Publications
G. Hochleitner, A. Youssef, A. Hrynevich, J.N. Haigh, T. Jüngst, J. Groll, P.D. Dalton.
Fibre pulsing during melt electrospinning writing.
BioNanoMaterials 2016
S. Stichler, T. Jüngst, M. Schamel, I. Zilkowski, M. Kuhlmann, T. Böck, T. Blunk, J. Teßmar, J. Groll.
Thiol-ene Clickable Poly(glycidol) Hydrogels for Biofabrication.
Annals of Biomedical Engineering 2016; published online
M. Meininger, C. Wolf-Brandstetter, J. Zerweck, F. Wenninger, U. Gbureck, J. Groll, C. Moseke.
Electrochemically assisted deposition of strontium modified magnesium phosphate on titanium surfaces.
Materials Science and Engineering C 2016; 67: 65-71
A. Weigand, A.M. Boos, K. Tasbihi, J.P. Beier, P.D. Dalton, M. Schrauder, R.E. Horch, M.W. Beckmann, P.L. Strissel, R. Strick.
Selective isolation and characterization of primary cells from normal breast and tumors reveal plasticity of adipose derived
stem cells. Breast Cancer Research 2016; published online
J. Malda, J. Groll.
A Step Towards Clinical Translation of Biofabrication.
Trends in Biotechnology 2016; published online
A. Kumar, S. Mandala, S. Baruia, R. Vasireddia, U. Gbureck, M. Gelinsky, B. Basu.
Low temperature additive manufacturing of three dimensional scaffolds for
bone-tissue engineering applications: Processing related challenges
and property assessment.
Materials Science and Engineering R: Reports 2016; 103: 1-39
E. Vorndran, P. Lindberg.
In situ-immobilization of two model cyanobacterial strains in ceramic structures:
a new biohybrid material for photobioreactor applications.
Journal of Biotechnology 2016; published online
T. Brückner, M. Schamel, A.C. Kübler, J. Groll, U. Gbureck.
Novel bone wax based on poly(ethylene glycol)–calcium phosphate cement mixtures.
Acta Biomaterialia 2016; published online
T.D. Brown, P.D. Dalton, D.W. Hutmacher.
Melt Electrospinning Today: An Opportune Time for an Emerging Polymer Process.
Progress in Polymer Science 2016; published online
T. Scheibel, J. Groll, A.R. Boccaccini, T. Zehnder, T. Jüngst, K. Schacht.
Zellgewebe aus dem Drucker.
Nachrichten aus der Chemie 2016; 64(1): 13-16
M. Veyhl-Wichmann, A. Friedrich, A. Vernaleken, S. Singh, H. Kipp, V. Gorboulev, T. Keller, C. Chintalapati, R. Pipkorn,
M. Pastor-Anglada, J. Groll, H. Koepsell.
Phosphorylation of RS1 (RSC1A1) Steers Inhibition of Different Exocytotic Pathways for Glucose Transporter
SGLT1 and Nucleoside Transporter CNT1 and a RS1 Derived Peptide Inhibits Glucose Absorption.
Molecular Pharmacology 2016; 89(1): 118-132
J. Groll, T. Boland, T. Blunk, J.A. Burdick, D.W. Cho, P.D. Dalton, B. Derby, G. Forgacs, Q. Li, V.A. Mironov, L. Moroni,
M. Nakamura, W. Shu, S. Takeuchi, G. Vozzi, T.B.F. Woodfield, T. Xu, J.J. Yoo, J. Malda.
Biofabrication: reappraising the definition of an evolving field.
Biofabrication 2016, published online
M. Meininger, T. Schmitz, T. Wagner, A. Ewald, U. Gbureck, J. Groll, C. Moseke.
Real-time measurement of protein adsorption on electrophoretically deposited hydroxyapatite
coatings and magnetron sputtered metallic films using the surface acoustic wave technique.
Materials Science and Engineering C 2016; 61: 351-354
F. Chen, G. Hochleitner, T. Woodfield, J. Groll, P.D. Dalton, B.G. Amsden.
Additive Manufacturing of a Photo-Cross-Linkable Polymer via Direct Melt
Electrospinning Writing for Producing High Strength Structures.
Biomacromolecules 2016, published online
S. Meininger, S. Mandal, A. Kumar, J. Groll, B. Basub, U. Gbureck.
Strength reliability and in vitro degradation of three-dimensional
powder printed strontium-substituted magnesium phosphate scaffolds.
Acta Biomaterialia 2016, published online
K. Hurle, T. Christel, U. Gbureck, C. Moseke, J. Neubauer, F. Goetz-Neunhoeffer.
Reaction kinetics of dual setting α-tricalcium phosphate cements.
Journal of Materials Science: Materials in Medicine 2016, 27(1), published online
T. Jüngst, W. Smolan, K. Schacht, T. Scheibel, J. Groll.
Strategies and Molecular Design Criteria for 3D Printable Hydrogels.
Chemical Reviews 2016; 116(3): 1496-1539
J.N. Haigh, Y.M. Chuang, B. Farrugia, R. Hoogenboom, P.D. Dalton, T.R. Dargaville.
Hierarchically Structured Porous Poly(2-oxazoline) Hydrogels.
Macromolecular Rapid Communications 2016; 37(1): 93-99
J. Groll. Mechanically Strong Microstructured Hydrogels Based on Reactive Star-Shaped Prepolymers.
Macromolecular Symposia 2015; 358(1): 148–156
M. Kessler, J. Groll, J. Tessmar.
Application of Linear and Branched Poly(Ethylene Glycol)-Poly(Lactide) Block Copolymers
for the Preparation of Films and Solution Electrospun Meshes.
Macromolecular Bioscience 2015, published online
A. Manchón, M.H. Alkhraisat, C. Rueda-Rodriguez, J.C. Prados-Frutos, J. Torres, J. Lucas-Aparicio, A. Ewald,
U. Gbureck, E. López-Cabarcos.
A new iron calcium phosphate material to improve the osteoconductive properties of a biodegradable ceramic:
a study in rabbit calvaria.
Biomedical Materials 2015, 10(5), published online
M. Kuhlmann, J. Groll.
Dispersity control of linear poly(glycidyl ether)s by slow monomer addition.
RSC Advances 2015; 5: 67323–67326
K. Zorn, E. Vorndran, U. Gbureck, F.A. Müller.
Reinforcement of a magnesium-ammonium-phosphate cement with calcium phosphate whiskers.
Journal of the American Ceramic Society 2015, published online
M. Kessler, E. Esser, J. Groll, J. Tessmar.
Bilateral PLA/alginate membranes for the prevention of postsurgical adhesions.
Journal of Biomedical Materials Research Part B: Applied Biomaterials 2015, published online
T. Führmann, M. Ghosh, A. Otero, B. Goss, T.R. Dargaville, D.D. Pearse, P.D. Dalton.
Peptide-functionalized polymeric nanoparticles for active targeting of damaged
tissue in animals with experimental autoimmune encephalomyelitis.
Neuroscience Letters 2015, published online
E. DeSimone, K. Schacht, T. Jüngst, J. Groll, T. Scheibel.
Biofabrication of 3D constructs: fabrication technologies and spider silk proteins as bioinks.
Pure and Applied Chemistry 2015, published online
G. Hochleitner, T. Jüngst, T.D. Brown, K. Hahn, C. Moseke, F. Jakob, P.D. Dalton, J. Groll.
Additive manufacturing of scaffolds with sub-micron filaments via melt electrospinning writing.
Biofabrication 2015; 7, published online
T. Jüngst, M.L. Muerza-Cascante, T.D. Brown, M. Standfest, D.W. Hutmacher, J. Groll, P. Dalton.
Melt Electrospinning onto Cylinders: Effects of Rotational Velocity and Collector Diameter on
the Morphology of Tubular Structures.
Polymer International 2015; published online
M.V. Beer, K. Hahn, S. Diederichs, M. Fabry, S. Singh, S.J. Spencer, J. Salber, M. Möller, A.G. Shard, J. Groll.
Quantifying ligand-cell interactions and determination of the surface concentrations of ligands
on hydrogel films: The measurement challenge.
Biointerphases 2015; 10(2), published online
F. Topuz, J. Groll, M. Möller.
Covalently layer-by-layer assembled homogeneous nanolayers with switchable wettability.
Polymer Chemistry 2015; published online
M. Geffers, J. Groll, U. Gbureck.
Reinforcement Strategies for Load-Bearing Calcium Phosphate Biocements.
Materials 2015; published online
R. Hennig, K. Pollinger, J. Tessmar, A. Goepferich.
Multivalent targeting of AT1 receptors with angiotensin II-functionalized nanoparticles.
Journal of Drug Targeting 2015; published online
Z. Sheikh, M. Geffers, T. Christel, J. Barralet, U. Gbureck.
Chelate setting of alkali ion substituted calcium phosphates.
Ceramics International 2015; published online
J. Visser, F.P.W. Melchels, J.E. Jeon, E.M. van Bussel, L.S. Kimpton, H.M. Byrne, W.J.A. Dhert, P.D. Dalton, D.W. Hutmacher,
J.Malda. Reinforcement of hydrogels using three-dimensionally printed microfibres.
Nature Communications 2015; 6, published online
T. Simon-Yarza, A. Rossi, K.H. Heffels, F. Prosper, J. Groll, M.J. Blanco-Prieto.
Polymeric electrospun scaffolds: Neuregulin Encapsulation and biocompatibility studies in a model of myocardial ischemia.
Tissue Engineering Part A 2015; published online
M. Schmitz, M. Kuhlmann, O. Reimann, C.P.R. Hackenberger, J. Groll.
Side Chain Cysteine Functionalized Poly(2-oxazoline)s for Multiple Peptide Conjugation by Native Chemical Ligation.
Biomacromolecules 2015; published online
E. Vorndran, C. Moseke, U. Gbureck.
3D printing of ceramic implants.
MRS Bulletin 2015; 40(2): 127-136
L. Macrí-Pellizzeri, B. Pelacho, A. Sancho, O. Iglesias-García, A.M. Simón-Yarza, M. Soriano-Navarro,
S. González-Granero, J.M. García-Verdugo, E.M. De-Juan-Pardo, F. Prosper.
Substrate stiffness and composition specifically direct differentiation of induced pluripotent stem cells.
Tissue Engineering Part A 2015; 21(9-10): 1633-1641
A. Manchón, M. Alkhraisat, C. Rueda-Rodriguez, J. Torres, J.C. Prados-Frutos, A. Ewald, U. Gbureck, J. Cabrejos-Azama, A. Rodriguez-González, E. López-Cabarcos.
