 14(11):1547-1555

T. Christel, M. Geffers, U. Klammert, B. Nies, A. Höß, J. Groll, A.C. Kübler, U. Gbureck. Fabrication and cytocompatibility of spherical magnesium ammonium phosphate granules. Materials Science & Engineering C 2014; 42:130-136

B. Kanter, M. Geffers, A. Ignatius, Uwe Gbureck. Control of in vivo mineral bone cement degradation. Acta Biomaterialia 2014; 10(7):3279-3267

F. Tamimi, J. Torres, K. Al-Abedalla, E. Lopez-Cabarcos, M.H. Alkhraisat, D.C. Bassett, U. Gbureck, J.E. Barralet. Osseointegration of dental implants in 3D-printed synthetic onlay grafts customized according to bone metabolic activity in recipient site. Biomaterials 2014; 35(21): 5436-5445

V.A. Schulte, K. Hahn, A. Dhanasingh, K.H. Heffels, J. Groll. Hydrogel–fibre composites with independent control over cell adhesion to gel and fibres as an integral approach towards a biomimetic artificial ECM Biofabrication 2014; 6(2)

M. Castilho, M. Dias, E. Vorndran, U. Gbureck, P. Fernandes, I. Pires, B. Gouveia, H. Armés, E. Pires, J. Rodrigues. Application of a 3D printed customized implant for canine cruciate ligament treatment by tibial tuberosity advancement Biofabrication 2014; published online.

C. Hertl, L. Koll, T. Schmitz, E. Werner, U. Gbureck. Structural characterisation of oxygen diffusion hardened alpha-tantalum PVD-coatings on titanium. Materials Science & Engineering C 2014; 41(1):28-35

M.J. Kettel, K. Schäfer, J. Groll, M. Möller. Nanogels with high active ß-cyclodextrin content as physical coating system with sustained release properties. ACS Applied Materials & Interfaces 2014; 6(4): 2300-2311

D. Projahn, S. Simsekyilmaz, S. Singh, I. Kanzler, B.K. Kramp, M. Langer, A. Burlacu, J. Bernhagen, D. Klee, A. Zernecke, T.M. Hackeng, J. Groll, C. Weber, E.A. Liehn, R.R. Koenen. Controlled intramyocardial release of engineered chemokines by biodegradable hydrogels as a treatment approach of myocardial infarction. Journal of Cellular and Molecular Medicine 2014; 18(5): 790-800

P. Fernández-Robredo, A. Sancho, S. Johnen, S. Recalde, N. Gama, G. Thumann, J. Groll, A. García-Layana. Current Treatment Limitations in Age-Related Macular Degeneration and Future Approaches Based on Cell Therapy and Tissue Engineering. Journal of Ophthalmology 2014, published online

K. Stuckensen, A. Ewald, J. Groll, U. Gbureck. In situ formation of multilayer biocomposite with anisotropic crystal orientation. Materials Letters 2014; 120(1): 111-114.

M. Castilho, C. Moseke, A. Ewald, U. Gbureck, J. Groll, I. Pires, J. Tessmar, E. Vorndran. Direct 3D powder printing of biphasic calcium phosphate scaffolds for substitution of complex bone defects. Biofabrication 2014; 6(1), published online

C. Luschmann, J. Tessmar, S. Schoeberl, O. Strau, W. Luschmann, A. Goepferich. Self-Assembling Colloidal System for the Ocular Administration of Cyclosporine A. Cornea 2014; 33(1): 77-81

2013

J. Malda, J. Visser, F.P. Melchels, T. Jüngst, W.E. Hennink, W.J.A. Dhert, J. Groll, D.W. Hutmacher. 25th Anniversary Article: Engineering Hydrogels for Biofabrication. Advanced Materials 2013; 25(36): 5011-5028.

M. Bartneck, K.H. Heffels, M. Bovi, J. Groll, G. Zwadlo-Klarwasser. The role of substrate morphology for the cytokine release profile of immature human primary macrophages. Materials Science and Engineering C 2013; 33(8): 5109-5114.

D. Tanaka, D. Bünger, H. Hildebrandt, M. Möller, J. Groll. Unidirectional Control of Anisotropic Wetting through Surface Modification of PDMS Microstructures. Langmuir 2013; 29(40): 12331–12336.