Silicon calcium phosphate ceramic as novel biomaterial to simulate the bone regenerative properties of autologous bone.
Journal of Biomedical Materials Research Part A 2015; 103(2): 479-488
M. Kuhlmann, O. Reimann, C.P.R. Hackenberger, J. Groll.
Cysteine-Functional Polymers via Thiol-ene Conjugation.
Macromolecular Rapid Communications 2015; 36(5): 472-476
T. Christel, S. Christ, J.E. Barralet, J. Groll, U. Gbureck.
Chelate Bonding Mechanism in a Novel Magnesium Phosphate Bone Cement.
Journal of the American Ceramic Society 2015; 98(3): 694-697
K. Schacht, T. Jüngst, M. Schweinlin, A. Ewald, J. Groll, T. Scheibel.
Biofabrication of Cell-Loaded 3D Spider Silk Constructs.
Angewandte Chemie 2015; 54(9): 2816-2820
M. Castilho, J. Rodrigues, I. Pires, B. Gouveia, M. Pereira, C. Moseke, J. Groll, A. Ewald, E. Vorndran.
Fabrication of individual alginate-TCP scaffolds for bone tissue engineering by means of powder printing.
Biofabrication 2015; 7, published online
M. Geffers, J.E. Barralet, J. Groll, U. Gbureck.
Dual-setting brushite-silica gel cements.
Acta Biomaterialia 2015; 11: 467-476
S. Christ, M. Schnabel, E. Vorndran, J. Groll, U. Gbureck.
Fiber reinforcement during 3D printing.
Materials Letters 2015; 139: 165-168
M.L. Muerza-Cascante, D. Haylock, D.W. Hutmacher, P.D. Dalton.
Melt Electrospinning and Its Technologization in Tissue Engineering.
Tissue Engineering Part B: Reviews 2015; 21(2): 187-202
T.D. Brown, F. Edin, N. Detta, A.D. Skelton, D.W. Hutmacher, P.D. Dalton.
Melt electrospinning of poly(ε-caprolactone) scaffolds: Phenomenological observations associated with collection and direct writing.
Materials Science & Engineering C 2014; 45: 698-708
S.N. Rath, A. Brandl, D. Hiller, A. Hoppe, U. Gbureck, R.E. Horch, A.R. Boccaccini, U. Kneser.
Bioactive Copper-Doped Glass Scaffolds Can Stimulate Endothelial Cells in Co-Culture in Combination with Mesenchymal Stem Cells.
Plos One 2014; published online
P. Schendzielorz, T. Schmitz, C. Moseke, U. Gbureck, K. Frölich, K. Rak, J. Groll, R. Hagen, A. Radeloff.
Plasma-Assisted Hydrophilization of Cochlear Implant Electrode Array Surfaces Enables Adhesion of Neurotrophin-Secreting Cells.
ORL-Journal for Oto-Rhino-Laryngology Head and Neck Surgery 2014; 76: 257-265
A. Kasten, T. Naser, K. Brüllhoff, J. Fiedler, P. Müller, M. Möller, J. Rychly, J. Groll, R.E. Brenner.
Guidance of mesenchymal stem cells on fibronectin structured hydrogel films.
Plos One 2014; published online
S. Flauder, U. Gbureck, F.A. Müller.
Structure and mechanical properties of β-TCP scaffolds prepared by ice-templating with preset ice front velocities.
Acta Biomaterialia 2014; 10(12): 5148-5155
G. Hochleitner, J.F. Hümmer, R. Luxenhofer, J. Groll.
High definition fibrous poly(2-ethyl-2-oxazoline) scaffolds through melt electrospinning writing.
Polymer 2014; 55(20): 5017-5023
T. Schmitz, F. Warmuth, E. Werner, C. Hertl, J. Groll, U. Gbureck, C. Moseke.
Physical and chemical characterization of Ag-doped Ti coatings produced by magnetron sputtering of modular targets.
Materials Science and Engineering C 2014; 44: 126-131
M. Hütten, A. Dhanasingh, R. Hessler, T. Stöver, K.H. Esser, M. Möller, T. Lenarz, C. Jolly, J. Groll, V. Scheper.
In Vitro and In Vivo Evaluation of a Hydrogel Reservoir as a Continuous Drug Delivery System for Inner Ear Treatment.
Plos One 2014; published online
A. Sancho, L. Vázquez, E.M. De-Juan-Pardo.
Effect of cold storage on collagen-based hydrogels for the three-dimensional
culture of adipose-derived stem cells.
Biofabrication 2014; 6(3)
A.M. Greiner, P. Hoffmann, K. Bruellhoff, S. Jungbauer, J.P. Spatz, M. Moeller, R. Kemkemer, J. Groll.
Stable Biochemically Micro-patterned Hydrogel Layers Control Specific Cell Adhesion and Allow Long Term Cyclic Tensile Strain Experiments.
Macromolecular Bioscience 2014; 14(11):1547-1555
T. Christel, M. Geffers, U. Klammert, B. Nies, A. Höß, J. Groll, A.C. Kübler, U. Gbureck.
Fabrication and cytocompatibility of spherical magnesium ammonium phosphate granules.
Materials Science & Engineering C 2014; 42:130-136
B. Kanter, M. Geffers, A. Ignatius, Uwe Gbureck.
Control of in vivo mineral bone cement degradation.
Acta Biomaterialia 2014; 10(7):3279-3267
F. Tamimi, J. Torres, K. Al-Abedalla, E. Lopez-Cabarcos, M.H. Alkhraisat, D.C. Bassett, U. Gbureck, J.E. Barralet.
Osseointegration of dental implants in 3D-printed synthetic onlay grafts customized according to bone metabolic activity in recipient site.
Biomaterials 2014; 35(21): 5436-5445
V.A. Schulte, K. Hahn, A. Dhanasingh, K.H. Heffels, J. Groll.
Hydrogel–fibre composites with independent control over cell adhesion to gel and fibres as an integral approach towards a biomimetic artificial ECM
Biofabrication 2014; 6(2)
M. Castilho, M. Dias, E. Vorndran, U. Gbureck, P. Fernandes, I. Pires, B. Gouveia, H. Armés, E. Pires, J. Rodrigues.
Application of a 3D printed customized implant for canine cruciate ligament treatment by tibial tuberosity advancement
Biofabrication 2014; published online.
C. Hertl, L. Koll, T. Schmitz, E. Werner, U. Gbureck.
Structural characterisation of oxygen diffusion hardened alpha-tantalum PVD-coatings on titanium.
Materials Science & Engineering C 2014; 41(1):28-35
M.J. Kettel, K. Schäfer, J. Groll, M. Möller.
Nanogels with high active ß-cyclodextrin content as physical coating system with sustained release properties.
ACS Applied Materials & Interfaces 2014; 6(4): 2300-2311
D. Projahn, S. Simsekyilmaz, S. Singh, I. Kanzler, B.K. Kramp, M. Langer, A. Burlacu, J. Bernhagen, D. Klee, A. Zernecke, T.M. Hackeng, J. Groll, C. Weber, E.A. Liehn, R.R. Koenen.
Controlled intramyocardial release of engineered chemokines by biodegradable hydrogels as a treatment approach of myocardial infarction.
Journal of Cellular and Molecular Medicine 2014; 18(5): 790-800
P. Fernández-Robredo, A. Sancho, S. Johnen, S. Recalde, N. Gama, G. Thumann, J. Groll, A. García-Layana.
Current Treatment Limitations in Age-Related Macular Degeneration and Future Approaches Based on Cell Therapy and Tissue Engineering.
Journal of Ophthalmology 2014, published online
K. Stuckensen, A. Ewald, J. Groll, U. Gbureck.
In situ formation of multilayer biocomposite with anisotropic crystal orientation.
Materials Letters 2014; 120(1): 111-114.
M. Castilho, C. Moseke, A. Ewald, U. Gbureck, J. Groll, I. Pires, J. Tessmar, E. Vorndran.
Direct 3D powder printing of biphasic calcium phosphate scaffolds for substitution of complex bone defects.
Biofabrication 2014; 6(1), published online
C. Luschmann, J. Tessmar, S. Schoeberl, O. Strau, W. Luschmann, A. Goepferich.
Self-Assembling Colloidal System for the Ocular Administration of Cyclosporine A.
Cornea 2014; 33(1): 77-81
Top
J. Malda, J. Visser, F.P. Melchels, T. Jüngst, W.E. Hennink, W.J.A. Dhert, J. Groll, D.W. Hutmacher.
25th Anniversary Article: Engineering Hydrogels for Biofabrication.
Advanced Materials 2013; 25(36): 5011-5028.
M. Bartneck, K.H. Heffels, M. Bovi, J. Groll, G. Zwadlo-Klarwasser.
The role of substrate morphology for the cytokine release profile of immature human primary macrophages.
Materials Science and Engineering C 2013; 33(8): 5109-5114.
D. Tanaka, D. Bünger, H. Hildebrandt, M. Möller, J. Groll.
Unidirectional Control of Anisotropic Wetting through Surface Modification of PDMS Microstructures.
Langmuir 2013; 29(40): 12331–12336.
E. Vorndran, M. Geffers, A. Ewald, M. Lemm, B. Nies, U. Gbureck.
Ready-to-use injectable calcium phosphate bone cement paste as drug carrier.
Acta Biomaterialia 2013; 9(12):9558–9567.
M. Castilho, M. Dias, U. Gbureck, J. Groll, P. Fernandes, I. Pires, B. Gouveia, J. Rodrigues, E. Vorndran.
Fabrication of computationally designed scaffolds by low temperature 3D printing.
Biofabrication 2013; 5, published online.
B.M. Holzapfel, J.C. Reichert, J.-T. Schantz, U. Gbureck, L. Rackwitz, U. Nöth, F. Jakob, M. Rudert, J. Groll, D.W. Hutmacher.
How smart do biomaterials need to be? A translational science and clinical point of view.
Advanced Drug Delivery Reviews 2013; 65(4): 581–603.
N. Mehrban, J. Bowen, E. Vorndran, U. Gbureck, L.M. Grover.
Structural changes to resorbable calcium phosphate bioceramic aged in vitro.
Colloids and Surfaces B: Biointerfaces 2013; 111: 469-478.
E. Esser, J.K.V. Tessmar.
Preparation of well-defined calcium cross-linked alginate films for the prevention of surgical adhesions.
Journal of Biomedical Materials Research B 2013; 101B(5): 826–839.
C. Neuerburg, S. Recknagel, J. Fiedler, J. Groll, M. Moeller, K. Bruellhoff, H. Reichel, A. Ignatius, R.E. Brenner.
Ultrathin sP(EO-stat-PO) hydrogel coatings are biocompatible and preserve functionality of surface bound growth factors in vivo.
Journal of Materials Science: Materials in Medicine 2013; 24(10):2417-2427.
F. Jakob, R. Ebert, A. Ignatius, T. Matsushita, Y. Watanabe, J. Groll, H. Walles. Bone tissue engineering in osteoporosis. Maturitas 2013; 75(2): 118-124.
M. Hoss, T. Saric, B. Denecke, G. Peinkofer, M. Bovi, J. Groll, K. Ko, J. Salber, M. Halbach, H.R. Schoeler, M. Zenke, S. Neuss.
Expansion and Differentiation of Germline-Derived Pluripotent Stem Cells on Biomaterials. Tissue Engineering Part A 2013; 19(9-10): 1067-1080.
S. Singh, I. Zilkowski, A. Ewald, T. Maurell-Lopez, K. Albrecht, M. Moeller, J. Groll. Mild
Oxidation of Thiofunctional Polymers to Cytocompatible and Stimuli-Sensitive Hydrogels and Nanogels. Macromolecular Bioscience 2013; 13(4): 470-482.
M.V. Beer, C. Rech, P. Gasteier, B. Sauerzapfe, J. Salber, A. Ewald, M. Moeller, L. Elling, J. Groll. The Next Step in Biomimetic Material Design: Poly-LacNAc-Mediated
Reversible Exposure of Extra Cellular Matrix Components. Advanced Healthcare Materials 2013; 2(2): 306-311.
L.M. Grover, A.J. Wright, U. Gbureck, A. Bolarinwa, J. Song, Y. Liu, D.F. Farrar, G. Howling, J. Rose, J.E. Barralet. The effect of amorphous
pyrophosphate on calcium phosphate cement resorption and bone generation.
Biomaterials 2013; 34 : 6631-6637.
L.A. Strobel, N. Hild, D. Mohn, W. J. Stark, A. Hoppe, U. Gbureck, R. E. Horch, U. Kneser, A.R. Boccaccini. Novel strontium-doped
bioactive glass nanoparticles enhance proliferation and osteogenic differentiation of human bone marrow stromal cells.
J Nanoparticle Res 2013; 15:1780.
S. Wächter, C. Moseke, J. Groll, U. Gbureck. Emulsion synthesis of dicalcium phosphate particles for the preparation of
calcium phosphate cements with improved compressive strengths and reduced setting times.
Bionanomaterials 2013;14(1-2):81-87.
J. Schnieders, U. Gbureck, O. Germershaus, M. Kratz, D.B. Jones, T. Kissel. Ex vivo human trabecular bone model for biocompatibility
evaluation of calcium phosphate composites modified with spray dried biodegradable microspheres.
Advanced Healthcare Materials 2013; 2(10):1361-1369.
C. Wolf-Brandstetter, S. Roessler, S. Storch, U. Hempel, U. Gbureck, B. Nies, S. Bierbaum, D. Scharnweber. Physicochemical and cell biological
characterization of PMMA bone cements modified with additives to increase bioactivity.
J Biomed Mater Res B 2013; 101B: 599–609.
S. Singh, F. Topuz, K. Hahn, K. Albrecht, J. Groll.
Einbau aktiver Proteine und lebender Zellen in redoxsensitive Hydrogele und Nanogele durch enzymatische Vernetzung.
Angewandte Chemie 2013, 52(10): 3000–3003.
K. Harrass , R. Krüger, M. Möller, K. Albrecht, J. Groll. Mechanically strong hydrogels with reversible behaviour under cyclic compression with MPa loading.
Soft Matter 2013; 9(10): 2869-2877
K. Zorn, D. Mitró, E. Vorndran, U. Gbureck, F.A. Müller. Hydrothermal synthesis of calcium-deficient hydroxyapatite
whiskers and their thermal transformation to polycrystalline ß-tricalcium phosphate short fibers.
Bioinspired, Biomimetic and Nanobiomaterials 2013; 2(1): 11-19
C. Moseke, M. Gelinsky, J. Groll, U. Gbureck. Chemical Characterization
of hydroxyapatite obtained by wet chemistry in the presence of V, Co,
and Cu ions. Materials Science and Engineering C 2013; 33(3): 1654-1661
C. Moseke, C. Lehmann, T. Schmitz, F. Reinert, J. Groll, U. Gbureck.
Nanostructuring of Refractory Metal Surfaces by Electrochemical Oxidation: Nb and the Binary Systems Ti-Ta and Nb-Ta. Current Nanoscience 2013; 9(1): 132-138
T. Schmitz, C. Hertl, E. Werner, U. Gbureck, J. Groll, C. Moseke.
Oxygen diffusion hardening of tantalum coatings on cp-titanium for
biomedical applications. Surface & Coatings Technology 2013; 216: 46–51
R. Krüger, J.M. Seitz, A.Ewald, F.W. Bach, J. Groll.
Strong and Tough Magnesium Wire Reinforced Phosphate Cement Composites for Load-Bearing Bone Replacement.
Journal of the Mechanical Behavior of Biomedical Materials 2013; 20:36–44
S. Flauder, U. Gbureck, F.A. Müller. ß-TCP Scaffolds with an Interconnected and Aligned Porosity Fabricated via Ice-Templating.
Key Engineering Materials 2013; 529-530: 129-132
F. Tamimi, P. Comeau, D. Le Nihouannen, Y.L. Zhang, D.C. Bassett, S. Khalili, U. Gbureck, S.D. Tran, S. Komarova, J.E. Barralet.
Perfluorodecalin and bone regeneration. European Cells and Materials 2013: 25: 22-36
T. Christel, M. Kuhlmann, E. Vorndran, J. Groll, U. Gbureck. Dual
setting α-tricalcium phosphate cements. Journal of Materials
Science: Materials in Medicine 2013; 24(3): 573-581
Top
D. Buenger, F. Topuz, J. Groll. Hydrogels in sensing applications.
Progress in Polymer Science 2012; 37(12): 1678–1719
T. Christel, M. Kuhlmann, E. Vorndran, J. Groll, U. Gbureck. Dual
setting α-tricalcium phosphate cements. Journal of Materials
Science: Materials in Medicine 2012, published online
M. Bartneck, H.A. Keul, M. Wambach, J.
Bornemann, U. Gbureck, N.
Chatain, S. Neuss, F. Tacke, J. Groll, G. Zwadlo-Klarwasser. Effects of
nanoparticle surface-coupled peptides, functional endgroups, and charge
on intracellular distribution and functionality of human primary
reticuloendothelial cells. Nanomedicine: Nanotechnology, Biology and
Medicine 2012; 8(8): 1282–1292
M. Bartneck, T. Ritz, H.A. Keul, M. Wambach, J. Bornemann, U. Gbureck,
J. Ehling, T. Lammers, F. Heymann, N. Gassler, T. Lüdde, C.
Trautwein, J. Groll, F. Tacke. Peptide-Functionalized Gold Nanorods
Increase Liver Injury in Hepatitis. ACS Nano 2012; 6(10): 8767-8777
T. Luhmann, O. Germershaus, J. Groll, L.
Meinel. Bone targeting for the treatment of osteoporosis. Journal Of
Controlled
Release 2012; 161(2): 198–213
M.J. Kettel, H. Hildebrandt, K. Schaefer, M.
Moeller, J. Groll.Tenside-free preparation of nanogels with high
functional
β‑cyclodextrin
content. ACS Nano 2012; 6(9): 8087–8093
C. Moseke, C. Bayer, E. Vorndran, J.E. Barralet, J. Groll, U. Gbureck.
Low temperature fabrication of spherical brushite granules by cement
paste emulsion. Journal of Materials Science: Materials in Medicine
2012; 23(11): 2631-2637
M. Kuhlmann, S. Singh, J. Groll. Controlled Ring-opening polymerization
of substituted Episulfides for side-chain
functional polysulfide-based amphiphiles.
Macromolecular Rapid Communications 2012; 33(17): 1482−1486
A. Ewald, C. Kaeppel, E. Vorndran, C. Moseke, M. Gelinsky, U. Gbureck.
The effect of Cu(II)-loaded brushite scaffolds on growth and activity
of osteoblastic cells. Journal of Biomedical Materials Research Part A
2012; 100: 2392–2400
R. Krueger, J. Groll. Fiber reinforced calcium phosphate cements
– on the way to degradable load bearing bone substitutes?
Biomaterials 2012; 33(25): 5887-5900.
M. Bartneck, K.H. Heffels, Y. Pan, M. Bovi, G. Zwadlo-Klarwasser, J.
Groll. Inducing healing-like human primary macrophage phenotypes by 3D
hydrogel coated nanofibres,
Biomaterials 2012; 33(16):4136-4146.
W. Herzlieb, K.M. Koehler, A. Ewald, N. Hofmann, U. Gbureck.
Antimicrobial and physicochemical properties of experimental light
curing composites with alkali-substituted calcium phosphate fillers,
Dental Materials 2012; 28(6):597-603.
F. Topuz, A. Henke, W. Richtering, J. Groll.
Magnesium ions and alginate do form hydrogels: a rheological study,
Soft Matter 2012; 8(18): 4877-4881.
F. Rudnitzki, M. Bever, R. Rahmanzadeh, K. Brieger, E. Endl, J. Groll, G. Huttmann.
Bleaching of plasmon-resonance absorption of gold nanorods decreases efficiency of cell destruction,
Journal of Biomedical Optics 2012; 17(5): 058003.
M.V. Beer, C. Rech, S. Diederichs, K. Hahn, K. Bruellhoff, M. Moeller,
L. Elling, J. Groll. A hydrogel-based versatile screening platform for
specific biomolecular recognition in a well plate format,
Analytical and Bioanalytical Chemistry 2012; 403(2): 517-526.
C. Moseke, F. Hage, E. Vorndran, U. Gbureck. TiO2
nanotube arrays deposited on Ti substrate by anodic oxidation and their
potential as a long-term
drug delivery system for antimicrobial agents, Applied Surface Science
2012; 258(14):
5399-5404.
F. Jakob, R. Ebert, M. Rudert, U. Noeth, H. Walles, D. Docheva, M.
Schieker, L. Meinel, J. Groll. In situ guided tissue regeneration in
musculoskeletal diseases and aging Implementing pathology into tailored
tissue engineering strategies, Cell and Tissue Research 2012; 347(3):
725-735.