E. Vorndran, M. Geffers, A. Ewald, M. Lemm, B. Nies, U. Gbureck. Ready-to-use injectable calcium phosphate bone cement paste as drug carrier. Acta Biomaterialia 2013; 9(12):9558–9567.

M. Castilho, M. Dias, U. Gbureck, J. Groll, P. Fernandes, I. Pires, B. Gouveia, J. Rodrigues, E. Vorndran. Fabrication of computationally designed scaffolds by low temperature 3D printing. Biofabrication 2013; 5, published online.

B.M. Holzapfel, J.C. Reichert, J.-T. Schantz, U. Gbureck, L. Rackwitz, U. Nöth, F. Jakob, M. Rudert, J. Groll, D.W. Hutmacher. How smart do biomaterials need to be? A translational science and clinical point of view. Advanced Drug Delivery Reviews 2013; 65(4): 581–603.

N. Mehrban, J. Bowen, E. Vorndran, U. Gbureck, L.M. Grover. Structural changes to resorbable calcium phosphate bioceramic aged in vitro. Colloids and Surfaces B: Biointerfaces 2013; 111: 469-478.

E. Esser, J.K.V. Tessmar. Preparation of well-defined calcium cross-linked alginate films for the prevention of surgical adhesions. Journal of Biomedical Materials Research B 2013; 101B(5): 826–839.

C. Neuerburg, S. Recknagel, J. Fiedler, J. Groll, M. Moeller, K. Bruellhoff, H. Reichel, A. Ignatius, R.E. Brenner. Ultrathin sP(EO-stat-PO) hydrogel coatings are biocompatible and preserve functionality of surface bound growth factors in vivo. Journal of Materials Science: Materials in Medicine 2013; 24(10):2417-2427.

F. Jakob, R. Ebert, A. Ignatius, T. Matsushita, Y. Watanabe, J. Groll, H. Walles. Bone tissue engineering in osteoporosis. Maturitas 2013; 75(2): 118-124.

M. Hoss, T. Saric, B. Denecke, G. Peinkofer, M. Bovi, J. Groll, K. Ko, J. Salber, M. Halbach, H.R. Schoeler, M. Zenke, S. Neuss. Expansion and Differentiation of Germline-Derived Pluripotent Stem Cells on Biomaterials. Tissue Engineering Part A 2013; 19(9-10): 1067-1080.

S. Singh, I. Zilkowski, A. Ewald, T. Maurell-Lopez, K. Albrecht, M. Moeller, J. Groll. Mild Oxidation of Thiofunctional Polymers to Cytocompatible and Stimuli-Sensitive Hydrogels and Nanogels. Macromolecular Bioscience 2013; 13(4): 470-482.

M.V. Beer, C. Rech, P. Gasteier, B. Sauerzapfe, J. Salber, A. Ewald, M. Moeller, L. Elling, J. Groll. The Next Step in Biomimetic Material Design: Poly-LacNAc-Mediated Reversible Exposure of Extra Cellular Matrix Components. Advanced Healthcare Materials 2013; 2(2): 306-311.

L.M. Grover, A.J. Wright, U. Gbureck, A. Bolarinwa, J. Song, Y. Liu, D.F. Farrar, G. Howling, J. Rose, J.E. Barralet. The effect of amorphous pyrophosphate on calcium phosphate cement resorption and bone generation. Biomaterials 2013; 34 : 6631-6637.

L.A. Strobel, N. Hild, D. Mohn, W. J. Stark, A. Hoppe, U. Gbureck, R. E. Horch, U. Kneser, A.R. Boccaccini. Novel strontium-doped bioactive glass nanoparticles enhance proliferation and osteogenic differentiation of human bone marrow stromal cells. J Nanoparticle Res 2013; 15:1780.

S. Wächter, C. Moseke, J. Groll, U. Gbureck. Emulsion synthesis of dicalcium phosphate particles for the preparation of calcium phosphate cements with improved compressive strengths and reduced setting times. Bionanomaterials 2013;14(1-2):81-87.

J. Schnieders, U. Gbureck, O. Germershaus, M. Kratz, D.B. Jones, T. Kissel. Ex vivo human trabecular bone model for biocompatibility evaluation of calcium phosphate composites modified with spray dried biodegradable microspheres. Advanced Healthcare Materials 2013; 2(10):1361-1369.

C. Wolf-Brandstetter, S. Roessler, S. Storch, U. Hempel, U. Gbureck, B. Nies, S. Bierbaum, D. Scharnweber. Physicochemical and cell biological characterization of PMMA bone cements modified with additives to increase bioactivity. J Biomed Mater Res B 2013; 101B: 599–609.

S. Singh, F. Topuz, K. Hahn, K. Albrecht, J. Groll. Einbau aktiver Proteine und lebender Zellen in redoxsensitive Hydrogele und Nanogele durch enzymatische Vernetzung. Angewandte Chemie 2013, 52(10): 3000–3003.

K. Harrass , R. Krüger, M. Möller, K. Albrecht, J. Groll. Mechanically strong hydrogels with reversible behaviour under cyclic compression with MPa loading. Soft Matter 2013; 9(10): 2869-2877

K. Zorn, D. Mitró, E. Vorndran, U. Gbureck, F.A. Müller. Hydrothermal synthesis of calcium-deficient hydroxyapatite whiskers and their thermal transformation to polycrystalline ß-tricalcium phosphate short fibers. Bioinspired, Biomimetic and Nanobiomaterials 2013; 2(1): 11-19

C. Moseke, M. Gelinsky, J. Groll, U. Gbureck. Chemical Characterization of hydroxyapatite obtained by wet chemistry in the presence of V, Co, and Cu ions. Materials Science and Engineering C 2013; 33(3): 1654-1661

C. Moseke, C. Lehmann, T. Schmitz, F. Reinert, J. Groll, U. Gbureck. Nanostructuring of Refractory Metal Surfaces by Electrochemical Oxidation: Nb and the Binary Systems Ti-Ta and Nb-Ta. Current Nanoscience 2013; 9(1): 132-138

T. Schmitz, C. Hertl, E. Werner, U. Gbureck, J. Groll, C. Moseke. Oxygen diffusion hardening of tantalum coatings on cp-titanium for biomedical applications. Surface & Coatings Technology 2013; 216: 46–51

R. Krüger, J.M. Seitz, A.Ewald, F.W. Bach, J. Groll. Strong and Tough Magnesium Wire Reinforced Phosphate Cement Composites for Load-Bearing Bone Replacement. Journal of the Mechanical Behavior of Biomedical Materials 2013; 20:36–44

S. Flauder, U. Gbureck, F.A. Müller. ß-TCP Scaffolds with an Interconnected and Aligned Porosity Fabricated via Ice-Templating. Key Engineering Materials 2013; 529-530: 129-132

F. Tamimi, P. Comeau, D. Le Nihouannen, Y.L. Zhang, D.C. Bassett, S. Khalili, U. Gbureck, S.D. Tran, S. Komarova, J.E. Barralet. Perfluorodecalin and bone regeneration. European Cells and Materials 2013: 25: 22-36

T. Christel, M. Kuhlmann, E. Vorndran, J. Groll, U. Gbureck. Dual setting α-tricalcium phosphate cements. Journal of Materials Science: Materials in Medicine 2013; 24(3): 573-581

2012

D. Buenger, F. Topuz, J. Groll. Hydrogels in sensing applications. Progress in Polymer Science 2012; 37(12): 1678–1719

T. Christel, M. Kuhlmann, E. Vorndran, J. Groll, U. Gbureck. Dual setting α-tricalcium phosphate cements. Journal of Materials Science: Materials in Medicine 2012, published online

M. Bartneck, H.A. Keul, M. Wambach, J. Bornemann, U. Gbureck, N. Chatain, S. Neuss, F. Tacke, J. Groll, G. Zwadlo-Klarwasser. Effects of nanoparticle surface-coupled peptides, functional endgroups, and charge on intracellular distribution and functionality of human primary reticuloendothelial cells. Nanomedicine: Nanotechnology, Biology and Medicine 2012; 8(8): 1282–1292

M. Bartneck, T. Ritz, H.A. Keul, M. Wambach, J. Bornemann, U. Gbureck, J. Ehling, T. Lammers, F. Heymann, N. Gassler, T. Lüdde, C. Trautwein, J. Groll, F. Tacke. Peptide-Functionalized Gold Nanorods Increase Liver Injury in Hepatitis. ACS Nano 2012; 6(10): 8767-8777

T. Luhmann, O. Germershaus, J. Groll, L. Meinel. Bone targeting for the treatment of osteoporosis. Journal Of Controlled Release 2012; 161(2): 198–213