J. Groll, K. Mullen, A. Walther. Macromolekulare Chemie 2011,
Nachrichten aus der Chemie 2012; 60(3): 332-345.
J. Geistlinger, W. Du, J. Groll, F. Liu, J. Hoegel, K.J. Foehrl, A.
Pasquarelli, M. Schneider: P2RX7 genotype association in severe sepsis
identified by a novel multi-individual array for rapid screening and
replication of
risk SNPs. Clinica Chimica Acta 2012; 413(1-2): 39-47.
A. Dhanasingh, J. Groll: Polysaccharide based covalently linked
multi-membrane hydrogels. Soft matter 2012; 8(5): 1643-1647.
J.Y.S. Yoon, H. Deyhle, U. Gbureck, E. Vorndran, F. Beckmann, B.
Mueller. Three-dimensional
morphology and mechanics of bone scaffolds fabricated by rapid
prototyping, International
Journal of Materials Research 2012; 103(2): 200-206.
A. Ewald, B. Lochner, U. Gbureck, J. Groll, R. Krüger.
Structural
optimization of macroporous magnesium phosphate scaffolds and their
cytocompatibility, Key Engineering Materials 2012; 493-494: 813-819.
E. Vorndran, N. Spohn, B. Nies, S. Rössler, S. Storch, U.
Gbureck:
Mechanical properties and drug release behaviour of bioactivated
PMMA-cements, Journal of Biomaterials Applications 2012; 26(5):
581-594.
Top
J. Schnieders, U. Gbureck, E. Vorndran, M. Schossig, T. Kissel.
The effect of porosity on drug release kinetics from vancomycin
microsphere/calcium phosphate cement composites, JBMR B 2011; 99B(2):
391-398.
N. Mehrban, J. Z. Paxton, J. Bowen, A. Bolarinwa, E. Vorndran, U.
Gbureck, L. M. Grover. Comparing physicochemical properties of printed
and hand cast biocements designed for ligament replacement, Advances in
Applied Ceramics 2011, 110: 162-167.
F. Tamini, D. Le Nihouannen, D.C. Bassett, S. Ibasco, U. Gbureck, J.C.
Knowles, A.J. Wright, S. Komarova, J.E. Barralet: Biocompatibility of
magnesium phosphate minerals and their stability under physiological
conditions, Acta Biomaterialia 2011; 7: 2678-2685.
U. Klammert, A. Ignatius, U. Wolfram, T.
Reuther, U. Gbureck: In vivo
degradation of low temperature calcium and magnesium phosphate ceramics
in a heterotopic model, Acta Biomaterialia, 2011; 7: 3469-3475.
Torres J, Tamimi F, Alkhraisat M, Prados-Frutos JC, Rastikerdar E,
Gbureck U, Barralet JE, López-Cabarcos E. Vertical bone
augmentation with 3D-synthetic monetite blocks in the rabbit calvaria,
J Clin Periodont 2011; 38:1147-53.
Tan YN, Patel S, Gbureck U, Grover LM. Controlling degradation in
calcium phosphate cements. Adv Appl Ceram 2011; 110: 457-463.
Stuckensen K, Gbureck U. Biphasic layered scaffolds with anisotropic
mineralization behavior for osteochondral tissue replacement. Tissue
Engineering Part A 2011; 17: 570-571.
Hill PJ, Stritzker J, Scadeng M, Geissinger U, Haddad D,
Basse-Lüsebrink TC., Gbureck U, Jakob P, Szalay AA. Magnetic
Resonance Imaging of Tumors Colonized with Bacterial
Ferritin-Expressing Escherichia coli. PLoS ONE 2011; 6(10): e25409.
doi:10.1371/journal.pone.0025409
E. Vorndran, K. Wunder, C. Moseke, I. Biermann, F. A. Müller,
K. Zorn, U. Gbureck: Hydraulic setting Mg3(PO4)2
powders for 3D printing technology, Adv Appl Ceram 2011; 110: 476-481.
C. Moseke, U. Gbureck, P. Elter, P. Drechsler, A. Zoll, R. Thull, A.
Ewald. Hard implant coatings with antimicrobial properties. Journal of
Materials Science: Materials in Medicine, 22(12), 2711-2720 (2011)
A. Ewald, D. Hösel, S. Patel, L.M. Grover, J.E. Barralet, U.
Gbureck. Silver-doped calcium phosphate cements with antimicrobial
activity. Acta biomaterialia, 7(11), 4064-4070 (2011)
R. Krüger, D. Joklitschke; U. Gbureck; A. Ewald. Development
and
Cytocompatibility Testing of Trimagnesium Phosphate and Struvite Foams.
Tissue Eng A, 17(3-4), 562 (2011)
E. Vorndran, A. Ewald, F.A. Müller,
K. Zorn, A. Kufner, U.
Gbureck. Formation and properties of magnesium-ammonium-phosphate
hexahydrate biocements in the Ca-Mg-PO(4) system. J Mater Sci Mater
Med. 22(3), 429-436 (2011)
C. Moseke, V. Saratsis, U. Gbureck, Injectability and mechanical
properties of magnesium phosphate cements. Journal of Materials
Science:
Materials in Medicine, Vol. 22, No. 12, 2011, 2591-2598
J. Groll. Control of nanofibre surface chemistry for biomaterials and tissue engineering.
Tissue Eng A, 17(3-4), 545-545 (2011)
Y. Hijikata, S. Horike, D. Tanaka, J. Groll, M. Mizuno, J. Kim, M.
Takatade, S. Kitagawa: Differences of crystal structure and dynamics
between a soft porous nanocrystal and a bulk crystal. Chem Commun 2011,
47, 7632-7634.
G. Boehm, Y. Ushakova, H.P. Alizai, T.
Braunschweig, C. Lente, K.-H.
Heffels, J. Groll, U.P. Neumann, K. Junge: Biocompatibility of PLGA /
sP(EO-stat-PO)-coated mesh surfaces under constant shearing stress.
European Surgical Research 2011, 47, 118-129.
S. Sinn, M. Eichler, L. Müller, D.
Bünger, J. Groll,
F. K.
Gehring, F. Rupp, J. Geis-Gerstorfer, G. Ziemer, H. P. Wendel:
NCO-sP(EO-stat-PO) coatings on gold sensors - a QCM study of
hemocompatibility. Sensors 2011, 11(5), 5253-5269.
D. Grafahrend, K.-H. Heffels, M.V. Beer, P. Gasteier, M. Moeller, G.
Boehm, P.D. Dalton, J. Groll: Degradable polyester scaffolds with
controlled surface chemistry combining minimal protein adsorption with
specific bioactivation. Nature Materials 2011, 10, 67-73.
R. Luxenhofer, J. Groll: Macromolekulare Chemie 2010. Nachrichten aus
der Chemie 2011, 59(3), 324-334.
J. Fiedler, J. Groll, E. Engelhardt, P.
Gasteier, C. Dahmen, H.
Kessler, M. Moeller, R. E. Brenner: NCO-sP(EO-stat-PO) surface coatings
preserve biochemical properties of RGD peptides. International Journal
of Molecular Medicine 2011, 27(1), 139-145.
K. Albrecht, M. Moeller, J. Groll: Nano- and microgels through addition
reactions of functional oligomers and polymers. Advances in Polymer
Science 2011, 234, 65-93.
Ewald A, Helmschrott K, Knebl G, Mehrban N, Grover LM, Gbureck U.
Effect of cold-setting calcium- and magnesium phosphate matrices on
protein expression in osteoblastic cells. J Biomed Mater Res B Appl
Biomater 2011; 96B(2): 326-332.
Top
M. Hamdan Alkhraisat, C. Rueda, F.T. Marino, J. Torres, L. Blanco
Jerez, U. Gbureck, E. Lopez Cabarcos: Effect of silica gel on the
cohesion, properties and biological performance of brushite cement,
Acta Biomaterialia 2010; 6: 257-265.
M. Hamdan Alkhraisat, C. Rueda, J. Cabrejos-Azama, J. Lucas-Aparicio,
F. Tamimi Mariño, J. Torres García-Denche, L.
Blanco
Jerez, U. Gbureck, E. Lopez Cabarcos. Loading and release of
doxycycline hyclate from strontium-substituted calcium phosphate
cement. Acta Biomaterialia 2010; 6: 1522-1528.
A. Bolarinwa, U. Gbureck, P. Purnell, M.
Bold, L. M. Grover: Cement
casting of calcium pyrophosphate based bioceramics, Advances in Applied
Ceramics 2010.
S. Patel, P.-J. Jiang, U. Gbureck, R. Caley,
L. M. Grover: Comparing
the efficacy of three bioceramic matrices for the release of vancomycin
hydrochloride, J Biomed Mater Res B 2010; 93: 51-58.
U. Klammert, T. Reuther, M. Blank, I. Reske, J.E. Barralet, L.M.
Grover, A.C. Kübler, U. Gbureck: Phase composition, mechanical
performance and in vitro biocompatibility of hydraulic setting calcium
magnesium phosphate cements, Acta Biomaterialia 2010; 6: 1529-1535.
U. Klammert, U. Gbureck, E. Vorndran, J. Rödiger, P.
Meyer-Marcotty, A.C. Kübler: 3D powder printed calcium
phosphate
implants for reconstruction of cranial and maxillofacial defects, J
Craniomaxillofac Surg 2010, 38: 565-570.
N.C. Hunt, A.M. Smith, U. Gbureck, R.M.
Shelton, L.M. Grover:
Encapsulation of fibroblasts causes alginate hydrogel degradation. Acta
Biomaterialia 2010; 6: 3649-3656.
C. Hertl, E. Werner, R. Thull, U. Gbureck:
Oxygen Diffusion Hardening
of cp-Titanium for biomedical applications, Biomedical Materials 2010;
5: 054104.
U. Klammert, E. Vorndran, T. Reuther, F.A.
Müller, K. Zorn, U.
Gbureck: Low temperature fabrication of magnesium phosphate cement
scaffolds by 3D powder printing, J Mater Sci: Mater Med 2010, 21:
2947-2953.
G. Klug, T. Kampf, S. Bloemer, J. Bremicker,
C.H. Ziener, A. Heymer, U.
Gbureck, E. Rommel, U. Nöth, W.A. Schenk, P.M. Jakob and W.R.
Bauer. Intracellular and extracellular T1 and T2 relaxivities of
magneto-optical nanoparticles at experimental high fields. Magnetic
Resonance in Medicine 2010; 64; 1607-1615.
Grossardt C, Ewald A, Grover LM, Barralet JE, Gbureck U. Passive and
active in vitro resorption of calcium and magnesium phosphate cements
by osteoclastic cells. Tissue Eng Part A. 16(12):3687-95 (2010)
Vorndran E; Klammert, U; Ewald A, Barralet
JE, Gbureck U. Simultaneous
Immobilization of Bioactives During 3D Powder Printing of Bioceramic
Drug-Release Matrices. Adv. Funct. Mat. 20(10):1585-1591 (2010).
C. Moseke, U. Gbureck, Tetracalcium phosphate: Synthesis, properties
and biomedical applications, Acta Biomaterialia 2010; 6(10): 3815
A. Kasten, P. Müller, U. Bulnheim,
J. Groll, K. Bruellhoff, U.
Beck, G. Steinhoff, M. Möller, J. Rychly: Mechanical integrin
stress and magnetic forces induce biological responses in mesenchymal
stem cells which depend on environmental factors. Journal of Cellular
Biochemistry 2010; 111(6): 1586-1597.
K. Bruellhoff, J. Fiedler, M. Moeller, J. Groll, R. E. Brenner: Surface
coating strategies to prevent biofilm formation on implant surfaces.
International Journal of Artificial Organs 2010, 33(9), 646-653.
J. Groll, M. Moeller: Star Polymer Surface
Passivation for Single
Molecule Detection. Methods in Enzymology 2010, 472, 1-18.
K. Klinkhammer, J. Bockelmann, C. Simitzis,
G. A. Brook, D. Grafahrend,
J. Groll, M. Möller, J. Mey, D. Klee: Functionalization of
electrospun fibers of poly(ε-caprolactone) with star shaped
NCO-poly(ethylene glycol)-stat-poly(propylene glycol) for neuronal cell
guidance. J Mater Sci Mater Med. 2010, 21(9), 2637-2651.
M. Bartneck, H. A. Keul, S. Singh, K. Czaja,
J. Bornemann, M.
Bockstaller, M. Möller, G. Zwadlo-Klarwasser and J. Groll:
Rapid
uptake of gold nanorods by primary human blood phagocytes and
immunomodulatory effects of surface chemistry. ACS Nano 2010, 4 (6),
3073-3086.
D. Grafahrend, K.-H. Heffels, M. Möller, D. Klee, J. Groll:
Electrospun, Biofunctionalized Fibers as Tailored in vitro Substrates
for Keratinocyte Cell Culture. Macromolecular Bioscience 2010, 10(9),
1022-1027.
K. Gavenis, U. Schneider, J. Groll, B. Schmidt-Rohlfing: BMP-7-loaded
PGLA microspheres as a new delivery system for the cultivation of human
chondrocytes in a collagen type I gel: the common nude mouse model.
International Journal of Artificial Organs 2010, 33(1), 45-53.
D. Tanaka, A. Henke, K. Albrecht, M. Moeller, K. Nakagawa, S. Kitagawa,
J. Groll: Rapid Preparation of Flexible Porous Coordination Polymer
Nanocrystals with Accelerated Guest Adsorption Kinetics. Nature
Chemistry 2010, 2, 410-416.
M. Bartneck, H. A. Keul, G. Zwadlo-Klarwasser, J. Groll: Phagocytosis
Independent Extracellular Nanoparticle Clearance by Human Immune Cells.
NanoLetters 2010, 10, 59-63.
A. Dhanasingh, J. Salber, M. Moeller, J. Groll: Hydrophilic Prepolymer
Cross-Linkers for Tailored Hyaluronic Acid Hydrogels. Soft Matter 2010,
6, 618-629.
W. Ahmed, T. Wolfram, A. Goldyn, K. Bruellhoff, B. A. Rioja, M.
Möller, J. P. Spatz, T. A. Saifa, J. Groll, R. Kemkemer:
Myoblast
morphology and organization on biochemically micropatterned hydrogel
coatings under cyclic mechanical strain. Biomaterials 2010, 31(2),
250-258.
Top
U. Klammert, T. Reuther, C. Jahn, A.C. Kübler, U. Gbureck:
Biocompatibility of brushite and monetite cell culture scaffolds made
by 3D powder printing, Acta Biomaterialia 2009; 5: 727-734.
M. Hofmann, A.R. Mohammed, Y. Perrie, U.
Gbureck, J.E. Barralet. High
strength resorbable brushite bone cement with controlled drug releasing
capabilities, Acta Biomaterialia 2009; 5: 43-49.
Y. Liu, J. E. Barralet, U. Gbureck, R.
Shelton: Influence of Calcium
Phosphate Crystal Morphology on the Adhesion, Spreading and Growth of
Bone Derived Cells, JBMR Part A 2009, 90A: 972-980.
J.E. Barralet, U. Gbureck, P. Habibovic, E.
Vorndran, C. Gerard, C.J
Doillon: Angiogenesis in calcium phosphate scaffolds by inorganic
copper release, Tissue Engineering 2009; 15: 1601-1609.
Klammert U, Böhm H, Schweitzer T,
Würzler K, Gbureck
U,
Reuther J, Kübler A. multi-directional Le Fort III midfacial
distraction using an individual prefabricated device, J
Craniomaxillofac Surg 2009, 37:210-215.
M. Hamdan Alkhraisat, C. Rueda, F.T. Marino, J. Torres, L. Blanco
Jerez, U. Gbureck, E. Lopez Cabarcos: The effect of hyaluronic acid on
brushite cement cohesion, Acta Biomaterialia 2009, 5:3150-3156.
C. Stötzel, F.A. Müller,
J.E. Barralet, F. Reinert,
F.
Niederdraenk, U. Gbureck: Ion adsorption behaviour of hydroxyapatite
powders with different crystallinities, Colloids and Surfaces B:
Biointerfaces 2009, 74: 91-95.
F. Tamimi, J. Torres, U. Gbureck, E. Lopez-
Cabarcos, D.C. Basset, M.
Hamdan Alkhreisat, J.E. Barralet: Craniofacial vertical bone
augmentation capacity of 3D printed monolithic CaHPO4 blocks compared
to autologous onlay grafts, Biomaterials 2009; 30: 6318-6326.
Ewald A, Ihde S. Salt impregnation of implant materials. Oral Surg Oral
Med Oral Pathol Oral Radiol Endod. 107(6):790-52009 (2009).
Elter P, Sickel F, Ewald A.Nanoscaled
periodic surface structures of
medical stainless steel and their effect on osteoblast cells. Acta
Biomater.5(5):1468-73 (2009)
Moseke C; Braun W; Ewald A.
Electrochemically Deposited Ca(OH)2
Coatings as a Bactericidal and Osteointegrative Modification of Ti
Implants. Adv. Eng. Mat. 11(3): B1-B6 (2009)
Vollmar F, Hacker C, Zahedi RP, Sickmann A, Ewald A, Scheer U,
Dabauvalle MC. Assembly of nuclear pore complexes mediated by major
vault protein. J Cell Sci. 122(Pt 6):780-6 (2009).
Moseke C; Ewald A.: Cell and protein
adsorption studies using quartz
crystal microgravimetry with dissipation monitoring.
Materialwissenschaft und Werkstofftechnik, , 40 (1-2): 36-42 (2009)
J. Groll, J. Fiedler, K. Bruellhoff, M. Moeller, R. E. Brenner: Novel
surface coatings modulating eukaryotic cell adhesion and preventing
implant infection. International Journal of Artificial Organs 2009; 32,
655-662.
J. Groll, S. Singh, K. Albrecht, M. Moeller: Biocompatible and
Degradable Nanogels via Oxidation Reactions of Synthetic Thiomers in
Inverse Miniemulsion. Journal of Polymer Science Part A: Polymer
Chemistry 2009; 47(20): 5543-5549.
Top
Ince A, Schutze N, Hendrich C, Thull R, Eulert J, Lohr JF. In vitro
investigation of orthopedic titanium-coated and brushite-coated
surfaces using human osteoblasts in the presence of gentamycin. J
Arthoplasty 2008; 23: 762-771.
Casu MB, Braun W, Bauchspiess KR, Kera S, Megner B, Heske C, Thull R,
Umbach E. A multi-technique investigation of TiO2 films prepared by
magnetron sputtering. Surf Sci 2008; 602: 1599-1606.
M. Bohner, U. Gbureck: Thermal reactions of brushite cements, J Biomed
Mater Res Part B 2008, 84B: 375-385.
P. Habibovic, U. Gbureck, C.J. Doillon, D.C. Bassett, C.A. van
Blitterswijk, J.E. Barralet: Osteoconduction and osteoinduction of low
temperature 3D printed ceramic implants, Biomaterials, 2008; 29:
944-953.
S. Mahmood, W.M. Palin, U. Gbureck, O. Addison, M.P. Hofmann: Effect of
mechanical mixing and powder to liquid ratio on the strength and
reliability of a brushite bone cement, Key Engin. Mater. 2008; 361-363:
307-310.
L.M. Grover, S. Patel, Y. Hu, U. Gbureck, J.E. Barralet: Modifying
brushite cement degradation using calcium alginate beads, Key. Engin.
Mater. 2008; 361-363: 311-314.
P.J. Jiang, S. Patel, U. Gbureck, L.M. Grover: A comparison of the
efficacy of hydroxyapatite based cements and gels as drug delivery
matrices, Key. Engin. Mater. 2008; 361-363: 327-330.
A. Heymer, D. Haddad, M. Weber, U. Gbureck, P. Jakob, U. Nöth.
Iron oxide labelling of human mesenchymal stem cells in
collagen hydrogels
for articular cartilage repair, Biomaterials 2008; 29: 1473-1483.
A.M. Young, P.Y. J. Ng, U. Gbureck, S.N. Nazhat, J.E. Barralet, M.P.
Hofmann: Characterization of chlorhexidine-releasing, fast-setting,
brushite bone cements, Acta Biomaterialia 2008; 4(4):
1081-1088.
U. Gbureck, T. Hölzel, I. Biermann,
J.E. Barralet, L.M.
Grover:
Preparation of TCP / calcium pyrophosphate structures via rapid
prototyping, J. Mater. Sci.: Mater. Med. 2008; 19. 1559-1563.
U. Gbureck, E. Vorndran, J.E. Barralet: Modeling vancomycin release
kinetics
from porous calcium phosphate ceramics comparing static and dynamic
immersion conditions, Acta Biomaterialia 2008; 4: 1480-1486.
C.E. Pedraza, D.C. Bassett, M.D. McKee, V. Nelea, U. Gbureck, J.E.
Barralet: The importance of particle size and DNA condensation salt for
calcium phosphate nanoparticle transfection. Biomaterials 2008; 29:
3384-3392.