M.J. Kettel, H. Hildebrandt, K. Schaefer, M. Moeller, J. Groll.Tenside-free preparation of nanogels with high functional β‑cyclodextrin content. ACS Nano 2012; 6(9): 8087–8093

C. Moseke, C. Bayer, E. Vorndran, J.E. Barralet, J. Groll, U. Gbureck. Low temperature fabrication of spherical brushite granules by cement paste emulsion. Journal of Materials Science: Materials in Medicine 2012; 23(11): 2631-2637

M. Kuhlmann, S. Singh, J. Groll. Controlled Ring-opening polymerization of substituted Episulfides for side-chain functional polysulfide-based amphiphiles. Macromolecular Rapid Communications 2012; 33(17): 1482−1486

A. Ewald, C. Kaeppel, E. Vorndran, C. Moseke, M. Gelinsky, U. Gbureck. The effect of Cu(II)-loaded brushite scaffolds on growth and activity of osteoblastic cells. Journal of Biomedical Materials Research Part A 2012; 100: 2392–2400

R. Krueger, J. Groll. Fiber reinforced calcium phosphate cements – on the way to degradable load bearing bone substitutes? Biomaterials 2012; 33(25): 5887-5900.

M. Bartneck, K.H. Heffels, Y. Pan, M. Bovi, G. Zwadlo-Klarwasser, J. Groll. Inducing healing-like human primary macrophage phenotypes by 3D hydrogel coated nanofibres, Biomaterials 2012; 33(16):4136-4146.

W. Herzlieb, K.M. Koehler, A. Ewald, N. Hofmann, U. Gbureck. Antimicrobial and physicochemical properties of experimental light curing composites with alkali-substituted calcium phosphate fillers, Dental Materials 2012; 28(6):597-603.

F. Topuz, A. Henke, W. Richtering, J. Groll. Magnesium ions and alginate do form hydrogels: a rheological study, Soft Matter 2012; 8(18): 4877-4881.

F. Rudnitzki, M. Bever, R. Rahmanzadeh, K. Brieger, E. Endl, J. Groll, G. Huttmann. Bleaching of plasmon-resonance absorption of gold nanorods decreases efficiency of cell destruction, Journal of Biomedical Optics 2012; 17(5): 058003.

M.V. Beer, C. Rech, S. Diederichs, K. Hahn, K. Bruellhoff, M. Moeller, L. Elling, J. Groll. A hydrogel-based versatile screening platform for specific biomolecular recognition in a well plate format, Analytical and Bioanalytical Chemistry 2012; 403(2): 517-526.

C. Moseke, F. Hage, E. Vorndran, U. Gbureck. TiO2 nanotube arrays deposited on Ti substrate by anodic oxidation and their potential as a long-term drug delivery system for antimicrobial agents, Applied Surface Science 2012; 258(14): 5399-5404.

F. Jakob, R. Ebert, M. Rudert, U. Noeth, H. Walles, D. Docheva, M. Schieker, L. Meinel, J. Groll. In situ guided tissue regeneration in musculoskeletal diseases and aging Implementing pathology into tailored tissue engineering strategies, Cell and Tissue Research 2012; 347(3): 725-735.

J. Groll, K. Mullen, A. Walther. Macromolekulare Chemie 2011, Nachrichten aus der Chemie 2012; 60(3): 332-345.

J. Geistlinger, W. Du, J. Groll, F. Liu, J. Hoegel, K.J. Foehrl, A. Pasquarelli, M. Schneider: P2RX7 genotype association in severe sepsis identified by a novel multi-individual array for rapid screening and replication of risk SNPs. Clinica Chimica Acta 2012; 413(1-2): 39-47.

A. Dhanasingh, J. Groll: Polysaccharide based covalently linked multi-membrane hydrogels. Soft matter 2012; 8(5): 1643-1647.

J.Y.S. Yoon, H. Deyhle, U. Gbureck, E. Vorndran, F. Beckmann, B. Mueller. Three-dimensional morphology and mechanics of bone scaffolds fabricated by rapid prototyping, International Journal of Materials Research 2012; 103(2): 200-206.

A. Ewald, B. Lochner, U. Gbureck, J. Groll, R. Krüger. Structural optimization of macroporous magnesium phosphate scaffolds and their cytocompatibility, Key Engineering Materials 2012; 493-494: 813-819.