F. Tamimi, B. Kumarasami, C. Doillon, U. Gbureck, D. Le Nihouannen, E.
Lopez Cabarcos, J. E. Barralet: Brushite-collagen composites for bone
regeneration, Acta Biomaterialia 2008; 4: 1315-1321.
D. Le Nihouannen, S. A. Hacking, U. Gbureck, S. V. Komarova, J. E.
Barralet: The use of RANKL-coated brushite cement to stimulate bone
remodelling, Biomaterials, 2008; 29: 3253-3259
D. Tebbe, U. Gbureck, R. Thull: Modifikation von
Titanoberflächen
zur kovalenten Anbindung von Amino-funktionalisierten Silanspacern;
BIOmaterialien 2008.
L.M. Grover, M.P. Hofmann, U. Gbureck, B. Kumarasami, J.E. Barralet:
Frozen delivery of brushite calcium phosphate cement, Acta
Biomaterialia 2008, 4: 1916-1923.
M. Hamdan Alkhraisat, C. Moseke, L. Blanco,
E. Lopez-Carbacos, J. E.
Barralet, U. Gbureck: Strontium modified biocements with zero order
release kinetics, Biomaterials 2008; 29: 4691-4697.
D. Le Nihouannen, S. V. Komarova, U Gbureck, J E Barralet, Bioactivity
of bone resorptive factor loaded on osteoconductive matrices: stability
post-dehydration. European Journal of Pharmaceutics and
Biopharmaceutics 2008 70: 813-818.
E. Vorndran, M. Klarner, U. Klammert, L.M. Grover, S. Patel, J.E.
Barralet, U. Gbureck: 3D Powder Printing of β-Tricalcium
Phosphate
Ceramics using different Strategies, Advanced Biomaterials 2008; 10:
B67-B71.
Nebe JB, Müller L, Lüthen F, Ewald A, Bergemann C,
Conforto
E, Müller FA. Osteoblast response to biomimetically altered
titanium surfaces. Acta Biomaterialia, 4(9) 1985-1995 (2008)
Dembski S, Graf C, Krüger T, Gbureck U, Ewald A, Bock A,
Rühl
E.: Photoactivation of CdSe/ZnS quantum dots embedded in silica
colloids. Small. 4(9):1516-26 (2008).
A. Reska, P. Gasteier, K. Albrecht, P. Schulte, A.
Offenhäusser,
M. Moeller, J. Groll: Ultrathin coatings with reactivity change by time
enable functional in vitro networks of insect neurons. Advanced
Materials 2008, 20, 2751-2755.
P. D. Dalton, C. Hostert, K. Albrecht, M.
Moeller, J. Groll*: Structure
and Properties of Urea Crosslinked Star Poly(ethylene
oxide-stat-propylene oxide) Hydrogels. Macromolecular Bioscience 2008,
8, 923-931.
P. D. Dalton, N. Joergensen, J. Groll, M.
Moeller: Patterned Melt
Electrospun Substrates for Tissue Engineering. Biomedical Materials
2008, 3, 034109 (11pp).
K. Albrecht, A. Mourran, X. Zhu, T.
Markkula, J. Groll, U. Beginn, W.
H. de Jeu, M. Moeller: Thin Film Morphologies of Block Copolymers
Complexed with Wedge-Shaped Liquid Crystalline Amphiphilic Molecules.
Macromolecules 2008, 41(5), 1728-1738.
J. Hoffmann, A. Paul, M. Harwardt, J. Groll, T. Reeswinkel, D. Klee, M.
Moeller, H. Fischer, T. Walker, G. Ziemer, H. P. Wendel: Immobilized
DNA Aptamers Used as Potent Attractors for Porcine Endothelial
Precursor Cells. J. Biomed. Mater. Res. Part A 2008, 84A, 614-621.
Top
U. Gbureck, T. Hölzel, C. Doillon,
F. A. Müller, J.E.
Barralet: Direct printing of bioceramic implants with spatially
localised angiogenic factors. Adv. Mater. 2007, 19: 795-800.
M.P. Hofmann, U. Gbureck, C.O. Duncan, M.S. Dover, J.E. Barralet:
Carvable calcium phosphate bone substitute material, J Biomed Mater Res
Part B, 2007; 83B: 1-8.
U. Gbureck, O. Knappe, N. Hoffmann, J. E. Barralet: Antimicrobial
Properties of Nanocrystalline Tetracalcium Phosphate Cements, J Biomed
Mater Res Part B, 2007; 83B: 132-137.
K.J. Lilley, U. Gbureck, A.J. Wright, J.C. Knowles, D.F. Farrar, J.E.
Barralet: Brushite cements from polyphosphoric acid, calcium phosphate
systems, J Am Ceram Soc 2007, 90(6): 1892-1898.
D. Tebbe, R. Thull, U. Gbureck: Correlation between heparin release and
polymerization degree of organically modified silica ceramics from
3-methacryloxypropylpolysilsesquioxane, Acta Biomaterialia 2007; 3:
829-837.
D. Tebbe, R. Thull, U. Gbureck: Influence of spacer length on heparin
coupling efficiency and fibrinogen adsorption of modified titanium
surfaces, Biomedical Engineering online, 2007; 6: 31.
U. Gbureck, E. Vorndran, F.A. Müller, J.E. Barralet: Low
temperature direct 3D printed bioceramics and biocomposites as drug
release matrices, J Controlled Release 2007; 122: 173-180.
U. Gbureck, T. Hölzel, U. Klammert,
K. Würzeler, F.A.
Müller, J.E. Barralet: Resorbable dicalcium phosphate bone
substitutes made by 3D powder printing, Advanced Functional Materials
2007, 17: 3940-3945.
F.A. Müller, U. Gbureck, T. Kasuga, Y. Mizutani, J.E.
Barralet, U.
Lohbauer. Whisker reinforced calcium phosphate cements, J Am Ceram Soc
2007; 90(11): 3694-3697.
J. Salber, S. Gräter, M. Harwardt,
M. Hofmann, D. Klee, J.
Dujic,
H. Jinghuan, J. Ding, S. Kippenberger, A. Bernd, J. Groll, J. P. Spatz,
M. Möller: Influence of Different ECM Mimetic Peptide
Sequences
Embedded in a Nonfouling Environment on the Specific Adhesion of Human
Skin Keratinocytes and Fibroblasts on Deformable Substrates. Small
2007, 3(6), 1023-1031.
P. Gasteier, A. Reska, P. Schulte, J. Salber, A. Offenhäusser,
M.
Moeller, J. Groll: Surface grafting of PEO-based star shaped molecules
for bioanalytical and biomedical applications. Macromolecular
Bioscience 2007, 7, 1010-1023.
J. Groll, H. Rong, P. Greiwe, M. Flach: Star performers: six-armed
prepolymers for biosensing coatings. European Coating Journal 2007, 5,
162-167.
M. C. Lensen, P. Mela, A. Mourran, J. Groll, J. Heuts, H. Rong, M.
Möller: Micro- and Nanopatterned Star Poly(ethylene glycol)
(PEG)
Materials Prepared by UV-Based Imprint Lithography. Langmuir 2007,
23(14), 7841-7846.
C.D. Heyes, J. Groll, M. Möller, G.U. Nienhaus: Synthesis,
patterning and applications of star shaped poly (ethylene glycol)
biofunctionalized surfaces. Molecular Biosystems 2007, 6, 419-430.
A. Offenhäusser, S. Böcker-Meffert, T. Decker, R.
Helpenstein, P. Gasteier, J. Groll, M. Möller, A. Reska, S.
Schäfer, P. Schulte, A. Vogt: Microcontact Printing of
Proteins
for Neuronal Cell Guidance. Soft Matter 2007, 3, 290-298.
Top
Eisenbarth E, Velten D, Muller M, Thull R, Breme J. Nanostructured
niobium oxide coatings influence osteoblast adhesion. J Biomed Mater
Res 2006; 79: 166-175.
L.M. Grover, U. Gbureck, M.J. Tremayne, J.E. Barralet: Biologically
mediated resorption of brushite cement in vitro, Biomaterials 2006, 27:
2178-2185.
M.P. Hofmann, A.M. Young, S.N. Nazhat, U. Gbureck, J.E. Barralet:
Setting Kinetics Observation of a Brushite Cement by FTIR and DSC, Key
Engineering Materials 2006; 309-311: 837-830.
N.J.S. Gorst, U. Gbureck, Y. Perrie, A.L. Hutton, M.P. Hofmann, L.M.
Grover, J.E., Barralet: Effect of fiber reinforcement on the mechanical
properties of brushite cement, Acta Biomaterialia 2006; 2: 95-102.
R. M. Shelton, Y. Liu, P.R. Cooper, U. Gbureck, M. J. German, J. E.
Barralet: Bone marrow cell gene expression and tissue construct
assembly using octacalcium phosphate microscaffolds, Biomaterials 2006;
17: 2874-2881.
L.M. Grover, U. Gbureck, D.F. Farrar and J.E. Barralet: Adhesion of a
novel calcium phosphate cement to cortical bone and several common
biomaterials. Key Engin Mater 2006; 309-311: 849-852.
K. J. Lilley, U. Gbureck, A.J. Wright, D. Farrar, J.E. Barralet:
Investigation into carboxylic acids as cement reactants, Key
Engineering Materials 2006; 309-311: 853-856.
M. Bohner, A. Malsy, C.L. Camiree, U. Gbureck: Combining particle size
distribution and isothermal calorimetry data to determine the reaction
kinetics of α-Tricalcium phosphate - water mixtures, Acta
Biomaterialia 2006; 2(3): 343-348.
J. Schnieders, U. Gbureck, R. Thull, T. Kissel: Controlled release of
gentamicin from calcium phosphate - poly(lactic acid-co-glycolic acid)
composite bone cement, Biomaterials 2006, 27: 4239-4249.
Z. Xia, L. M.l Grover, Y. Huang, I. Adamopoulos, U. Gbureck, J. T.
Triffit, R. M. Shelton, J. E. Barralet: In vitro Biodegradation of
Three Brushite Calcium Phosphate Cements by a Macrophage Cell-line,
Biomaterials 2006, 27: 4557-4565.
M.P. Hofmann, A.M. Young, U. Gbureck, S.N. Nazhat, J.E. Barralet:
FTIR-monitoring of a fast setting brushite bone cement: Effect of
intermediate phases, J Mater Chem, 2006; 16: 3199.
M.P. Hofmann, S.N. Nazhat, U. Gbureck, J.E. Barralet: Real time
monitoring of the setting reaction of brushite cement: Effect of citric
acid, J Biomed Mater Res, 2006, 79B(2): 360-364.
U. Gbureck, T. Hölzel, R. Thull, F.A. Muller, J.E. Barralet.
Preparation of nanocrystalline hydroxyapatite scaffolds by 3D powder
printing. Cytotherapy 2006; 8: 14-14 046 Suppl. 2.
U. Gbureck, P. Rösch, R. Thull: Einfluss von
Aminosäuren auf
die physikalischen und chemischen Eigenschaften von
Calcium-Phosphat-Zementen, BIOmaterialien 2006; 7(4): 271-277.
Ewald, A., Hauck F. K., Thull, R.: Zellbiologische Untersuchungen des
Werkstoffes Gold zur Anwendung als Implantatmaterial im Mittelohr.
Biomaterialien, 7 (2), 67-73 (2006).
Ewald, A., Glückermann S.K., Thull R., Gbureck U.:
Antimicrobial
titanium/silver PVD coatings on titanium. BioMedical Engineering
Online, 5, 22 (2006).
J. Hoffmann, J. Groll, J. Heuts, H. Rong, D. Klee, G. Ziemer, M.
Moeller, H. P. Wendel: Blood Cell and Plasma Protein Repellent
Properties of Star PEG Modified Surfaces. J. Biomat. Sci. - Polymer
Edition 2006, 17(9), 985-996.
M. Möller, J. Groll: Kontrolle der Wechselwirkungen von
Flächen mit der Biosphäre. Labor&More 2006,
3(4), 32-37.
Top
Braun W, Walter U, Holbein R, Thull R. Electrochemical properties of
biocompatible metal modifications on titanium and steel under
mechanical loads. Biomed Tech 2005; 50: 100-106.
Endruweit A, Fritzsche S, Thull R, Haase A, Baur W.High-performance
composites for applications in medical engineering: Susceptibility
artifacts in magnetic resonance imaging. J Reinforc Plast Comp 2005;
24: 131-146.
M.P. Hofmann, U. Gbureck, L.M. Grover, J.E. Barralet: Stearate salts as
brushite bone cement setting retardants, Key Eng. Mater. 2005; 284-286,
19-22.
L.M. Grover, U. Gbureck, D. Farrar, J.E. Barralet: The Mechanical
Properties and Microstructures of Cement Formed from Pyrophosphoric and
Orthophosphoric Acids, Key Eng. Mater. 2005; 284-286, 125-128.
C.L. Camire, U. Gbureck, W. Hirsiger, M. Bohner: Correlating
crystallinity and reactivity in an α-tricalcium phosphate
cement,
Biomaterials, 2005; 26: 2787-2794.
U. Gbureck, S. Dembski, R. Thull, J.E. Barralet: Factors influencing
Calcium Phosphate Cement Shelf-Life, Biomaterials, 2005; 26: 3691-3697.
J.E. Barralet, M.J. Tremayne, K.J. Lilley, U. Gbureck: Chemical
modification of calcium phosphate cements with α-hydroxy
acids
and their salts, Chem. Mater., 2005; 17: 1313-1319.
U. Gbureck, R. Thull, J.E. Barralet: Alkali ion substituted calcium
phosphate cement formation from mechanically activated reactants, J.
Mater Sci.: Mater. Med. 2005; 16: 423-427.
K.J. Lilley, U. Gbureck, J.C. Knowles, D.F. Farrar, J.E. Barralet:
Cement from Magnesium Substituted Hydroxyapatite, J. Mater. Sci.:
Mater. Med., 2005; 16: 455-460.
U. Gbureck, K. Spatz, R. Thull, J.E. Barralet: Rheological enhancement
of mechanically activated α-tricalcium phosphate cements, J.
Biomed. Mater. Res. (Appl. Biomat.), 2005; 73B: 1-6.
J.E. Barralet, D.C. Bassett, C.O. Duncan, H. Nishikawa, S. Dover, A.
Monaghan, U. Gbureck: Bone screw fixation in ionically modified apatite
cement; J. Biomed. Mater. Res. 2005; 73B: 238-243.
U. Gbureck, M. Hofmann, J.E. Barralet: Thermal performance of
mechanically activated tetracalcium phosphate, J. Am. Ceram. Soc.,
2005; 88(5): 1327-1330.
M. Bohner, U. Gbureck, J.E. Barralet: Technological issues for the
developement of more efficient calcium phosphate bone cements: A
critical assessment, Biomaterials 2005; 26; 6423-6429.
R. Müller, J. Abke, F. Macionczyk, U. Gbureck, Z. Ruszczak, R.
Mehrl, R. Kujat, C. Englert, H. Faltermeier, M. Nehrlich, P. Angele:
Surface Engineering of stainless steel materials by tantalum and
collagen immobilisation to enhance the biological performance,
Biomaterials 2005; 26: 6962-6972.
U. Gbureck, O. Knappe, L.M. Grover, J.E. Barralet: Antimicrobial
potency of alkali ion substituted Calcium Phosphate
Cements, Biomaterials 2005; 26: 6880-6886.
K.J. Lilley, U. Gbureck, A.J. Wright, D.F. Farrar, J.E. Barralet:
Cement from nanocrystalline Hydroxyapatite: Effect of Calcium Phosphate
Ratio; J Mater Sci: Mater Med 2005; 16: 1185-1190.
L.M. Grover, U. Gbureck, A.J. Wright, J.E. Barralet: Cement
formulations in the calcium phosphate - H2O - H3PO4
- H4P2O7
system, J. Am. Ceram. Soc. 2005; 88(11): 3096-3103.
U. Gbureck, S. Grübel, R. Thull, J.E. Barralet: Modified
PMMA-cements for a hydrolysis resistant metal-polymer interface in
orthopaedic applications, Acta Biomaterialia 2005; 1: 671-676.
L.M. Grover, A. Young, U. Gbureck, A.J. Wright, J.E. Barralet:
Temperature dependant setting kinetics and mechanical properties of
β-tricalcium phosphate - pyrophosphoric acid cement, J. Mater.
Chem. 2005, 15, 4955 - 4962.
U.Gbureck, R. Thull: Mechanische und rheologische Eigenschaften
mineralischer Knochenzemente; BIOmaterialien 2005; 6(4): 287-296.
Ewald A., Hauck A., Schwager K., Helms J., Thull R.:
Oberflächenabhängige in-vitro Analyse
primärer
Patientenosteoblasten. Biomaterialien in der Hals-, Nasen-,
Ohren-Heilkunde. Biomaterialien (6 S1), 22-23 (2005).
J. Groll, K. Albrecht, P. Gasteier, S. Riethmüller, U. Ziener,
M.
Möller: Nanostructured Ordering of Fluorescent Markers and
Single
Proteins on Substrates. ChemBioChem 2005, 6, 1782-1787.
T. Ameringer, M. Hinz, C. Mourran, H. Seliger, J. Groll*, M. Moeller:
Ultrathin Functional Star PEG Coatings for DNA Microarrays.
Biomacromolecules 2005, 6, 1819-1823.
J. Groll, J. Fiedler, E. Engelhard, T. Ameringer, S. Tugulu, H.-A.
Klok, R.E. Brenner, M. Möller: A Novel Star PEG derived
Surface
Coating for Specific Cell Adhesion. J. Biomed. Mater. Res. Part A 2005,
74A, 607-617.
J. Groll, Z. Ademovic, T. Ameringer, D. Klee, M. Möller: A
Comparison of Coatings from Reactive Star Shaped PEG-stat-PPG
Prepolymers and Linear PEG for Biological and Medical Applications.
Biomacromolecules 2005, 6, 956-962.
J. Groll, W. Haubensak, T. Ameringer, M. Möller: Ultrathin
Coatings from Isocyanate Terminated Star PEG Prepolymers: Patterning of
Proteins on the Layers. Langmuir 2005, 21, 3076-3083.
J. Groll, T. Ameringer, J.P. Spatz, M. Möller: Ultrathin
Coatings
from Isocyanate Terminated Star PEG Prepolymers: Layer Formation and
Characterization. Langmuir 2005, 21, 1991-1999.
Top
Strehle MA, Rosch P, Petry R, Hauck A, Thull R, Kiefer W, Popp J.A
Raman spectroscopic study of the adsorption of fibronectin and
fibrinogen on titanium dioxide nanoparticles. Phys Chem Chem Phys 2004;
6: 5232-5236.
Eisenbarth E, Velten D, Muller M, Thull R, Breme J.Biocompatibility of
beta-stabilizing elements of titanium alloys. Biomaterials 2004; 25:
5705-5713.
U. Gbureck, J. E. Barralet, L. M. Grover, K. Spatz, R. Thull: Ionic
Modification of Calcium Phosphate Cement Viscosity Part I: Hypodermic
injection and strength improvement of apatite cements; Biomaterials,
2004; 25(11): 2187-2195.
J. E. Barralet, L.M. Grover, U. Gbureck: Ionic Modification of Calcium
Phosphate Cement Viscosity Part II: Hypodermic Injection and Strength
Improvement of Brushite Cements, Biomaterials, 2004; 25(11): 2197-2203.
U. Gbureck, M. Hofmann, J.E. Barralet, L. Grover, R. Thull:
Thermodynamic study of formation of amorphous β-tricalcium
phosphate for calcium phosphate cements; Key Engin. Mater. 2004;
254-256: 249-252.
J.E. Barralet, U. Gbureck, L. M. Grover, R. Thull: Mechanically induced
phase transformation of α- and β-Tricalcium
Phosphate; Key
Engin. Mater. 2004; 254-256: 277-280.
L. M. Grover, U. Gbureck, J.E. Barralet: Low Porosity CaPO4
x 2H2O cements, Key Engin. Mater. 2004; 254-256:
205-208.
K. J. Lilley, U. Gbureck, J. E. Barralet: Cements from Biphasic
β-Tricalcium phosphate, Key Engin. Mater. 2004; 254-256:
281-284.
U. Gbureck, J. E. Barralet, M. Hofmann, R. Thull: Mechanical Activation
of Tetracalcium Phosphate, J. Am. Ceram. Soc., 2004; 87(2): 311-313.
J.E. Barralet, K. J. Lilley, D.F. Farrar, C. Ansell, U. Gbureck:
Cements from nanocrystalline Hydroxyapatite, J. Mater. Sci.: Mater.
Med., 2004; 15: 405-409.
U. Gbureck, J. E. Barralet, M. Hofmann, R. Thull: Nanocrystalline
Tetracalcium Phosphate Cement, J. Dent. Res. 2004; 83(5): 425-428.