E. Vorndran, N. Spohn, B. Nies, S. Rössler, S. Storch, U. Gbureck: Mechanical properties and drug release behaviour of bioactivated PMMA-cements, Journal of Biomaterials Applications 2012; 26(5): 581-594.

C. Moseke, U. Gbureck: Tetracalcium phosphate-based dental cements. Calcium Phosphate: Structure, Synthesis, Properties, and Applications, Nova Science Publishers 2012.

J. Groll, M. Moeller: Surface Passivation for Single Molecule Detection. Encyclopedia of Biophysics, Springer 2012.

2011

J. Schnieders, U. Gbureck, E. Vorndran, M. Schossig, T. Kissel. The effect of porosity on drug release kinetics from vancomycin microsphere/calcium phosphate cement composites, JBMR B 2011; 99B(2): 391-398.

N. Mehrban, J. Z. Paxton, J. Bowen, A. Bolarinwa, E. Vorndran, U. Gbureck, L. M. Grover. Comparing physicochemical properties of printed and hand cast biocements designed for ligament replacement, Advances in Applied Ceramics 2011, 110: 162-167.

F. Tamini, D. Le Nihouannen, D.C. Bassett, S. Ibasco, U. Gbureck, J.C. Knowles, A.J. Wright, S. Komarova, J.E. Barralet: Biocompatibility of magnesium phosphate minerals and their stability under physiological conditions, Acta Biomaterialia 2011; 7: 2678-2685.

U. Klammert, A. Ignatius, U. Wolfram, T. Reuther, U. Gbureck: In vivo degradation of low temperature calcium and magnesium phosphate ceramics in a heterotopic model, Acta Biomaterialia, 2011; 7: 3469-3475.

Torres J, Tamimi F, Alkhraisat M, Prados-Frutos JC, Rastikerdar E, Gbureck U, Barralet JE, López-Cabarcos E. Vertical bone augmentation with 3D-synthetic monetite blocks in the rabbit calvaria, J Clin Periodont 2011; 38:1147-53.

Tan YN, Patel S, Gbureck U, Grover LM. Controlling degradation in calcium phosphate cements. Adv Appl Ceram 2011; 110: 457-463.

Stuckensen K, Gbureck U. Biphasic layered scaffolds with anisotropic mineralization behavior for osteochondral tissue replacement. Tissue Engineering Part A 2011; 17: 570-571.

Hill PJ, Stritzker J, Scadeng M, Geissinger U, Haddad D, Basse-Lüsebrink TC., Gbureck U, Jakob P, Szalay AA. Magnetic Resonance Imaging of Tumors Colonized with Bacterial Ferritin-Expressing Escherichia coli. PLoS ONE 2011; 6(10): e25409. doi:10.1371/journal.pone.0025409

E. Vorndran, K. Wunder, C. Moseke, I. Biermann, F. A. Müller, K. Zorn, U. Gbureck: Hydraulic setting Mg3(PO4)2 powders for 3D printing technology, Adv Appl Ceram 2011; 110: 476-481.

C. Moseke, U. Gbureck, P. Elter, P. Drechsler, A. Zoll, R. Thull, A. Ewald. Hard implant coatings with antimicrobial properties. Journal of Materials Science: Materials in Medicine, 22(12), 2711-2720 (2011)

A. Ewald, D. Hösel, S. Patel, L.M. Grover, J.E. Barralet, U. Gbureck. Silver-doped calcium phosphate cements with antimicrobial activity. Acta biomaterialia, 7(11), 4064-4070 (2011)

R. Krüger, D. Joklitschke; U. Gbureck; A. Ewald. Development and Cytocompatibility Testing of Trimagnesium Phosphate and Struvite Foams. Tissue Eng A, 17(3-4), 562 (2011)

E. Vorndran, A. Ewald, F.A. Müller, K. Zorn, A. Kufner, U. Gbureck. Formation and properties of magnesium-ammonium-phosphate hexahydrate biocements in the Ca-Mg-PO(4) system. J Mater Sci Mater Med. 22(3), 429-436 (2011)

C. Moseke, V. Saratsis, U. Gbureck, Injectability and mechanical properties of magnesium phosphate cements. Journal of Materials Science: Materials in Medicine, Vol. 22, No. 12, 2011, 2591-2598

J. Groll. Control of nanofibre surface chemistry for biomaterials and tissue engineering. Tissue Eng A, 17(3-4), 545-545 (2011)

Y. Hijikata, S. Horike, D. Tanaka, J. Groll, M. Mizuno, J. Kim, M. Takatade, S. Kitagawa: Differences of crystal structure and dynamics between a soft porous nanocrystal and a bulk crystal. Chem Commun 2011, 47, 7632-7634.

G. Boehm, Y. Ushakova, H.P. Alizai, T. Braunschweig, C. Lente, K.-H. Heffels, J. Groll, U.P. Neumann, K. Junge: Biocompatibility of PLGA / sP(EO-stat-PO)-coated mesh surfaces under constant shearing stress. European Surgical Research 2011, 47, 118-129.

S. Sinn, M. Eichler, L. Müller, D. Bünger, J. Groll, F. K. Gehring, F. Rupp, J. Geis-Gerstorfer, G. Ziemer, H. P. Wendel: NCO-sP(EO-stat-PO) coatings on gold sensors – a QCM study of hemocompatibility. Sensors 2011, 11(5), 5253-5269.

D. Grafahrend, K.-H. Heffels, M.V. Beer, P. Gasteier, M. Moeller, G. Boehm, P.D. Dalton, J. Groll: Degradable polyester scaffolds with controlled surface chemistry combining minimal protein adsorption with specific bioactivation. Nature Materials 2011, 10, 67-73.

R. Luxenhofer, J. Groll: Macromolekulare Chemie 2010. Nachrichten aus der Chemie 2011, 59(3), 324-334.

J. Fiedler, J. Groll, E. Engelhardt, P. Gasteier, C. Dahmen, H. Kessler, M. Moeller, R. E. Brenner: NCO-sP(EO-stat-PO) surface coatings preserve biochemical properties of RGD peptides. International Journal of Molecular Medicine 2011, 27(1), 139-145.

K. Albrecht, M. Moeller, J. Groll: Nano- and microgels through addition reactions of functional oligomers and polymers. Advances in Polymer Science 2011, 234, 65-93.

Ewald A, Helmschrott K, Knebl G, Mehrban N, Grover LM, Gbureck U. Effect of cold-setting calcium- and magnesium phosphate matrices on protein expression in osteoblastic cells. J Biomed Mater Res B Appl Biomater 2011; 96B(2): 326-332.

F. Topuz, D. Buenger, D. Tanaka, J. Groll: Hydrogels in Biosensing Applications. Comprehensive Biomaterials. Elsevier 2011.

K. Stuckensen, U. Gbureck, J. Groll: Production of materials having an anisotropic structure. WO2013083844A2

C. Jolly, R. Hessler, A. Dhanasingh, J. Groll: Hydrogel-filled drug delivery reservoirs. WO2010054308A1.

M. Moeller, J. Groll, M. Eberhardt: Novel biosensor system based on recognition induced birefringence (RIB). EP 08022585.7 – 1223.

H. Rong, P. Greiwe, J. Groll, C. Mohr, M. Glesius, M. Moeller: Silyl-functional linear prepolymers production and use thereof. WO2009024449A1.

H. Rong, P. Greiwe, J. Groll, C. Mohr, M. Glesius, M. Moeller: Production of multifunctional star prepolymers and mixtures of them for use in coatings, detergents and surface treatment products. WO2009024450A2.

Gbureck Uwe, Zubereitung für Magnesiumammoniumphosphat-Zemente, Deutsche Patentanmeldung 2008, DE 102008010210A1

Barralet Jake, Gbureck Uwe: Bioactive implants having bioactive substance; Patentanmeldung US 60/888,708 und PCT/CA2008/000248

H. Rong, S. Stumpe, M. Lueken, M. Weide, J. Groll, P. Greiwe: Cleaning compositions for treating hard surfaces. WO2008068236A1.

H. Rong, J. Groll, P. Greiwe, G. Schechner, C. Mohr, M. Möller: Multifunctional star-shaped prepolymers for use in coatings. WO 2007096056A1.

M. Möller, J. Groll, T. Ameringer, C. Mourran, H. Rong, S. Levi: Arrays of immobilized biomolecules on hydrogel-forming surfaces, production thereof, and use thereof. WO2005014695A1.

M. Möller, J. Groll, H. Rong, S. Levi: Microarrays of immobilized biomolecules, production and use thereof. WO2005014852A1.

Barralet Jake, Gbureck Uwe, Thull Roger, Improved Calcium Phosphate Bone Cements, WO002004103419A1