U. Gbureck, J. E. Barralet, L. Radu, H. G. Klinger, R. Thull: Amorphous
α-tricalcium phosphate: preparation and aqueous setting
reaction;
J. Am. Ceram. Soc. 2004, 87(6): 1126-1132.
U. Gbureck, L. Lansnicker, T. Holste, R. Thull: Vergleichende
Untersuchungen zur Eignung eines neuen
Oberflächenkonditionierungs-Verfahrens (Airsonic Miniblaster)
in
der Klebebrückentechnik, Biomed. Technik 2004; 49: 11-17.
S. Winter, F. Aubertin, U. Gbureck, U. T. Seyfert, R. Thull, J. Breme:
Untersuchung des Benetzungsverhaltens von
oberflächenmodifizierten
Ti-Werkstoffen im Hinblick auf eine verbesserte
Hämokompatibilität; BIOmaterialien 2004; 5(2): 48-52.
U. Gbureck, R. Thull, Tribochemische TiO2-Beschichtungen
auf Dental-legierungen, Dental Praxis 2004; 3/4: 89-94.
U. Gbureck, S. Dembski, R. Thull, J.E. Barralet:
Bruschit-Knochenzemente aus biphasigen β-Tricalciumphosphat /
Calciumpyrophosphat Keramiken, BIOmaterialien, 2004; 5(4): 255-260.
Ewald, A., Thull, R.: Proteinexpressionsmuster von
adhärierenden
Zellen an oberflächenmodifiziertem Titan in Zahnimplantaten.
Biomaterialien (5 S1), 20-21 (2004).
Reichart B, Klafke R, Dreger C, Kruger E, Motsch I, Ewald A, Schafer J,
Reichmann H, Muller CR, Dabauvalle MC.: Expression and localization of
nuclear proteins in autosomal-dominant Emery-Dreifuss muscular
dystrophy with LMNA R377H mutation. BMC Cell Biol. 5:12. (2004)
E.V. Amirgoulova, J. Groll, C.D. Heyes, T. Ameringer, C.
Röcker,
Martin Möller, G.U. Nienhaus: Biofunctionalized polymer
surfaces
exhibiting minimal interaction towards immobilized proteins.
ChemPhysChem 2004, 5, 552-555.
J. Groll, E. Amirgoulova, T. Ameringer, C.D. Heyes, C. Röcker,
G.U. Nienhaus, M. Möller: Biofunctionalized, Ultrathin
Coatings of
Crosslinked Star-shaped Poly(ethylene oxide) allow reversible folding
of immobilized proteins. J. Am. Chem. Soc. 2004, 126, 4234.
Top
U. Gbureck, J. Probst, R. Thull: Polymerization behavior of organically
modified Titanium Alkoxides in Solution, J. Sol-Gel-Science and
Technology, 2003, 27(2): 157-62.
U. Gbureck, J. Probst, A. Masten, R. Thull: Tribochemical Structuring
and Coating of Implant Metal Surfaces with Titaniumoxide- and
Hydroxyapatite-Layers, Materials Science & Engineering C 23;
2003:
461-465.
U. Gbureck, L. Radu, H.G. Klinger, R. Thull: Mechanische Aktivierung
von α-Tricalciumphosphat und Reaktivität in
flüssiger
Phase, BIOmaterialien, 4(1); 2003: 19-26.
C. Schmidt, U. Gbureck, R. Thull: Charakterisierung
Heparin-beschichteter Titandioxide mittels Ramanspektroskopie und
Zeta-Potential, BIOmaterialien, 4(1); 2003: 38-43.
U. Gbureck, O. Grolms, L. Grover, J. E. Barralet, R. Thull: Mechanical
activation of β-Tricalcium phosphate and cement formation with
Na2HPO4 solution;
Biomaterials 24(23), 4123-4131, 2003.
U. Gbureck, K. Spatz, R. Thull: Improvement of mechanical properties of
self setting calcium phosphate bone cements with several metal oxides,
Mat.-wiss. u. Werkstofftech., 2003; 34 (12): 1036-1040.
J. E. Barralet, M. Hofmann, L. M. Grover, U. Gbureck:
High Strength Apatitic Cement by Modification
with
α-hydroxy acid salts,
Advanced Materials,
2003,
15(24), 2091.
U. Gbureck, J. E. Barralet, L.M. Grover, M. Hofmann, R. Thull:
Mechanische Festigkeit und Porosität von
Calciumphosphat-Zementen, BIOmaterialien, 2003; 4(4): 258-264.
Top
U. Gbureck, J. Probst, R. Thull: Surface Properties of Calcium
Phosphate Particles for self setting Bone Cements, J. Biomolec. Engin.,
2002; 19: 51-55.
Top
J. Götze, R.B. Heimann, H. Hildebrandt, U. Gbureck:
Microstructural investigation into calcium phosphate biomaterials by
spatially resolved cathodoluminescence, Mat.-wiss. U. Werkstofftech.
2001; 32: 130-136.
U. Gbureck, R. Thull: Tribochemische TiO2-Beschichtungen
auf Dentallegierungen, BIOmaterialien 2001; 2 (2/3): 93-98.
J. Probst, U. Gbureck, R. Thull: Binary nitride and oxynitride PVD
coatings on Titanium for Biomedical applications, Surface and Coatings
Technology 2001; 148: 226-33.
Ewald, A., Zünkler, C., Lourim. D. and Dabauvalle, M.-C.:
Microtubule-dependent assembly of the nuclear envelope in Xenopus
laevis egg extract. Eur. J. Cell Biol. 80 (11), 678-691 (2001).
Hofmann, W., Reichart, B., Ewald, A., Müller, E., Schmitt, I.,
Stauber, R.H., Lottspeich, F., Jockusch, B., Scheer, U., Hauber, J. and
M.-C. Dabauvalle: Cofactor requirements for nuclear export of Rev
response element (RRE)- and constitutive transport element
(CTE)-containing retroviral RNAs. An unexpected role for actin. J. Cell
Biol., 152, 895 - 910 (2001).
Top
A. Gbureck, U. Gbureck, W. Kiefer, U. Posset, R. Thull: FT-Raman
Spectroscopic Investigations of Titanium Alkoxides with Polymerizable
Organic Ligands, Applied Spectroscopy, 54 (3), 2000, 390.
Top
M. Geffers, U. Gbureck, C. Moseke, E. Vorndran: Organic/Inorganic Hybrid Nanoceramics Based
on Sol-Gel Chemistry.
Handbook of nanoceramic and nanocomposite coatings and materials, Elsevier 2015.
C. Moseke, U. Gbureck: Tetracalcium phosphate-based dental cements.
Calcium Phosphate: Structure, Synthesis, Properties, and Applications, Nova Science Publishers 2012.
J. Groll, M. Moeller: Surface Passivation for Single Molecule Detection.
Encyclopedia of Biophysics, Springer 2012.
F. Topuz, D. Buenger, D. Tanaka, J. Groll: Hydrogels in Biosensing
Applications.
Comprehensive Biomaterials. Elsevier 2011.
C. Moseke, R. Michalek, R. Thull. Time resolved determination of
protein adsorption using Quartz-Crystal Microgravimetry with
Dissipation Monitoring (QCM-D), in: J. Breme, C.J. Kirkpatrick, R.
Thull (Hrsg.), Metallic Biomaterial Interfaces (Monographie), Wiley,
2008.
A. Ewald, P. Elter, R. Thull: Characterisation of Surface-dependent
protein adsorption; in: J. Breme, C.J. Kirkpatrick, R.
Thull (Hrsg.), Metallic Biomaterial Interfaces (Monographie), Wiley,
2008.
A. Ewald, R. Thull: Surface structure-dependent protein expression in
adsorbed cells; in: J. Breme, C.J. Kirkpatrick, R.
Thull (Hrsg.), Metallic Biomaterial Interfaces (Monographie), Wiley,
2008.
D. Tebbe, U. Gbureck, R. Thull: Modifying Titanium Surfaces with
Glycoaminglycanes for Hemocompatibility, in: J. Breme, C.J. Kirkpatrick, R.
Thull (Hrsg.), Metallic Biomaterial Interfaces (Monographie), Wiley,
2008.
R. Thull, U. Gbureck: "Biomaterialien", Enzyklopädie
Naturwissenschaft und Technik, ecomed 2003, Landsberg/Lech, S. 1-7.
R. Thull, U. Gbureck, F. Macionczyk: Surface modifications on metals
for hard and soft tissue contact, Nova Acta Leopoldina NF 84, Nr. 321,
121-136 (2001).
Top
K. Stuckensen, U. Gbureck, J. Groll: Production of materials having
an anisotropic structure. WO2013083844A2
C. Jolly, R. Hessler, A. Dhanasingh, J. Groll: Hydrogel-filled drug
delivery reservoirs. WO2010054308A1.
M. Moeller, J. Groll, M. Eberhardt: Novel biosensor system based on
recognition induced birefringence (RIB). EP 08022585.7 - 1223.
H. Rong, P. Greiwe, J. Groll, C. Mohr, M. Glesius, M. Moeller:
Silyl-functional linear prepolymers production and use thereof.
WO2009024449A1.
H. Rong, P. Greiwe, J. Groll, C. Mohr, M. Glesius, M. Moeller:
Production of multifunctional star prepolymers and mixtures of them for
use in coatings, detergents and surface treatment products.
WO2009024450A2.
Gbureck Uwe, Zubereitung für
Magnesiumammoniumphosphat-Zemente, Deutsche Patentanmeldung 2008, DE
102008010210A1
Barralet Jake, Gbureck Uwe: Bioactive implants having bioactive
substance; Patentanmeldung US 60/888,708 und PCT/CA2008/000248
H. Rong, S. Stumpe, M. Lueken, M. Weide, J. Groll, P. Greiwe: Cleaning
compositions for treating hard surfaces. WO2008068236A1.
H. Rong, J. Groll, P. Greiwe, G. Schechner, C. Mohr, M.
Möller:
Multifunctional star-shaped prepolymers for use in coatings. WO
2007096056A1.
M. Möller, J. Groll, T. Ameringer, C. Mourran, H. Rong, S.
Levi:
Arrays of immobilized biomolecules on hydrogel-forming surfaces,
production thereof, and use thereof. WO2005014695A1.
M. Möller, J. Groll, H. Rong, S. Levi: Microarrays of
immobilized biomolecules, production and use thereof. WO2005014852A1.
Barralet Jake, Gbureck Uwe, Thull Roger, Improved Calcium Phosphate
Bone Cements, WO002004103419A1
Top